Magma Ascent and Crustal Accretion at Ultraslow-Spreading Ridges: Constraints from Plagioclase Ultraphyric Basalts from the Arctic Mid-Ocean Ridge

Plagioclase ultraphyric basalts (PUBs) with up to 54% plagioclasephenocrysts were dredged in the rift valley and adjacent flanksof the ultraslow-spreading Mohns and Knipovich ridges. The PUBsshow large variations in crystal morphologies and zoning. Thelarge variations suggest that single basalt samples containa mixture of plagioclase crystals that aggregated at differentlevels in the magma conduits. Resorbed crystals and repeatedreverse zones suggest that the magma reservoirs were replenishedand heated several times. Thin concentric zones with melt inclusions,and sharp reductions in the anorthite content of 3–7%,are common between the reverse zones. These zones, and skeletalcrystals with distinctly lower anorthite contents than massivecrystals, are interpreted to be the result of rapid crystalliztionduring strong undercooling. The changes between short periodsof cooling and longer periods with reheating are explained bymultiple advances of crystal-rich magma into cool regions followedby longer periods of gradual magma inflow and temperature increase.The porphyritic basalts are characterizd by more depleted andmore fractionated compositions than the aphyric basalts, withlower (La/Sm)_N, K₂O and Mg-numbers. This relationship, and theobservation that PUBs are sampled only close to segment centresalong these ridges, suggests that the PUBs formed by higherdegrees of melting and evolved in more long-lived magma reservoirs.We propose that the zoning patterns of plagioclase crystalsand crystal morphologies of these PUBs reflect the developmentand flow of magma through a stacked sill complex-like conduitsystem, whereas the aphyric equivalents represent later flowof magma through the conduit. The formation of voluminous higher-degreemelts may trigger the development of the magma conduits andexplain the generally depleted compositions of PUB magmas. KEY WORDS: basalt; mineral chemistry; MORB; magma mixing; magma chamber; major element     

Competition within the marine microalgae over the polar dark period in the Greenland Sea of high Arctic

Abstract-With the onset of winter, polar marine microalgae would have faced total darkness for aperiod of up to 6 months. A natural autumn community of Arctic sea ice microalgae was collected fordark survival experiments from the Greenland Sea during the ARKTIS-XI/2 Expedition of RV Po-larstern in October 1995. After a dark period of 161 days, species dominance in the algal assemblagehave changed from initially pennate diatoms to small phytoflagellates (<20μm). Over the entire darkperiod, the mean algal growth rate was-0.01 d~(-1). Nearly all diatom species had negative growthrates, while phytoflagellate abundance increased. Resting spore formation during the dark period was ob-served in less than 4.5% of all cells and only for dinoflagellates and the diatom Chaetoceros spp. We as-sume that facultative heterotrophy and energy storage are the main processes enabling survival during thedark Arctic winter. After an increase in light intensity, microalgal cells reacted with fast growth withindays. Phytoffa     

Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

低围压水平下砂的排水行为(英文)

采用干样沉降法制备样品 ,选用静三轴仪对松砂和密砂样在 10 k Pa至 10 0 k Pa的低围压下的排水行为进行了实验研究 ,并对实验结果作了橡皮膜校正 ,在围压为 10 k Pa的密砂实验中 ,轴向应力的校正值可达到 12 %。实验研究表明低围压下松砂的剪胀性非常明显 ,且存在剪应力极值 ;围压越低 ,松砂和密砂的剪应力极值越小 ,达到最大剪应力所对应的剪应变越小。同时还表明低围压范围内相对密度不同 ,砂的应力应变特性不同 ;此外 ,低围压下砂的内摩擦角高于高围压下的值 ,从而在工程上应重视低围压水平下砂土工程参数的合理选取     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

Modelling of the internal mechanics in ship collisions

A method for analysis of the structural damage due to ship collisions is developed. The method is based on the idealized structural unit method (ISUM). Longitudinal/transverse webs which connect the outer and the inner hulls are modelled by rectangular plate units. The responses are determined by taking into account yielding, crushing, and rupture. Some plates of the outer and the inner shell subjected to large membrane tensions are modelled by membrane tension triangular/rectangular plate units, while the remaining shell panels are modelled by the usual plate units. The effect of stiffeners on the stiffness and the strength is considered as well. In order to include the coupling effects between local and global failure of the structure, the usual non-linear finite-element technique is applied. In order to deal with the gap and contact conditions between the striking and the struck ships, gap/contact elements are employed. Dynamic effects are considered by inclusion of the influence of strain-rate sensitivity in the material model. On the basis of the theory a computer program has been written. The procedure is verified by a comparison of experimental results obtained from test models of double-skin plated structures in collision/grounding situations with the present solutions. As an illustrative example the procedure has been used for analyses of a side collision of a double-hull tanker. Several factors affecting ship collision response, namely the collision speed and the scantlings/ arrangements of strength members, are discussed.     

Spatial and temporal distribution patterns of deep‐sea mesozooplankton in the eastern Mediterranean – indications of a climatically induced shift?

Zooplankton samples from the eastern Mediterranean were collected in April/May 1999 with a multiple opening and closing net (mesh size 333 μm) to examine the distribution and taxonomic composition of mesozooplankton, mainly Calanoida (Copepoda), some years after the onset of the Eastern Mediterranean Transient (EMT), a climatically induced shift in hydrography. The samples from seven stations on a transect from the Ionian Sea to the eastern part of the Levantine Basin were collected at closely spaced vertical intervals from the surface to water depths of 4250 m. Data from January 1987, June 1993, January 1998 and October 2001 from the main site of investigation, south of Crete, were used to describe the temporal evolution before (1987), during (1993) and after (1998–2001) the EMT. The eastern Mediterranean mesozooplankton fauna is dominated by three Calanoida species along the west–east transect, with varying abundances in different depth‐zones: Haloptilus longicornis in the epipelagic zone, Eucalanus monachus in the mesopelagic zone, and Lucicutia longiserrata in the bathypelagic zone. A drastic change in mesozooplankton composition and abundance occurred at the main site during the EMT, whereupon increased abundances of Candacia elongata and L. longiserrata were observed in the bathypelagic zone in the following years; L. longiserrata accounted for 43% of the total mesozooplankton in this zone. The hypothesis is posed that the Mediterranean deep‐sea ecosystem is able to respond quickly to changes in the environment and memorizes these changes over time. We claim that the biological effects of climatically induced changes can be easily monitored in the deep eastern Mediterranean Sea using calanoid copepod key species due to the hydrographically extreme, but ‘simply structured’ ecosystem.