Sur les anomalies structurales de l'anticlinal de l'oued Bahloul de Tunisie : héritage tectonique et plissement cisaillant de couverture

The Oued Bahloul structure exists in the central Atlas of Tunisia. This structure is oriented N70 and it shows a very particular geometry characterized by: (i) an important disharmony between the northern and the southern flanks; (ii) a dissymmetry between the east and the west parts of the structure; (iii) several gaps and progressive unconformities present in the Cretaceous and Eocene series.Three major tectonic directions characterize this structure: (i) the N120 appears in the western part of the anticline; (ii) some north–south faults distinguish the oriental part; (iii) the strike fault, which is confirmed by seismic data, affects the central part of this anticline. To cite this article: A. Saadi et al., C. R. Geoscience 338 (2006).     

Les manifestations tectoniques synsédimentaires associées à la compression éocène en Tunisie : implications paléogéographiques et structurales sur la marge Nord-Africaine

In central Tunisia, a synsedimentary tectonic episode has been pointed out through the tectonic movements affecting the Late Palaeocene–Early Eocene successions. This tectonic episode has controlled, to a large extent, the palaeogeographic setting of the area during that period and confirmed the important effect induced by the Pyrenean shortening phase on the edge of the African plate, which obviously has witnessed a common history with the southern part of the European plate. To cite this article: A. El Ghali et al., C. R. Geoscience 335 (2003).     

Use of genetic algorithm in new approach to modeling of flood routing

Journal of Oceanology and Limnology - The hydrological models and simplified methods of Saint-venant equations are used extensively in hydrological modeling, in particular for the simulation of the...     

Patterns of genetic and morphometric diversity in the marbled crab (Pachygrapsus marmoratus, Brachyura, Grapsidae) populations across the Tunisian coast

The present study reports on population structure analysis of the marbled crabPachygrapsus marmoratus (Fabricius, 1787) from the Tunisian coast, an appropriate location to study biogeographical process...     

Multivariate Statistical Analysis and Geochemical Modeling to Characterize the Surface Water of Oued Chemora Basin,Algeria

Multivariate statistical methods and inverse geochemical modeling were jointly used to deduce the genetic origin of chemical parameters of surface water in the Oued Chemora Basin. The analysis of variance indicates that variations of all parameters at the three stations are significant except for pH and T (p > 0.05). R-mode cluster analysis reveals two distinct groups at each station and led to the conclusion that the major ion chemistry in the three stations is derived from organic and artificial fertilizers due to agricultural activities in the area and water–rock interaction. Mineral saturation indices, calculated from major ions, indicate that the surface water is generally super-saturated with carbonate phases, and all the water samples are under-saturated with respect to gypsum, halite, and CO_2(g). In a broad sense, the reactions responsible for the hydrochemical evolution in the Basin fall into three categories: (1) dissolution of evaporite minerals; (2) precipitation of carbonate minerals; and (3) ion exchange.     

Laboratory Study on the Hydraulic Conductivity and Pore Pressure of Sand-Silt Mixtures

The hydraulic conductivity plays a major role on the excess pore pressure generation during monotonic and cyclic loading of granular soils with fines. This paper aims to determine how much the hydraulic conductivity and pore pressure response of the sand-silt mixtures are affected by the percentage of fines and void ratio of the soil. The results of flexible wall permeameter and undrained monotonic triaxial tests performed on samples reconstituted from Chlef River sand with 0, 10, 20, 30, 40, and 50% nonplastic silt at an effective confining stress of 100 kPa and two relative densities (D_r = 20, and 91%) are presented and discussed. It was found that the pore pressure increases linearly with the increase of the fines content and logarithmically with the increase of the intergranular void ratio. The results obtained from this study reveal that the saturated hydraulic conductivity (k) of the sand mixed with 50% low plastic fines can be, on average, four orders of magnitude smaller than that of the clean sand. The results show also that the hydraulic conductivity decreases hyperbolically with the increase of the fines content and the intergranular void ratio.     

Laboratory Investigation on the Effects of Overconsolidation and Saturation on Undrained Monotonic Shear Behavior of Granular Material

In order to study pore water response and static liquefaction characteristics of silty sand, which has previously experienced liquefaction, two series of monotonic triaxial tests were run on medium dense sand specimens (RD = 50%) at confining pressure of 100 kPa. In the first test series, the influence of the soil saturation under undrained static loading has been studied. It summarizes results of monotonic tests performed on Chlef sand at various values of the Skempton's pore pressure coefficient. Analysis of experimental results gives valuable insights on the effect of soil saturation on sand response to undrained monotonic paths. In the second series of tests, the overconsolidation influence on the resistance to the sands liquefaction has been realized on samples at various values of overconsolidation ratios (OCR). It was found that the increase of overconsolidation ratio (OCR) increases the resistance of sands to liquefaction.     

Experimental Study of Undrained Shear Strength of Silty Sand: Effect of Fines and Gradation

Two strong earthquakes occurred in the region of Chlef (north western part of Algeria) during the last century. From the geological context, there were several great masses of sandy soil ejections on to the ground surface level and severe damages to civil and hydraulic structures. These damages were due to the soil liquefaction phenomenon. The objective of this laboratory investigation is to study the effect of low plastic fines and gradation characteristics on the undrained shear strength (liquefaction resistance) response of sand-silt mixture samples. For this purpose, a series of undrained monotonic triaxial tests were carried out on reconstituted saturated silty sand samples with different fines content ranging from 0 to 50?% at two initial relative densities (D_r?=?20 and 91?%). The initial confining pressure was kept at 100?kPa. The evaluation of the data indicates that the undrained shear strength at the peak (q_peak) can be correlated to the undrained residual strength (S_us), the excess pore pressure (Δu), the fines content (F_c) and the intergranular void ratio (e_s). The test results indicate also that the undrained shear strength at the peak decreases with the increment of the coefficient of uniformity and fines content as well as with the decrement of the mean grain size in the range of 0–50?% fines content for both relative densities (D_r?=?20 and 91?%).     

A laboratory study of the initial structure and the overconsolidation effects on the undrained monotonic behavior of sandy soil from Chlef region in northern Algeria

The effects of initial state of the samples and the overconsolidation ratio (OCR) on the behavior of Chlef sand were studied in this article. For this purpose, the results of two series of undrained monotonic triaxial compression tests on medium dense sand are presented. In the first test series, the influence of the specimen's fabric and confining pressure has been studied. The tests were conducted at initial confining pressure of 50, 100, and 200 kPa. Two methods of sample preparation, which included the dry funnel pluviation and the wet deposition, were utilized. All the samples were subjected to a monotonic loading after consolidation phase. The results of the tests demonstrate that an increase in initial confining pressure leads to an increase in the resistance to liquefaction. The results also show that the samples prepared with the dry funnel pluviation method exhibit a greater resistance to liquefaction than those prepared with the wet deposition method. In the second series of tests, the overconsolidation influence on the resistance to the sand liquefaction has been realized on samples at an effective stress of 100 kPa for OCR varying between 1 and 8. The tests show that the increase of OCR improves the stiffness of sand and accelerates the appearance of dilatancy.