Microfabrics of calcite ultramylonites as records of coaxial and non-coaxial deformation kinematics: Examples from the Rocher de l'Yret shear zone (Western Alps)

Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.     

Fiscal geographies: “Placing” taxation in urban geography

As the state’s primary means of both redistributing wealth and incentivizing private investment, tax plays an outsized role in a range of critical urban processes, including (re)development, gentrification, financialization, and local and regional governance. We argue, through reference to existing literature in urban and economic geography, as well as our own research on taxation and the state, that urban scholarship could benefit by close and careful engagement with taxation and the tax system. We term this new vein of research “fiscal geographies” and see it as offering potential for more nuanced study of urban political economy, politics, and processes.     

Significance of post‐peak metamorphic reaction microstructures in the ultrahigh temperature Eastern Ghats Province,India

Ultrahigh temperature (UHT) granulites in the Eastern Ghats Province (EGP) have a complex P–T–t history. We review the P–T histories of UHT metamorphism in the EGP and use that as a framework for investigating the P–T–t history of Mg–Al‐rich granulites from Anakapalle, with the express purpose of trying to reconcile the down‐pressure‐dominated P–T path with other UHT localities in the EGP. Mafic granulite that is host to Mg–Al‐rich metasedimentary granulites at Anakapalle has a protolith age of c. 1,580 Ma. Mg–Al‐rich metasedimentary granulites within the mafic granulite at Anakapalle were metamorphosed at UHT conditions during tectonism at 960–875 Ma, meaning that the UHT metamorphism was not the result of contact metamorphism from emplacement of the host mafic rock. Reworking occurred during the Pan‐African (c. 600–500 Ma) event, and is interpreted to have produced hydrous assemblages that overprint the post‐peak high‐T retrograde assemblages. In contrast to rocks elsewhere in the EGP that developed post‐peak cordierite, the metasedimentary granulites at Anakapalle developed post‐peak, generation ‘2’ reaction products that are cordierite‐absent and nominally anhydrous. Therefore, rocks at Anakapalle offer the unique opportunity to quantify the pressure drop that occurred during so‐called M2 that affected the EGP. We argue that M2 is either a continuation of M1 and that the overall P–T path shape is a complex counter‐clockwise loop, or that M1 is an up‐temperature counter‐clockwise deviation superimposed on the M2 path. Therefore, rather than the rocks at Anakapalle having a metamorphic history that is apparently anomalous from the rest of the EGP, we interpret that other previously studied localities in the EGP record a different part of the same P–T path history as Anakapalle, but do not preserve a significant record of pressure decrease. This is due either to the inability of refractory rocks to extensively react to produce a rich mineralogical record of pressure decrease, or because the earlier high‐P part of the rocks history was erased by the M1 loop. Irrespective of the specific scenario, models for the tectonic evolution of the EGP must take the substantial pressure decrease during M2 into account, as it is probable the P–T record at Anakapalle is a reflection of tectonics affecting the entire province.     

Use of GIS mapping and modeling approaches to examine the spatial distribution of seagrasses in Barnegat Bay, New Jersey

Due to the ecological importance of seagrasses and recent indications of disease and dieback, we have synthesized existing mapped survey information concerning the spatial and temporal distribution of seagrass beds (primarily eelgrass,Zostera marina) in Barnegat Bay, New Jersey. Mapped surveys from the 1960s, 1970s, 1980s, and 1990s were digitized and compiled in a geographic information system to facilitate analysis. Comparison of the earlier maps with the 1990s survey shows an overall decrease of approximately 2,000 to 3,000 ha in the area of seagrass beds. While there are indications of seagrass decline, due to the great difference in mapping methods used for each of the surveys, we are cautious in directly attributing the decrease in mapped eelgrass acreage to a large-scale dieback. We examined the extent to which light could be used to predict the distribution of seagrass in Barnegat Bay. Data on Secchi depth throughout the bay were combined with a modification of an existing model (Duarte 1991) of the relationship betweenZ. marina compensation depths and light attenuation coefficients to predict the distribution of seagrasses in Barnegat Bay. When compared with mapped seagrass distribution in the bay, the model correctly predicts seagrass presence-absence over two-thirds of the time. The majority of the model error is due to errors of commission, i.e., the model predicts seagrass occurrence where it was not observed to occur. Most of this commission error is located in specific geographic areas (i.e., southern third of Little Egg Harbor and the western shoreline of the bay).     

The challenges of integrating explainable artificial intelligence into GeoAI

Although explainable artificial intelligence (XAI) promises considerable progress in glassboxing deep learning models, there are challenges in applying XAI to geospatial artificial intelligence (GeoAI), specifically geospatial deep neural networks (DNNs). We summarize these as three major challenges, related generally to XAI computation, to GeoAI and geographic data handling, and to geosocial issues. XAI computation includes the difficulty of selecting reference data/models and the shortcomings of attributing explanatory power to gradients, as well as the difficulty in accommodating geographic scale, geovisualization, and underlying geographic data structures. Geosocial challenges encompass the limitations of knowledge scope—semantics and ontologies—in the explanation of GeoAI as well as the lack of integrating non-technical aspects in XAI, including processes that are not amenable to XAI. We illustrate these issues with a land use classification case study.     

Bacterial and Virus‐Like Particle Abundances in Purged and Unpurged Groundwater Depth Profiles

Bacteria and viruses are ubiquitous in subterranean aquatic habitats. Bacterial abundance is known to vary with depth in aquifers; however, whether viral abundance varies with depth is less well known. Here we use flow cytometry (FCM) to enumerate bacteria and virus‐like particles (VLP) from groundwater depth profiles. Groundwater samples were obtained from a set of nested piezometers from depths of 15, 30, 45, 60, 80, and 90 m and bacteria and VLP abundances were determined in purged aquifer water and unpurged water at each slot depth. Mean bacterial abundance (cells / mL) was not significantly different in unpurged water (3.2 × 10⁵) compared to purged water (1.4 × 10⁵); however, mean VLP abundance (particles / mL) was significantly greater in unpurged water (4.4 × 10⁵) compared to purged water (2.3 × 10⁵). Purged water was used to investigate the aquifer depth profile and bacterial and VLP abundances were observed to vary significantly between depths. The virus‐bacteria ratio was determined and was observed to steadily increase with depth. Overall, our data indicate the dynamic nature of bacterial and viral abundances in subsurface environments which should be considered when designing groundwater microbial sampling methodologies.     

Spatial Patterns in Water Quality Associated with Submersed Plant Beds

This study describes the influence of submersed plant beds on spatial distributions of key water quality variables. An on-board flow-through water sampling system was used to investigate patterns in turbidity, chlorophyll-a, temperature, dissolved oxygen, and pH across a robust stand of the submersed plant Stuckenia pectinata. Spatially interpolated maps show that water quality conditions were significantly altered within this plant bed, especially during months of peak biomass, and that reduction of suspended particles focused at the bed’s edge. Comparison with a suite of submersed plant beds indicated that patterns were related to canopy height, shoot density, and cross-shore bed width. Wide and dense stands with tall canopies showed reduced turbidity and increased light penetration, while smaller sparser beds often showed elevated within-bed turbidity. These results suggest that bed effects on water quality conditions vary seasonally with plant canopy architecture and bed size, providing tentative guidelines for restoring self-sustaining beds.