Sublethal effects of hydrogen sulfide in sediments on the Urchin Lytechinus pictus

Laboratory exposures of the urchin Lytechinus pictus to sediment dosed with varying concentrations of hydrogen sulfide (H₂S), but without elevated organic material, were conducted. Changes in mortality, behavior, growth and gonad production were measured during 49 days' flow through exposures. Hydrogen sulfide concentrations of 165·8 μ liter⁻¹ in pore water caused significant changes in all parameters measured. Concentrations as low as 32·9 μ liter⁻¹ caused significant decreases in wet weight and male gonad production. A concentration of 91·8 μ liter⁻¹ caused the mortality rate to increase 100-fold over control exposures (0·63 μ liter⁻¹). Sublethal effects on growth and gonad production could have been caused by either direct biochemical inhibition by H₂S or secondarily through behavioral modifications. Hydrogen sulfide concentrations above 165·8 μ liter⁻¹ are common near sewage outfalls and could contribute to changes in species composition and sediment toxicity that occur there.     

Impacts of stormwater discharges on the nearshore benthic environment of Santa Monica Bay

Although large loads of potentially toxic constituents are discharged from coastal urban watersheds, very little is known about the fates and eventual impacts of these stormwater inputs once they enter the ocean. The goal of this study was to examine the effects of stormwater discharges on the benthic marine environment of Santa Monica Bay. Sediment samples were collected across a gradient of stormwater impact following significantly sized storm events offshore Ballona Creek (a predominantly developed watershed) and Malibu Creek (a predominantly undeveloped watershed). Sediments offshore Malibu Creek had a greater proportion of fine-grained sediments, organic carbon, and naturally occurring metals (i.e., aluminum and iron), whereas sediments offshore Ballona Creek had higher concentrations of anthropogenic metals (i.e., lead) and organic pollutants (i.e., total DDT, total PCB, total PAH). The accumulation of anthropogenic sediment contaminants offshore Ballona Creek was evident up to 2 km downcoast and 4 km upcoast from the creek mouth and sediment concentrations covaried with distance from the discharge. Although changes in sediment texture, organic content, and an increase in sediment contamination were observed, there was little or no alteration to the benthic communities offshore either Ballona or Malibu Creek. Both sites were characterized as having an abundance, species richness, biodiversity and benthic response index similar to shallow water areas distant from creek mouths throughout the Southern California Bight. There was not a preponderance of pollution tolerant, nor a lack or pollution sensitive, species offshore either creek mouth.     

Biodiversity and studies of marine symbiotic siphonostomatoids off South Africa

Current knowledge of the biodiversity of the symbiotic marine siphonostomatoids from South African waters (136 species) is sparse compared to that globally (1 388 species). The difference is especially apparent when taking into account the diversity of fish (more than 2 000 species) and invertebrates (approximately 12 914 species) found in South African waters, all of which are all potential hosts of symbiotic siphonostomatoids. Most reports of symbiotic siphonostomatoids from South African waters are from Chondrichthyes and represent 80% of the currently known families and about 66% of the known genera. Taxonomic studies on the siphonostomatoids also provide information about their morphology, biology, habitat preference and host association, as well as the distribution of species and their associated host taxa. Molecular analysis, especially sequencing, provides additional information on the existence of cryptic species and population structure, but has high financial costs and a very low success rate in DNA isolation and PCR amplification. Reported declines in abundance of piscivorous fish species, for example, as a result of fishing pressure, with possible synergistic effects of environmental changes, and also the reported potential effects of anthropogenic and climate change on the broader coastal biota, may result in the loss of siphonostomatoid species before they can be described. Furthermore, in South Africa, there is a lack of professional taxonomists to study poorly known groups and this situation will not improve while research emphasis remains on commercially important groups and while taxonomic studies are not recognised for their value in research programmes.     

Modifications of resonant column and torsional shear device for the large strain

Conventional RC/TS (resonant column and torsional shear) devices use a specimen with an aspect ratio (height-to-diameter) of 2:1 and this generates a maximum shear strain in the sample of about 1.5% at the maximum rotation of the driving system. The objective of this study is to modify the RC/TS device to generate higher strain amplitude. The modifications include a new base pedestal to overcome the limitations in the travel of the drive system and modification of the coil wiring to increase torque. The effects of the new coil wire on torque in the electromagnetic drive system were evaluated and the application of the modified device was illustrated using sand soil.     

ASD field hyperspectral measurements for discrimination of the ferruginous rocks and the iron ore types at El Gedida-Ghorabi area,Bahariya Oasis,Western Desert,Egypt

The ironstone succession at El Gedida-Ghorabi-Naser area of El Bahariya depression is subdivided into lagoonal manganiferous mud and fossiliferous ironstone consisting mainly of hematite and goethite-hydrogoethite. The application of the ASD field spectroradiometer measurements (spectral range) in the ASTER data led to the interpretation of the presence of ferruginous units as quartzitic sandstone, gluconitic sandy clay, and pink marly limestone. The existing iron ore minerals in the iron ore localities were also classified into high Mn hematite, low Mn hematite, goethite, hydrogoethite as well as low- and high-grade Hematite and Barite. Quartz, feldspars, rutile, and clay minerals (e.g., kaolinite and illite) are mainly associated with the iron ore. Accessory minerals of manganese, e.g., psilomelane and pyrolusite, were also present. The Barite mineral is recorded as a common mineral association with the iron ore deposits at El Gedida and Ghorabi localities. The stratigraphical units investigated in the study area include the oldest gravely clayey sandstones of the Bahariya Formation overlain by the fossiliferous and oolitic limestones of the El-Hamra, Qazzun, and Naqb Formations. Quartztic sandstones and clayey sandstones of the Radwan Formation and youngest Quaternary sediments of sandy-clayey materials were often found as intermittent cover and overburden in unconformity surfaces over the iron ore bands.     

Regional Fluxes Of Momentum And Sensible Heat Over A Sub-Arctic Landscape During Late Winter

Based on measurements at Sodankylä Meteorological Observatory the regional (aggregated) momentum and sensible heat fluxes are estimated for two days over a site in Finnish Lapland during late winter. The forest covers 49% of the area. The study shows that the forest dominates and controls the regional fluxes of momentum and sensible heat in different ways. The regional momentum flux is found to be 10–20% smaller than the measured momentum flux over the forest, and the regional sensible heat flux is estimated to be 30–50% of the values measured over a coniferous forest.The regional momentum flux is determined in two ways, both based on blending height theory. One is a parameterised method, the other represents a numerical solution of an aggregation model. The regional sensible heat flux is determined from the theory of mixed-layer growth. At near neutral conditions the regional momentum flux can be determined independently of the regional sensible heat flux. At unstable conditions the two models become coupled.The information that is needed by the parameterised blending height method and by the mixed-layer evolution method in order to derive the regional fluxes of momentum and sensible heat can be obtained from radiosonde profiles of wind speed and temperature.     

Toxicity assessment of sediment cores from Santa Monica Bay,California

During the summer of 1997, sediment core samples were taken at 25 stations in Santa Monica Bay. Toxicity testing was performed on 4-cm sections of the entire length of each core using purple sea urchin fertilization and amphipod survival tests. The sea urchin test identified sections as being toxic at six stations, all located near current or former Hyperion Treatment Plant (HTP) wastewater outfall locations. The amphipod test identified sections from 17 stations as having toxic sediments. The stations having toxic sediments were scattered throughout the bay and toxicity was identified at numerous core depths. Spatial and temporal patterns indicated that toxicity was most strongly associated with the historical disposal of municipal wastewater sludge. Many of the sections toxic to the amphipods did not have chemical levels expected to cause toxicity and were in locations where a source of toxicity was not apparent.     

Comparing mixing-length models of the diabatic wind profile over homogeneous terrain

Models of the diabatic wind profile over homogeneous terrain for the entire atmospheric boundary layer are developed using mixing-length theory and are compared to wind speed observations up to 300 m at the National Test Station for Wind Turbines at Høvsøre, Denmark. The measurements are performed within a wide range of atmospheric stability conditions, which allows a comparison of the models with the average wind profile computed in seven stability classes, showing a better agreement than compared to the traditional surface-layer wind profile. The wind profile is measured by combining cup anemometer and lidar observations, showing good agreement at the overlapping heights. The height of the boundary layer, a parameter required for the wind profile models, is estimated under neutral and stable conditions using surface-layer turbulence measurements, and under unstable conditions based on the aerosol backscatter profile from ceilometer observations.     

Gaussian Process Emulators for Computer Experiments with Inequality Constraints

Physical phenomena are observed in many fields (science and engineering) and are often studied by time-consuming computer codes. These codes are analyzed with statistical models, often called emulators. In many situations, the physical system (computer model output) may be known to satisfy inequality constraints with respect to some or all input variables. The aim is to build a model capable of incorporating both data interpolation and inequality constraints into a Gaussian process emulator. By using a functional decomposition, a finite-dimensional approximation of Gaussian processes such that all conditional simulations satisfy the inequality constraints in the entire domain is proposed. To show the performance of the proposed model, some conditional simulations with inequality constraints such as boundedness, monotonicity or convexity conditions in one and two dimensions are given. A simulation study to investigate the efficiency of the method in terms of prediction is included.