Hypocenter distribution and focal mechanism of AE events during two stress stage creep in Yugawara andesite

More than a thousand acoustic-emission (AE) hypocenters were determined in a cylindrical andesite specimen under two-stage uniaxial creep at stresses of 204 and 214 MPa. Strains were monitored for 6 peripheral points at the middle part of the cylindrical specimen's wall. The strain data indicate gradual increase of nonuniform deformation during steady creep and strong intensification of the nonuniformity during acceleration creep and, therefore, biased stress distribution within the specimen. The correlation between dilatant strain and AE hypocenters was investigated for whether or not tensile cracks emit AE. The region with high AE activity shows only a small dilatant strain. This negative correlation between AE and the dilatant region may eliminate tensile cracks as possible AE sources. A composite focal-mechanism solution of local AE events, covering a wide solid angle of the focal hemisphere, indicates that shear fractures emit AE waves. The direction of the compressional axis in this solution shows a significant deviation from that inferred from the applied external force, suggesting that the local stress field is governed by preexisting weak zones that are, presumably, produced by tensile cracks within the specimen. AE hypocenters tended to form clusters during steady creep under the constant compressional stress. During acceleration creep caused by a small step increase of the external stress, the preceding clusters disappeared while a new cluster appeared in an incipient fault plane. This suggests that changes in seismicity pattern such as migrations or quiescences of swarm—important clues for earthquake predictions—may be caused by an instantaneous change in the tectonic-stress levels.     

Seasonal variation in Tsushima Warm Current paths over the shelf off the San’in coast,Japan

Using long-term sea surface temperature (SST) and acoustic Doppler current profiler (ADCP) data, we examined variations in the current axis of the Tsushima Warm Current (TWC) off the San’in coast of Japan, near the entrance to the Japan Sea. There were large horizontal temperature gradients along the shelf edge in the southwestern Japan Sea from October to May, suggesting that the second branch of the TWC appears not only in spring and autumn but also in winter. From the ADCP data analysis, we found that currents with speeds of approximately 20 cm s^?1 and greater appeared around the shelf edge off San’in coast in all seasons. The SST and ADCP data analyses suggested that the second branch of the TWC exists around the shelf edge off the San’in coast throughout the year. This finding differed from those of previous studies. A relatively strong current (speed greater than 15 cm s^?1) appeared on the shore side in all seasons, except at line W in winter. This current might be the first branch of the TWC. The first branch seemed to occur around in 100 m isobaths, but shifted northward and southward because the bottom topography around lines W and M was relatively flat and the shelf was broad. The first branch was very obscure, and it was difficult to define the two branches of the TWC off the San’in coast from the seasonally averaged vectors. However, snapshots of current distribution derived from the ADCP data clearly showed these branches. Hence, both the first and second branches might occur throughout the year off the San’in coast.     

http://www.sciencedirect.com/science/article/pii/S1674987114000917

Important ecological changes of the Earth(oxidization of the atmosphere and the ocean) increase in nutrient supply due to the break-up of the super continent(Rodinia) and the appearance of multi-cellular organisms(macroscopic algae and metazoan) took place in the Ediacaran period,priming the Cambrian explosion.The strong perturbations in carbon cycles in the ocean are recorded as excursions in carbonate and organic carbon isotope ratio(δ~(13)C_(carb) and δ~(13)C_(org)) from the Ediacaran through early Cambrian periods.The Ediacaran-early Cambrian sediment records of δ~(13)C_(carb) and δ~(13)C_(org),obtained from the drill-core samples in Three Gorges in South China,are compared with the results of numerical simulation of a simple one-zone model of the carbon cycle of the ocean,which has two reservoirs(i.e.,dissolved organic carbon(DOC) and dissolved inorganic carbon(DIC).The fluxes from the reservoirs are assumed to be proportional to the mass of the carbon reservoirs.We constructed a model,referred to here as the Best Fit Model(BFM),which reproduce δ~(13)C_(carb) and δ~(13)C_(org) records in the Ediacaran-early Cambrian period noted above.BFM reveals that the Shuram excursion is related to three major changes in the carbon cycle or the global ecological system of the Earth:(1) an increase in the coefficient of remineralization by a factor of ca.100,possibly corresponding to a change in the dominant metabolism from anaerobic respiration to aerobic respiration,(2) an increase of carbon fractionation index from 25‰ to 33‰,possibly corresponding to the change in the primary producer from rock-living cyanobacteria to free-living macro algae,and(3) an increase in the coefficient of the organic carbon burial by a factor of ca.100,possibly corresponding to the onset of a biological pump driven by the flourishing metazoan and zooplankton.The former two changes took place at the start of the Shuram excursion,while the third occurred at the end of the Shuram excursion.The other two excursions are explained by the tentative decrease in primary production due to cold periods,which correspond to the Gaskiers(ca.580 Ma) and Bikonor(ca.542 Ma) glaciations.     

Effects of fluid displacement pattern on complex electrical impedance in Berea sandstone over frequency range 104–106 Hz

To better understand the effect of fluid distribution on the electric response of rocks saturated with oil and brine, we conducted experimental studies on the complex electrical impedance in a Berea sandstone, together with in situ acquisitions of oil distribution images employing a high‐resolution medical X‐ray computed tomography. We performed two tests of brine displacement by oil under high (10 MPa) and low (5 MPa) pressures, which were accompanied by fingering and stable displacement patterns, respectively. The measured complex impedance data were fitted to the Cole model to obtain the resistance, capacitance, peak frequency of the imaginary impedance, and the exponent α of the rock–fluid system. With increasing oil saturation, the resistance showed an increasing trend, whereas the other three parameters decreased. The fingering displacement exhibited lower resistance and capacitance than the stable displacement. The analysis of the resistance changes using a simple parallel connection model indicates that there are more components of residual brine in parallel connections in the fingering pattern than in the stable displacement pattern at the same saturation. We also interpreted the normalised changes in the capacitance (or apparent dielectric constant) with respect to the oil saturation via an analysis of the shape factor of fluid distribution based on the Maxwell–Wagner–Brugermann–Hanai model. The changes in the shape factor suggest that the pinch‐off of the brine in parallel connection by the oil is a dominant mechanism reducing the capacitance. In the stable displacement, most of the connections in the brine phase are immediately pinched off by oil displacement front at a local oil saturation of 65%. Conversely, in the fingering displacement, there is a transition from the bulk or layered brine to the pinched‐off at a local oil saturation below 60%. The analyses indicate that the difference in the fluid distribution under different fluid conditions is responsible for the non‐Archie behaviour.     

Log N — log S of radio sources at 10 GHz with flat spectra

A logN — logS relation at 10 GHz is constructed for sources with the flat spectra 0.5 (flux densitySv ^–) from observations at NRO, MPIfR and others. Based on the source distribution on log (Luminosity) volume plane we obtain an epoch-depending luminosity function which explains the above relation.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.Nobeyama Radio Observatory, a branch of the Tokyo Astronomical Observatory, University of Tokyo, is a facility open for general use by researchers in the field of astronomy and astrophysics.     

Bootstrap statistics for velocity tomography: application of a new information criterion1

A new information criterion, the extended information criterion (EIC) was applied in order to determine an optimum solution in simultaneous iterative reconstruction technique (SIRT) P-wave velocity tomography. The EIC is derived from information theory and statistics, and it measures the goodness-of-fit between the true (unknown) data distribution and the observed data distribution: the former gives the probability of data realization from the true (unknown) model, whereas the latter gives a probability of data realization calculated from a particular model of which parameters are estimated. The EIC is calculated using bootstrap statistics, a numerical technique for calculating statistical estimators. Bootstrap statistics enables us to obtain the bias between the log likelihood and the expected log likelihood, and then to obtain the expected log likelihood from the log likelihood. Since the EIC is obtained numerically, we can use it for most problems of model parameter estimation without employing the maximum likelihood method. Taking weak anisotropy into account, we reconstructed the P-wave velocity structure of a rock sample during water infiltration under differential stress loading conditions. The results indicate that we can remove unrealistic solutions sometimes encountered when too many iterations are made. In spite of much computation time, the EIC is a promising technique for the near future, prompted by the rapid progress in current computer technology.     

Analysis of dust events in 2008 and 2009 using the lidar network, surface observations and the CFORS model

The Asian dust events in 2008 (May 24–June 4 in 2008) and in 2009 (March 12–25, October 13–26, and December 15–28 in 2009) were analyzed with the lidar network observations, surface observations in China, Korea, Japan, and Mongolia, and with the chemical transport model CFORS. Transport of Asian dust and mixing of dust with air pollution aerosols were studied. The event of May 24 to June 4 in 2008 was a significant event unusually late in the spring dust season. The dust event of March 12–25, 2009 was an interesting example of elevated dust layer, and transport of dust from the elevated dust layer to the ground by the boundary layer activity was observed with the lidars and surface observations in Japan. The concentration of air pollution aerosols was relatively high during the dust event, and the results suggest that vertical structure as well as transport path is important for the mixing of dust and air pollution aerosols. The dust events in October and December 2009 were examples of dust events in autumn and winter. The online mode CFORS reproduced the observation data generally well, except for the event of May 24 to June 4 in 2008. The results of the fourdimensional variational assimilation of the lidar network data reproduced the dust concentration in Korea and Japan reasonably in that event.