Evolution of nappes in the eastern margin of the Bohemian Massif: a kinematic interpretation

The entire pile of nappes in the eastern margin of the Bohemian massif is characterized by two stages of Variscan nappe emplacement each exhibiting a different kinematic and metamorphic evolution.The older emplacement (D1) probably occurred around 350-340 Ma ago and was synmetamorphic. The nappes show a typical systematic superposition of higher grade metamorphic units over lower grade ones. Thus, the crystalline complexes showing a HT-MP Barrovian imprint (Svratka allochthonous unit and Moldanubicum) were thrust over an intermediate unit affected by MTMP recrystallization (Bíte orthogneiss and its country rock), and at the base of the D1 nappe pile the Inner Phyllite Nappe (Biý Potok Unit) is characterized by LT/LP metamorphism.The second stage of tectonic evolution (D2) is characterized by a thin-skinned northward-oriented nappe emplacement that occurred under LT-LP conditions dated at 320-310 Ma. The whole nappe sequence formed during the first tectonometamorphic period (D1) was transported northward over the autochthonous »Deblín polymetamorphic and granitic complex« of Upper Proterozoic age and its Devonian sedimentary cover with very low metamorphism. During this second tectonic event the Brno granite massif (580 Ma) was only marginally incorporated in the Variscan nappe tectonics which resulted in kilometer-scale cover and basement duplexes. The tectonic evolution of the nappe pile ended with stage D3, represented by large- to medium-scale east-vergent folds with limited displacement.

---

Zusammenfassung Der Deckenbau am Ostrand der Böhmischen Masse erfolgte in zwei aufeinanderfolgenden Stadien, die sich sowohl in ihrer Kinematik als auch in ihrer Metamorphoseentwicklung deutlich voneinander unterschieden.Die ältere Phase (D1 ca. 350-340 Ma) ist durch synmetamorphe Überschiebungen charakterisiert. Sie führt zu einer metamorphen Inversion der überschobenen Deckeneinheiten, so daß generell hohe metamorphe Einheiten schwach metamorphe tektonisch überlagern. Der Svratka Komplex und das Moldanubikum als hangendste Decken sind durch MP/HT Paragenesen vom Barrow-Typ gekennzeichnet. Beide Einheiten sind auf den MP/MT-metamorphen Bite-Gneis und seine Rahmengesteine überschoben. Die Bílý potok Einheit als liegende Decke zeigt nur noch eine LP/ LT Regionalmetamorphose.Das jüngere Stadium (D2 ca. 320-310 Ma) ist durch eine Thin-skinned Tektonik mit nordvergentem Deckentransport unter LP/LT Bedingungen charakterisiert. Der gesamte, invers metamorphe D1-Deckenstapel wird dabei nach N über den autochtonen Deblín Komplex bzw. seine devonische Sedimenthülle überschoben.Das Brno Granit Massiv (580 Ma) wird nur randlich in diesen variszischen Deckenbau einbezogen. Die tektonische Entwicklung endet mit einem mittel bis großräumigen E-vergenten Faltenbau (D3 phase).

---

Résumé L'empilement des nappes a la bordure orientale du Massif de Bohème est caractérisé par deux stades de mise en place présentant différentes évolutions cinématiques et métamorphiques.La tectonique majeure de mise en place des nappes crustales intervient lors d'un métamorphisme de type barrowien, calé autour de 350-340 Ma. L'empilement qui en résulte montre une superposition systématique d'unités à fort degré de métamorphisme sur des unités moins métamorphiques. Ainsi les complexes cristallins, montrant des reliques de métamorphisme de haute à moyenne pression-haute température (unités cristallines de Svratka et du Moldanubien), chevauchent une unité intermédiaire affectée par un métamorphisme de moyenne à basse pression-moyenne température (l'orthogneiss de Bíte et son encaissant). A la base de cette pile édifiée durant la tectonique D1, l'unité des phyllites internes (unité de Bílý potok) est caractérisée par un métamorphisme de basse témperature-basse pression.Le second stade D2 de l'évolution tectonique est caractérisé par une tectonique pelliculaire à vergence nord datée à 320-310 Ma. L'empilement résultant de D1 est ainsi transporté vers le nord, au dessus du complexe autochtone d'âge protérozoïque supérieur (groupe de Deblín) et sa couverture sédimentaire dévonienne très faiblement métamorphisée.Le massif granitique de Brno (580 Ma) n'est que marginalement incorporé à cette tectonique de nappe varisque. Ceci se traduit par des duplex socle-couverture d'échelle plurikilométrique. L'évolution tectonique s'achève lors d'une troisième phase, marquée par de grands plis à vergence est. Le déplacement associé est alors d'amplitude limitée.

---

, . , 350-340 . . , , - ( ), , - ( ). , D 1, (- ) - . D 2 , 320-310 ., D 1, , , ( ) . (580 . ) , »« -, . , .

     

Dynamics of Saxothuringian subduction channel/wedge constrained by phase‐equilibria modelling and micro‐fabric analysis

Subduction and exhumation dynamics can be investigated through analysis of metamorphic and deformational evolution of associated high‐grade rocks. The Erzgebirge anticline, which forms at the boundary between the Saxothuringian and Teplá‐Barrandian domains of the Bohemian Massif, provides a useful study area for these processes owing to the occurrence of numerous meta‐basites preserving eclogite facies assemblages, and coesite and diamond bearing quartzofeldspathic lithologies indicating subduction to deep mantle depths. The prograde and retrograde evolution of meta‐basite from the Czech portion of the Erzgebirge anticline has been constrained through a combination of thermodynamic modelling and conventional thermobarometry. Garnet growth zoning indicates that the rocks underwent burial and heating to peak conditions of 2.6 GPa and at least 615 °C. Initial exhumation occurred with concurrent cooling and decompression resulting in the growth of amphibole and zoisite poikiloblasts overgrowing and including the eclogite facies assemblage. The development of clinopyroxene–plagioclase–amphibole symplectites after omphacite and Al‐rich rims on matrix amphibole indicate later heating at the base of the lower crust. Omphacite microstructures, in particular grain size analysis and lattice‐preferred orientations, indicate that the prograde evolution was characterized by a constrictional strain geometry transitioning into plane strain and oblate fabrics during exhumation. The initial constrictional strain pattern is interpreted as being controlled by competing slab pull and crustal buoyancy forces leading to necking of the subducting slab. The transition to plane strain and flattening geometries represents transfer of material from the subducting lithosphere into a subduction channel, break‐off of the dense slab and rebound of the buoyant crustal material.     

P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.     

Hercynian-thrust related shear zones and deformation of the Varied Group on the contact of granulites/Southern Moldanubian,Bohemian Massif/

The three deformation phases inferred from the detailed structural analysis of the Cesky Krumlov Varied Group record the Hercynian development of the Southern Moldanubian of the Bohemian Massif. The deformation is related to the NW-SE thrusting of the large crustal units including granulites. The formation of the NS and NW-SE trending shear zones is connected with the thrust movement. The structural development begins with F₁ isoclinal fold formation, that could originate in unmetamorphosed sediments. In the final stage, they were strongly flattened and B₁ boudinage developed in the rocks. Aplite dykes and migmatitization of paragneisses occurred at the same time the rocks were metamorphosed. The D₂ deformational phase was produced by the simple shear deformation of the unit and folds of various styles around rigid inclusions and the strike-slip shear zone near the boundary of the granulite and the Varied Group were formed. The F₁ and F₂ folds are parallel with the stretching and mineral lineation indicating a NS to NW-SE direction of the thrusting. The youngest deformation is characterized by spectacular boudinage and by folding of the vertically oriented planes.

---

Zusammenfassung Drei Deformationsphasen der variszischen tektonischen Entwicklung sind in der Bunten Gruppe des südlichen Moldanubikums des Böhmischen Massivs enthalten. Die Deformation ist mit der von NW nach SE orientierten überschiebung von gro\en Krusteneinheiten mit Granuliten verbunden. Die Entstehung von jüngeren N-S und NW-SE verlaufenden Scherzonen kann auf die überschiebungsbewegung bezogen werden. Die Strukturentwicklung beginnt mit F₁ isoklinalen Falten, die wahrscheinlich den nichtmetamorphisierten Sedimenten aufgeprägt wurden. Während der Abschlu\phase der Formung wurden sie stark geplättet und es entstand die B₁ Boudinage. Die Aplitgänge, Migmatitisation der Paragneisse und Metamorphose der Gesteine sind gleichzeitig. Die D₂ Deformationsphase wurde durch einfache Scherung der Einheit hervorgerufen und es entstanden Falten verschiedenen tektonischen Stils in der Umgebung starrer Einschlüsse und die Blattverschiebung an der Grenze von Granulit und Bunter Gruppe. Die F₁ und F₂ Falten liegen parallel zur Streckungslmeation und überschiebungsrichtung ab. Die jüngste Deformation ist charakterisiert durch eine spektakuläre Boudinage und Faltung der senkrecht stehenden Flächen.

---

Résumé L'étude structurale détaillée de la Série Variée du Moldanubien méridional dans le Massif de Bohème a permis de distinguer trois phases de déformation dans le développement tectonique varisque. Cette déformation est liée au charriage, du Nord-Ouest vers le Sud-Est, de grandes unités crustales comportant des granulites. La genèse de zones de cisaillement plus jeunes, d'orientation N-S et NW-SE peut Être liée au mÊme processus de charriage. Le développement structural commence avec des plis isoclinaux F₁ engendrés vraisemblablement dans les sédiments non métamorphisés. Au stade final de leur formation, ils ont été très aplatis et un boudinage B₁ est apparu. L'intrusion de filons d'aplite et la migmatitisation des paragneisses sont contemporaines du métamorphisme. La deuxième déformation D₂ a été le fait d'un cisaillement simple; à ce moment se sont formés des plis de style tectonique très variés, localisés fréquemment autour d'inclusions rigides. De cette étape date également le décrochement ductile entre les granulites et la Série Variée. Les plis F₁ et F₂ sont parallèles à la linéation d'étirement (linéation minérale) qui indique la direction N-S à NW-SE du charriage. La déformation la plus jeune comporte un boudinage spectaculaire et le plissement des plans d'attitude verticale.

---

- , : , . , ( ) ( ). - 502±10 , 0,71174±73. , . 471±9 0,70684±25, , , . - 56±1 . 120–230 , . 37±1 , , . 10,4 14,6, 8,9 11,8. , , , , — .

     

The Variscan tectonic inheritance of the Upper Rhine Graben: evidence of reactivations in the Lias,Late Eocene–Oligocene up to the recent

Processing of gravity and magnetic maps shows that the basement of the Upper Rhine Graben area is characterized by a series of NE–SW trending discontinuities and elongated structures, identified in outcrops in the Vosges, Black Forest, and the Odenwald Mountains. They form a 40 km wide, N30–40° striking, sinistral wrench-zone that, in the Visean, shifted the Variscan and pre-Variscan structures by at least 43 km to the NE. Wrenching was associated with emplacement of several generations of plutonic bodies emplaced in the time range 340–325 Ma. The sub-vertical, NE–SW trending discontinuities in the basement acted as zones of weakness, susceptible to reactivation by subsequent tectonism. The first reactivation, marked by mineralizations and palaeomagnetic overprinting along NE–SW faults of the Vosges Mountains, results from the Liassic NW–SE extension contemporaneous with the break-up of Pangea. The major reactivation occurred during the Late Eocene N–S compression and the Early-Middle Oligocene E–W extension. The NE–SW striking basement discontinuities were successively reactivated as sinistral strike-slip faults, and as oblique normal faults. Elongated depocenters appear to form in association with reactivated Variscan wrench faults. Some of the recent earthquakes are located on NE–SW striking Variscan fault zones, and show sinistral strike-slip focal mechanisms with the same direction, suggesting also present reactivation.     

Growth, annealing and recrystallization of zircon and preservation of monazite in high-grade metamorphism: conventional and in-situ U-Pb isotope, cathodoluminescence and microchemical evidence

Zircon and monazite from granulite- to amphibolite-facies rocks of the Vosges mountains (central Variscan Belt, eastern France) were dated by ion-microprobe and conventional U-Pb techniques. Different granulites of igneous (so-called leptynites) and sedimentary origin (kinzigites) and their leucosomes were dated at 334.9 ± 3.6, 335.4 ± 3.6 and 336.7 ± 3.5 Ma (conventional age 335.4 ± 0.6 Ma). Subsequent growth stages of zircon were distinguished by secondary electron (SEM) and cathodoluminescence (CL) imaging: (1) subsolidus growth producing round anhedral morphologies and sector zoning; (2) appearance of an intergranular fluid or melt phase at incipient dehydration melting that first resulted in resorption of pre-existing zircons, followed by growth of acicular zircons or overgrowths on round zircons consisting of planar growth zoning; (3) advanced melting producing euhedral prismatic zircons with oscillatory zoning overgrowing the sector zones. Two further lithologies, the Kaysersberg granite and the Trois-Epis units, were both formerly considered as migmatites. The intrusion of the Kaysersberg granite was dated at 325.8 ± 4.8 Ma. The Trois-Epis unit was found to be the product of volume recrystallization of a former granulite, which occurred under amphibolite-facies conditions 327.9 ± 4.4 Ma ago. The amphibolite-facies overprint of the Trois-Epis zircons led to the complete rejuvenation of most of the zircon domains by annealing and replacement/recrystallization processes. Annealing is assumed to occur in strained lattice domains, which are possibly disturbed by high trace element contents and/or large differences in decay damage between adjacent growth zones. Investigation of cathodoluminescence structures reveals that the replacement occurs along curved chemical reaction fronts that proceed from the surface towards the interior of the zircon. The monazite U-Pb system still records the age of high-grade metamorphism at around 335 Ma. The chemical reagent responsible for the rejuvenation of zircon obviously left the monazite unaffected. Received: 19 February 1998 / Accepted: 19 October 1998     

Late orogenic extension in the Bohemian Massif: petrostructural evidence in the Hlinsko region

Abstract

The tectonic contact between low-grade metase-dimentary series and high-grade rocks in the Hlinsko region (Bohemian Massif) is commonly interpreted as a thrust of the Barrandian sediments over the upper Moldanubian nappe.

The sediments occur in an E-facing synform that contains a tonalitic laccolith on its eastern boundary with the Moldanubian, and is truncated by a granodiorite pluton to the west. The synform represents a late deformational folding event related to the granodiorite intrusion. NW-oriented normal shear in the tonalite is indicated by S-C microstructures. Kinematic criteria associated with the major foliation and lineation development in the metasediments also indicate a north-westward, normal shear. In addition, Moldanubian gneiss display late shear bands due to north-westward, normal shear. Consequently, the presumed thrust is a low-angle, normal shear zone.

Low-pressure type metamorphism (3 < P < 4 x 10² MPa) coeval with the major deformational phase in pelites of the Hlinsko synform is attributed to both the tonalite aureole and the extensive HT metamorphism (under P > 6 x 10² MPa) that has affected the underlying Moldanubian.

The possibly polyphase normal fault is consistent with the meta-morphic pressure jump between the metasediments and the Moldanubian.

We suggest that the tonalite intruded syntectonically within the normal ductile shear zone active during waning stages of the Variscan orogeny.     

From orthogneiss to migmatite: Geochemical assessment of the melt infiltration model in the Gföhl Unit (Moldanubian Zone, Bohemian Massif)

The Gföhl Unit is the largest migmatite terrain of the Variscan orogenic root domain in Europe. Its genesis has been until now attributed to variable degrees of in situ partial melting. In the Rokytná Complex (Gföhl Unit, Czech Republic) there is a well-preserved sequence documenting the entire migmatitization process on both outcrop and regional scales. The sequence starts with (i) banded orthogneiss with distinctly separated monomineralic layers, continuing through (ii) migmatitic mylonitic gneiss, (iii) schlieren migmatite characterised by disappearance of monomineralic layering and finally to (iv) felsic nebulitic migmatite with no relics of the original banding.

While each type of migmatite shows a distinct whole-rock geochemical and Sr–Nd isotopic fingerprint, the whole sequence evolves along regular, more or less smooth trends for most of the elements. Possible mechanisms which could account for such a variation are that the individual migmatite types (i) are genetically unrelated, (ii) originated by equilibrium melting of a single protolith, (iii) formed by disequilibrium melting (with or without a small-scale melt movement) or (iv) were generated by melt infiltration from external source. The first scenario is not in agreement with the field observations and chemistry of the orthogneisses/migmatites. Neither of the remaining hypotheses can be ruled out convincingly solely on whole-rock geochemical grounds. However in light of previously obtained structural, petrologic and microstructural data, this sequence can be interpreted as a result of a process in which the banded orthogneiss was pervasively, along grain boundaries, penetrated by felsic melt derived from an external source.

In terms of this melt infiltration model the individual migmatites can be explained by different degrees of equilibration between the bulk rock and the passing melt. The melt infiltration can be modelled as an open-system process, characterised by changes of the total mass/volume and accompanied by gains/losses in many of the major- and trace elements. The modelling of the mass balance resulted in identification of a component added by a heterogeneous nucleation of feldspars, quartz and apatite from the passing melt. This is in line with the observed presence of new albitic plagioclase, K-feldspar and quartz coatings as well as resorption of relict feldspars. At the most advanced stages (schlieren and nebulitic migmatites) the whole-rock trace-element geochemical variations document an increasing role for fractional crystallization of the K-feldspar and minor plagioclase, with accessory amounts of monazite, zircon and apatite.

The penetrating melt was probably (leuco-) granitic, poor in mafic components, Rb rich, with low Sr, Ba, LREE, Zr, U and Th contents. It probably originated by partial melting of micaceous quartzo-feldspathic rocks.

If true and the studied migmatites indeed originated by a progressive melt infiltration into a single protolith resembling the banded orthogneiss, this until now underappreciated process would have profound implications regarding rheology and chemical development of anatectic regions in collisional orogens.     

Metamorphic inheritance of Rheic passive margin evolution and its early‐Variscan overprint in the Teplá‐Barrandian Unit,Bohemian Massif

Rift‐related regional metamorphism of passive margins is usually difficult to observe on the surface, mainly due to its strong metamorphic overprint during the subsequent orogenic processes that cause its exposure. However, recognition of such a pre‐orogenic evolution is achievable by careful characterization of the polyphase tectono‐metamorphic record of the orogenic upper plate. A multidisciplinary approach, involving metamorphic petrology, P–T modelling, structural geology and in situ U‐Pb monazite geochronology using laser‐ablation split‐stream inductively coupled plasma mass spectrometry, was applied to unravel the polyphase tectono‐metamorphic record of metapelites at the western margin of the Teplá‐Barrandian domain in the Bohemian Massif. The study resulted in discovery of three tectono‐metamorphic events. The oldest event M1 is LP–HT regional metamorphism with a geothermal gradient between 30 and 50 °C km^?1, peak temperatures up to 650 °C and of Cambro‐Ordovician age (c. 485 Ma). The M1 event was followed by M2‐D2, which is characterized by a Barrovian sequence of minerals from biotite to kyanite and a geothermal gradient of 20–25 °C km^?1. D2‐M2 is associated with a vertical fabric S2 and was dated as Devonian (c. 375 Ma). Finally, the vertical fabric S2 was overprinted by a D3‐M3 event that formed sillimanite to chlorite bearing gently inclined fabric S3 also of Devonian age. The high geothermal gradient of the M1 event can be explained as the result of an extensional, rift‐related tectonic setting. In addition, restoration of the deep architecture and polarity of the extended domain before the Devonian history – together with the supracrustal sedimentary and magmatic record – lead us to propose a model for formation of an Ordovician passive continental margin. The subsequent Devonian evolution is interpreted as horizontal shortening of the passive margin at the beginning of Variscan convergence, followed by detachment‐accommodated exhumation of lower‐crustal rocks. Both Devonian shortening and detachment occurred in the upper plate of a Devonian subduction zone. The tectonic evolution presented in this article modifies previous models of the tectonic history of the western margin of the Teplá‐Barrandian domain, and also put constraints on the evolution of the southern margin of the Rheic ocean from the passive margin formation to the early phases of Variscan orogeny.     

Tectonometamorphic evolution of an intracontinental orogeny inferred from P–T–t–d paths of the metapelites from the Rehamna massif (Morocco)

New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome‐like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The ²⁰⁶Pb/²³⁸U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re‐heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma‐rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.