湖南省似大地水准面2017模型及精度分析

利用近7万个湖南及邻近省份重力观测数据、502个GNSS/水准控制点及数字高程模型，以EIGEN-6C4全球重力场模型作参考重力场，采用顾及地球曲率影响的各类地形质量位及引力的第二类Helmert凝集法严密算法，利用高分辨率地形数据恢复甚短波扰动重力场，确定空间分辨率2′×2′的高精度湖南省似大地水准面模型（HNGG2017）。经外部检核，模型整体精度均优于±0.022 m。与历史模型相比，新模型在湖南北部常德汉寿、西南部永州江永等地区精度得到显著改善。     

宣郁通经汤合少腹逐瘀汤加减治疗子宫内膜异位症痛经48例总结

目的：观察宣郁通经汤合少腹逐瘀汤加减治疗子宫内膜异位症痛经的临床疗效。方法：将96例子宫内膜异位症痛经患者随机分为2组，每组各48例。治疗组予宣郁通经汤合少腹逐瘀汤加减治疗，对照组予米非司酮治疗，疗程均为4个月。比较2组综合疗效及治疗前后痛经积分的变化情况。结果：总有效率治疗组为93.75%，对照组为75.00%，2组比较，差异有统计学意义（P<0.05）；2组痛经积分治疗前后组内比较及治疗后组间比较，差异均有统计学意义（P<0.01）。结论：宣郁通经汤合少腹逐瘀汤加减治疗子宫内膜异位症痛经较单用米非司酮治疗效果更好。     

顾及地类转换差异的城市空间扩展元胞自动机模型及应用研究

元胞自动机模型已经成为城市空间扩展模拟研究的重要方法之一,并得到广泛应用。然而,现有的城市扩展元胞自动机模型仍存在不足。由于元胞状态设置较为简单,从而使模型转换规则中对不同用地类型向城市用地转换的差异与强度考虑不够。基于此本文在元胞自动机模型的框架下,设计了多元结构的元胞状态及转换规则,提出了顾及地类转换差异与强度的城市扩展元胞自动机模型。在计算非城市用地向城市用地转换的转换概率时,该模型考虑了3个方面的概率：① 地形地貌、经济发展等城市发展的驱动因素对城市用地扩展的影响概率,该概率采用logistics方法进行计算;② 邻域元胞的用地类型对中心元胞转换概率的影响,该概率采用扩展摩尔型方法进行计算;③ 不同类型的非城市用地（本研究中包括耕地、林地和裸地3种类型）向城市用地转换的强度,该概率由模拟基期土地利用数据与目标年份土地利用数据的叠加,得出不同类型的非城市用地在此时间段内向城市用地转换的规模,进而确定不同类型的非城市用地向城市用地转换的强度。最后,将以上3种概率的乘积作为元胞转换的概率。通过转换概率与转换阈值的对比判断中心元胞是否在下一个阶段转换为城市用地。经过迭代计算,不断增加城市用地元胞的数量。当模拟城市用地的结果与目标年份的城市用地规模差值在一定的范围内时停止模拟,得出最终结果。模型构建完成后,本文以长株潭城市群核心区为例进行了模拟实验。以2001年该地区的土地利用数据为基期数据,模拟2010年该地区的城市用地规模和空间分布。研究结果表明,根据本文提出的模型模拟的城市扩展结果与真实数据相比具有较高的一致性。模拟结果正确率达到68.66%,比基于传统logistics回归的元胞自动机模型的模拟精度提高了4.25%,Kappa系数为0.675。该模型较好地模拟了长株潭城市群核心区城市扩展,在城市空间扩展模拟中具有较好的适应性与有效性。     

紫外-可见分光光度法测定多花黄精多糖含量

目的：测定湖南洪江国家黄精标准化基地多花黄精中的多糖含量，为多花黄精的进一步开发利用及药材质量标准研究奠定基础。方法：以葡萄糖为标准品，采用硫酸-蒽酮试剂显色，应用紫外-可见分光光度法测定多花黄精多糖含量。结果：葡萄糖在3.28～19.68μg/mL范围内线性良好（r=0.9992），多花黄精多糖平均含量为8.05%。结论：洪江种植基地的多花黄精品质优良，洪江是道地黄精药材种植理想基地。     

Smectite formation in metalliferous sediments near the East Pacific Rise at 13°N

A 43 cm long E271 sediment core collected near the East Pacific Rise(EPR) at 13°N were studied to investigate the origin of smectite for understanding better the geochemical behavior of hydrothermal material after deposition.E271 sediments are typical metalliferous sediments. After removal of organic matter, carbonate, biogenic opal,and Fe-Mn oxide by a series of chemical procedures, clay minerals(2 μm) were investigated by X-ray diffraction,chemical analysis and Si isotope analysis. Due to the influence of seafloor hydrothermal activity and close to continent, the sources of clay minerals are complex. Illite, chlorite and kaolinite are suggested to be transported from either North or Central America by rivers or winds, but smectite is authigenic. It is enriched in iron, and its contents are highest in clay minerals. Data show that smectite is most likely formed by the reaction of hydrothermal Fe-oxyhydroxide with silica and seawater in metalliferous sediments. The Si that participates in this reaction may be derived from siliceous microfossils(diatoms or radiolarians), hydrothermal fluids, or detrital mineral phases. And their δ30 Si values are higher than those of authigenic smectites, which implies that a Si isotope fractionation occurs during the formation because of the selective absorption of light Si isotopes onto Feoxyhydroxides. Sm/Fe mass ratios(a proxy for overall REE/Fe ratio) in E271 clay minerals are lower than those in metalliferous sediments, as well as distal hydrothermal plume particles and terrigenous clay minerals. This result suggests that some REE are lost during the smectite formation, perhaps because their large ionic radii of REE scavenged by Fe-oxyhydroxides preclude substitution in either tetrahedral or octahedral lattice sites of this mineral structure, which decreases the value of metalliferous sediments as a potential resource for REE.     

Enhanced a novel β-agarase production in recombinant Escherichia coli BL21(DE3) through induction mode optimization and glycerol feeding strategy

Agarases are hydrolytic enzymes that act on the hydrolysis of agar and have a broad range of applications in food,cosmetics and pharmaceutical industries. In this study, a glycerol feeding strategy based on induction mode optimization for high cell density and β-agarase production was established, which could effectively control acetate yield. First, exponential feeding strategy of glycerol with different overall specific growth rates(μ) was applied in the pre-induction phase. The results showed that the low μ(μ=0.2) was suggested to be the optimal for cell growth and β-agarase production. Second, the effects of induction temperature and the inducer concentration on cell growth and β-agarase production were investigated in the post-induction phase. When induced by isopropyl-β-d-thiogalactoside(IPTG), the strategy of 0.8 mmol/L IPTG induction at 20℃ was found to be optimal for β-agarase production. When cultivation was induced by continuous lactose feeding strategy of 1.0 g/(L·h), the β-agarase activity reached 112.5 U/mL, which represented the highest β-agarase production to date.Furthermore, the β-agarase was capable of degrading G. lemaneiformis powder directly to produce neoagarooligosaccharide, and the hydrolysates were neoagarotetraose(NA4) and neoagarohexaose(NA6). The overall research may be useful for the industrial production and application of β-agarase.     

1970-2016年青藏高原岗扎日冰川变化与物质平衡遥感监测研究

可可西里处于青藏高原腹地,是青藏高原自然环境的交接与过渡地带。近年来该区域冰川物质平衡可能有从西向东由正转负的趋势,但是其过渡地带岗扎日地区冰川状态未知。本研究利用地形图、SRTM、ASTER和Landsat等资料分析了岗扎日地区冰川面积变化和物质平衡变化,并对可可西里地区冰川变化空间规律进行了探讨,结果表明：①1970-2016年岗扎日冰川总面积年均缩小率为0.08±0.02%。2006年后冰川退缩趋势减缓。②1970-2012年岗扎日冰川平均减薄-8.64±0.30 m,体积减少1.45±0.06 km³,平均物质平衡为-0.21±0.01 m w.e. a^-1。冰川物质平衡趋势由负转正（1970-1999年：-0.34±0.01 m w.e. a^-1;1999-2012：0.16±0.02 w.e. a^-1）。③东南、南、西南朝向作为迎风坡,1970年以来其冰川物质亏损较小,1999-2012年呈现强烈的正平衡。冰川面积变化滞后于物质平衡变化,东朝向和东南朝向冰川面积缩小率最大,主要是因为冰川冰舌较长,末端所处的海拔较低。④气温升高是岗扎日冰川1970-1999年呈现负物质平衡状态的主因,降水增多是1999-2012年正平衡状态的主因。⑤可可西里地区冰川1970s以来面积年均缩小率从西向东不断增大、物质平衡下降,与西风环流和季风环流相关,但局地气候也影响冰川变化和物质平衡。     

地壳对海洋潮汐的响应

应用三维动态有限元方法研究了中国北部地区的地壳对邻近的渤海与黄海海平面变化的响应。虽然此应力场过于微弱不足以引发地震，但发现应力集中的位置及应力场变化较大的位置恰好与某些现代地震的震中一致。这一结果表明研究地壳对广泛分布的载荷的响应对研究区域地震构造是有帮助的。     

Fluid Inclusion Feature of Gold-Bearing Quartz Veins from the Jinniushan Gold Deposit, Shandong, China

The auriferous veins at Jinniushan occurs within the Jinniushan faulted zone in the Kunyushan Granite. Optical observation reveals that gold ore body formed during the main stage of hydrothermal activity. Detailed geothermometric studies of fluid inclusions from the veins show that the forming temperature ranges between 130℃ and 370℃ and the salinity is from 4.01 to 15.21 wvt percent NaCl. The ore-forming fluid is featured by low to moderate salinity, and low to moderate temperature. According to investigations of the values of vapor/liquid and temperatures of the ore-forming fluids, we propose that the boiling fluid inclusions exist in the main mineralization stages. Fluid boiling is suggested as a mechanism for the precipitation of gold from the hydrothermal fluid in the Jinniushan gold deposit.     

Tanlu Fault Zone and Gold Ore Metallogenesis

Tanlu Fault Zone (TFZ) is a large NE trending deep fracture system in East China and is about 2500 km long. It extends from the south of Lujiang to Tancheng, and passes through the Bohai Sea and continues to the north, where it branches into Yilan ?Shulan Fault and Dunhua ?Mishan Fault. TFZ is a long lasting huge deep - rooted lithospherical fault system with different characteristics in different parts and at different periods of its evolution. TFZ also controls the distribution and occur-rences of many superlarge, large, middle and small sized gold ore deposits, e. g. Jiapigou, Haigou, Xiaoxihancha and Ciwei-gou gold deposits in Northeast China; Linglong, Jiaojia, Sanshandao, Taishang, Xincheng, Rushan, and Pengjiakuang gold deposits in Jiaodong Peninsula of Shandong Province; and Guilaizhuang and Yinan in Western Shandong Province.