Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.     

On mass transport in deep water waves

Summary Various formulations of the mass-transport problem are compared for progressive waves in deep water. In order to calculate the mass-transport velocity as a function of depth in the main body of the fluid, it is necessary to include the effect of viscous wave attenuation. It is shown that the usual assumptions of periodicity in distance and attenuation with time or periodicity in time and attenuation with distance, are both physically unsatisfactory. The first does not specify a unique solution, and the second is incompatible with the assumption of zero surface stress. A certain critical constant tangential wind stress will maintain strictly time-periodic deep water waves. The corresponding attenuation with distance is then calculated to order ³. A constant tangential stress greater or less than the critical causes waves, necessarily decaying with distance, to grow or decay with time.     

A multi-proxy reconstruction of spatial and temporal variations in Asian summer temperatures over the last millennium

To investigate climate variability in Asia during the last millennium, the spatial and temporal evolution of summer (June–July–August; JJA) temperature in eastern and south-central Asia is reconstructed using multi-proxy records and the regularized expectation maximization (RegEM) algorithm with truncated total least squares (TTLS), under a point-by-point regression (PPR) framework. The temperature index reconstructions show that the late 20th century was the warmest period in Asia over the past millennium. The temperature field reconstructions illustrate that temperatures in central, eastern, and southern China during the 11th and 13th centuries, and in western Asia during the 12th century, were significantly higher than those in other regions, and comparable to levels in the 20th century. Except for the most recent warming, all identified warm events showed distinct regional expressions and none were uniform over the entire reconstruction area. The main finding of the study is that spatial temperature patterns have, on centennial time-scales, varied greatly over the last millennium. Moreover, seven climate model simulations, from the Coupled Model Intercomparison Project Phase 5 (CMIP5), over the same region of Asia, are all consistent with the temperature index reconstruction at the 99 % confidence level. Only spatial temperature patterns extracted as the first empirical orthogonal function (EOF) from the GISS-E2-R and MPI-ESM-P model simulations are significant and consistent with the temperature field reconstruction over the past millennium in Asia at the 90 % confidence level. This indicates that both the reconstruction and the simulations depict the temporal climate variability well over the past millennium. However, the spatial simulation or reconstruction capability of climate variability over the past millennium could be still limited. For reconstruction, some grid points do not pass validation tests and reveal the need for more proxies with high temporal resolution, accurate dating, and sensitive temperature signals, especially in central Asia and before AD 1400.     

A practical co-simulation approach for multiscale analysis of geotechnical systems

The particulate nature of granular soils can be accurately simulated at a microscale level. However, due to the huge spatial extent of geotechnical systems, a model fully constructed at such a scale is almost impossible with current computing technologies. Hence, continuum-based approaches are considered as the practical scale for modeling the majority of problems. Combining both scales enables benefiting from the advantages of both techniques while trying to overcome their drawbacks. Although a significant number of publications have addressed coupling both scales, only a few provide information regarding implementing the proposed procedures. In this study, an efficient co-simulation framework for conducting multiscale analysis is introduced. The framework is based on integrating existing continuum and micromechanical modeling software packages and therefore benefitting from already existing codes. A computational simulation of a rigid pile in contact with granular soil demonstrating the capabilities of such technique is presented. The near-field zone surrounding the pile is modeled using DEM whereas FEM is utilized to model far-field zones that are not affected by the presence of the pile. Results of conducted simulations resemble those obtained from experimental results. The proposed approach appears to be a very effective and promising tool to model boundary value problems of geotechnical systems.     

Estimation of aquifer hydraulic parameters from surface geophysical measurements: a case study of the Upper Cretaceous aquifer, central Sinai, Egypt

The integration of geophysical data with direct hydrogeological measurements can provide a minimally invasive approach to characterize the subsurface at a variety of resolutions and over many spatial scales. The field of hydrogeophysics has attracted much attention during the last two decades. In this domain, the geophysical data inverted to geophysical models are interpreted in terms of the hydrogeology to serve as a basis for the definition of hydraulic models in the areas of interest. The hydraulic conductivity (K) value measured in a reference borehole has been combined with the electrical conductivity obtained from nearby geo-electromagnetic sounding data in the Cenomanian (Upper Cretaceous) aquifer, central Sinai, Egypt. The resulting relation was interpreted with Dar Zarrouk parameters to infer the transmissivity variations at other vertical electrical sounding locations, where K values are unknown. Coincident transient electromagnetic data have been adopted to increase accuracy while interpreting the aquifer geoelectrical properties. The results indicate that the transmissivity values in the aquifer of interest vary from 2,446 to 9,694 m²/day, and K varies from 12.9 to 57.0 m/day throughout the studied area.     

Integrated geoelectrical survey for groundwater and shallow subsurface evaluation: case study at Siliyin spring, El-Fayoum, Egypt

Siliyin spring is one of the many natural fresh water springs in the Western Desert of Egypt. It is located at the central part of El-Fayoum Delta, which is a potential place for urban developments and touristic activities. Integrated geoelectrical survey was conducted to facilitate mapping the groundwater resources and the shallow subsurface structures in the area. Twenty-eight transient electromagnetic (TEM) soundings, three vertical electrical soundings (VES) and three electrical resistivity tomography (ERT) profiles were carried out around the Siliyin spring location. The dense cultivation, the rugged topography and the existence of infra structure in the area hindered acquiring more data. The TEM data were inverted jointly with the VES and ERT, and constrained by available geological information. Based on the inversion results, a set of geoelectrical cross-sections have been constructed. The shallow sand to sandy clay layer that forms the shallow aquifer has been completely mapped underneath and around the spring area. Flowing of water from the Siliyin spring is interconnected with the lateral lithological changes from clay to sand soil. Exploration of the extension of Siliyin spring zone is recommended. The interpretation emphasizes the importance of integrating the geoelectrical survey with the available geological information to obtain useful, cheap and fast lithological and structural subsurface information.     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

Assessment of H<Subscript>2</Subscript>S emission hazards into tunnels: the Nosoud tunnel case study from Iran

The presence of a gassy ground condition is an important problem in tunneling. In this study, the effects of groundwater H₂S and CH₄ emissions are investigated and characterized together with the factors that created these conditions in Nosoud tunnel in Iran. Through the geological investigations, the presence of these gasses was not detected prior to the construction of the tunnel. Groundwater sampling indicated that about 1 L of H₂S is released per 100 L of the water inflow into the Nosoud tunnel under normal conditions. However, the volume of the released gas was varying with the changes in the groundwater discharge rate. Thus, estimation of groundwater inflow into the tunnel is necessary for predicting the volume of gas emission. Based on the experience of the Nosoud tunnel excavations, there are several geological and hydrogeological factors that must be considered as the indicators of gas emissions during tunneling. Considering the importance of ground water gas emission into the tunnels located in gassy conditions, the present work was conducted to predict the H₂S seepage before the excavation using geological and hydrogeological indicators.     

利用瞬变电磁和多频电磁方法监测地下水位及其对Hawara遗址的影响

利用瞬变电磁（TEM）和地面电磁（GEM）方法,本文研究了埃及Hawara遗址区的地下水对遗址的影响.这个遗址包括Hawara金字塔、北区墓地、以及被称作“迷宫”的南区墓葬场所.现今Hawara遗址已经完全荒废,被耕作区和Bahr Wahba运河包围.地表水和地下水会破坏Hawara金字塔和“迷宫”遗址的地基,现在金字塔入口已被淹没至地面下约6 m深处.本文在耕作区、金字塔以及“迷宫”等三个地区进行了TEM勘察;在“迷宫”地区进行了GEM勘察.综合分析以上两种勘察数据,我们发现,农业灌溉是浸入到地下的水的主要来源;本地区地下水位随着观测点及海拔的不同,在地面以下2~7 m之间变化.