Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

A new method for the generation of second-order random waves

In order to prevent the generation of spurious free sub- and superharmonics of random waves in a laboratory channel, the control signal for the wave board has to be derived according to a higher-order wave theory. An expression for this control signal has been derived with the perturbation method of multiple scales. It is much less complex and requires less computation time than the expressions obtained from the full second-order theory. The new method for second-order subharmonics was verified experimentally for waves with bichromatic and continuous first-order spectra. The data were analysed with the complex-harmonic principal-component analysis to reduce the influence of noise.     

Flow and deposition of pyroclastic granular flows: A type example from the 1975 Ngauruhoe eruption,New Zealand

Small-volume pyroclastic density currents (PDCs) are generated frequently during explosive eruptions with little warning. Assessing their hazard requires a physical understanding of their transport and sedimentation processes which is best achieved by the testing of experimental and numerical models of geophysical mass flows against natural flows and/or deposits. To this end we report on one of the most detailed sedimentological studies ever carried out on a series of pristine small-volume PDC deposits from the 1975 eruption of Ngauruhoe volcano, whose emplacement were also witnessed during eruption. Using high-resolution GPS surveys, a series of lateral excavations across the deposits, and bulk sedimentological analysis we constrained the geomorphology, internal structure and texture of the deposits with respect to laterally varying modes of deposition.     

The use of riparian vegetated filter strips to reduce river sediment loads: an overestimated control measure?

The spatially distributed soil erosion and sediment delivery model WATEM/SEDEM was used to simulate the impact of riparian vegetated filter strips (RVFSs) on river sediment delivery at different spatial scales. For a field plot with a straight slope, sediment reduction by the RVFSs is comparable to results obtained through experimental set‐ups elsewhere (i.e. >70%). However, at the scale of an entire catchment, sediment reduction is much less (i.e. ±20%) due to (1) overland flow convergence, which reduces the sediment trapping efficiency of an RVFS, and (2) because part of the sediment bypasses the RVFSs through ditches, sewers and road surfaces. These results suggest that, at the catchment scale, RVFSs should be accompanied with other conservation techniques that are more appropriate for reducing river sediment loads, and that also reduce on‐site soil erosion. Copyright © 2006 John Wiley & Sons, Ltd.     

Ein stratiformes Fluoritvorkommen im Zechsteindolomit bei Eschwege und Sontra in Hessen

Zusammenfassung Im Hauptdolomit (Ca₂) und im Plattendolomit (Ca₃) des mittleren Zechsteins bei Eschwege und Sontra in Hessen wurde 1974 erstmals Fluorit entdeckt. Durch Bohrungen, chemische und geochemische Untersuchungen konnte nachgewiesen werden, daß im Hauptdolomit der Fluorit schichtgebunden, gelegentlich in dunklen Lagen und Linsen bis 0,5 m mächtig, makroskopisch sichtbar auftritt. Häufiger kommt er in 18–20 m mächtigen Zonen vor, die aber wegen des geringen Fluoritgehaltes von unter 10 % CaF₂ sich von dem grauweißen Dolomit ohne Fluorit nicht unterscheiden.In den dunklen bis schwarz gefärbten Lagen schwanken die Fluoritgehalte zwischen 10 und 50 % CaF₂. Einzelproben enthalten bis 80 % CaF₂. Die Dunkelfärbung ist teils durch den Gehalt von violettem Fluorit, mehr noch durch Bitumen bedingt.Fluorit wurde ferner im stratigraphisch höher gelegenen Plattendolomit (Ca₃) der Leine-Serie Z3 gefunden. In Aufschlüssen und Steinbrüchen in der Nähe von Sontra enthält der Plattendolomit lokal 1–4 % CaF₂.Die makro- und mikroskopisch sichtbare Wechsellagerung von Fluorit und Dolomit mit einem deutlichen Lagengefüge und das Fehlen von hydrothermalem Fluorit und anderen Mineralien auf Gängen und Klüften sind Beweise für eine synsedimentäre Bildung des Fluorites im Hauptdolomit (Ca₂) und Plattendolomit (Ca₃) in Hessen. Für den Hauptdolomit wird angenommen, daß er spätdiagenetisch entstanden ist. Dies dürfte auch für den Fluorit zutreffen. Als Bildungsbereich werden flache Lagunen mit salinärer Fazies angenommen. Das Fluor stammt aus dem normalen Gehalt des Meerwassers. Es muß aber angenommen werden, daß der Fluorgehalt des Meerwassers durch Zufuhr von Fluor aus dem Festlande, z. B. aus den fluorreichen Graniten des Harzes merklich erhöht wurde. Nur so sind die großen Fluoritmengen im Zechsteindolomit in Hessen zu erklären. Sie werden auf 5–7·10⁶ + CaF₂ geschätzt.

---

In 1974, fluorite was detected for the first time in the Hauptdolomit (Ca₂) and in the Plattendolomit (Ca₃) of the Middle Zechsteinformation near Eschwege and Sontra, Hessia. It was confirmed by means of drilling, chemical and geochemical investigations that the fluorite in the Hauptdolomit is stratabound. It occurs both locally in the form of macroscopic dark layers and lenses of up to 0,5 m thickness and moreoften, as zones up to 18–20 m thick which cannot macroscopically be distinguished from the greyish white dolomite without fluorite because of the low CaF₂ content (less than 10 %).The fluorite contents vary between 10 an 50 % CaF₂ in the dark black layers. Special samples may contain up to 80 % CaF₂. The dark colour derives partly from the lilac fluorite but to a greater degree from bitumous material.Fluorite has also been detected in the stratigraphically higher Plattendolomit (Ca₃) of the Leine-Series Z 3. Outcrops and quarries near Sontra have local contents of 1–4 % CaF₂.The macroscopic and microscopic interstratification of fluorite and dolomite with clear layer textures and the absence of hydrothermal fluorite and other minerals in veins of fissures are evidence for a synsedimentary formation of the fluorite in the Hauptdolomit (Ca₂) and the Plattendolomit (Ca₃). The Hauptdolomit is thought to have developed during late diagenesis. This should be valid for the fluorite, too. Shallow lagoons of a salinar facies are thought to have been the depositional environment. The fluorite precipitated from the sea waters, which were apparently enriched in fluorine by erosion at the fluorine rich granites of the Harz mountains. This is the only obvious explanation of the large amounts of fluorine in the Zechstein dolomite, estimated at 5–7×10⁶ tonnes CaF₂.

---

Résumé En 1974, de la fluorine fut découverte dans la dolomie dite »Hauptdolomit« (Ca₂) et dans la dolomie dite »Plattendolomit» (Ca₃) du Zechstein moyen, près d'Eschwege et de Sontra, en Hesse. Les sondages effectués ainsi que les analyses chimiques et géochimiques ont montré que la fluorine se rencontre de façon stratiforme dans la »Hauptdolomit«, quelquefois en couches et lentilles foncées d'une épaisseur maximale de 0,5 m, ou elle est visible macroscopiquement. La fluorine est souvent présente en faibles teneurs (moins de 10% de CaF₂) dans des couches de 18 à 20 m d'épaisseur; de ce fait, ces dernières ne se distinguent pas de la dolomie gris-blanche exempte de fluorine.La teneur en fluorine varie de 10 % à 50% de CaF₂ dans les couches foncées à noires. Certains échantillons renferment jusqu'à 80% de CaF₂. La coloration foncée est due en partie à la fluorine violette, mais plus encore à la présence de bitume.De la fluorine fut également localisée dans la »Plattendolomit« (Ca₃) de la »LeineSerie Z 3«, qui est située à un niveau stratigraphique supérieur. Cette »Plattendolomit« telle qu'on la rencontre dans les affleurements et carrières des environs de Sontra, contient de 1–4% de CaF₂.L'alternance de fluorine et de dolomie qui, avec sa structure en couches nettement développées, est visible tant macroscopiquement que microscopiquement, ainsi que l'absence de fluorine hydrothermale et d'autres minéraux dans les filons et cassures, sont considérées comme preuves de la formation syn-sédimentaire de la fluorine dans la »Hauptdolomit« (Ca₂) et dans la »Plattendolomit« (Ca₃) de la Hesse. On suppose que la formation de la »Hauptdolomit« est diagénétique tardive. Cette hypothèse devrait également s'appliquer à la fluorine. Il est probable que ce processus a eu lieu dans les lagunes peu profondes à faciès salin. Le fluor provient de l'eau de mer à teneur normale. On peut cependant supposer que la teneur en fluor de l'eau de mer s'est accrue suite à l'apport de fluor provenant du continent, p.ex. à partir de granites riches en fluor du Harz. C'est seulement ainsi que peuvent s'expliquer les grandes quantités de fluorine de la dolomie du Zechstein, en Hesse. Elles sont évaluées entre 5 et 7 · 10⁶ de CaF₂.

---

(Ca₂) (Ca₃) . , , , 0,5 . 18–20 , - — CaF₂ 10% — , . 10 50% CaF₂. 80% CaF₂. , . (Ca₃). 1–4% CaF₂. , , ; , . , Ca₂ . . , . . , ., , . . 5–7 × 10⁶ CaF₂.

---

---

Unserem Lehrer, Herrn Professor Dr. Georg Fischer, München, zum 80. Geburtstag gewidmet.     

Knowledge diffusion from GIScience to other fields: the example of the usage of weighted surface networks in nanotechnology

This article demonstrates how the generalisation of topographic surfaces has been formalised by means of graph theory and how this formalised approach has been integrated into an ISO standard that is employed within nanotechnology. By applying concepts from higher-dimensional calculus and topology, it is shown that Morse functions are those mappings that are ideally suited for the formal characterisation of topographic surfaces. Based on this result, a data structure termed weighted surface network is defined that may be applied for both the characterisation and the generalisation of the topological structure of a topographic surface. Hereafter, the focus is laid on specific issues of the standard ISO 25178-2; within this standard change trees, a data structure similar to weighted surface networks, are applied to portray the topological information of topographic surfaces. Furthermore, an approach termed Wolf pruning is used to simplify the change tree, with this pruning method being equivalent to the graph-theoretic contractions by which weighted surface networks can be simplified. Finally, some practical applications of the standard ISO 25178-2 within nanotechnology are discussed.     

Will the Clean Development Mechanism be effectively implemented in China?

Abstract

The purpose of this article is to analyse whether the presence of surplus emission allowance trading jeopardizes the environmental target of an international environmental agreement. We argue that surplus emission allowance trading can be used as an implicit side-payment mechanism to actually bring about higher environmental protection compared with the situation without the trade option. We point to the existence of a fundamental trade-off between costs of compliance and the creation of dynamic incentives to develop cheaper reduction technologies. Implicit side payments, in terms of surplus emission allocations, may be needed in order to establish a compromise between these opposing demands. We identify the shortcomings and benefits of allowing fully flexible permit trading, including the allocation rule of grandfathering.