Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Landslide susceptibility assessment along the southern coast of the Caspian Sea,Iran

China is a disaster-prone country, and these disasters have diverse characteristics, a wide scope of distribution, high frequency, and large losses. China has advanced community-based disaster management (CBDM) capacity. Community is the bottom unit of the society, and CBDM is the foundation of the entire society’s disaster management system. A series of domestic major emergency incidents and disasters and international disaster reduction activities have promoted the formation of the CBDM concept, the implementation of capacity building activities, and the improvement of policy and laws. Thus far, the CBDM system has been preliminarily formed in China, and relevant rules and regulations have been promulgated and implemented. Furthermore, disaster reduction activities, such as the construction of the national comprehensive disaster reduction community and national safe community, have been promoted nationwide. As a result, China’s disaster-resistance capacity has largely improved. However, it is only in the initial phase of CBDM implementation, which remains plagued by several challenges and problems, such as the deficiency of community resident participation, management organizations, disaster risk assessment methods, NGO development, and safety culture cultivation.     

Investigation of the probable trigger factor for large landslides in north of Dehdasht,Iran

Natural Hazards - Charosa and Dehdasht is a part of folded Zagros that is located in the Kohgiluyeh and Boyer-Ahmad Province in southwestern Iran. This area is covered with several Zagros...     

A correlation between P-wave velocity and Schmidt hardness with mechanical properties of travertine building stones

As known, P-wave velocity and Schmidt hardness are non-destructive tests, which have been used for many years in geological, geotechnical, and civil engineering as an index tests for a quick assessment of rocks mechanical properties due to its rapidity and easiness, and non-destructiveness. The purpose of this study is to investigate the correlation between P-wave velocity and Schmidt hardness with some of mechanical properties of travertine building stones by empirical equations. Moreover, we have compared the accuracy of P-wave velocity and Schmidt hardness to estimate the mechanical properties of rocks. For this purpose, 15 types of travertine have been collected from various quarries of Iran and tested. The tests include the determination of P-wave velocity and Schmidt hardness, and mechanical properties include the unconfined compressive strength, Brazilian tensile strength, and point load strength. Using data analysis, empirical equations have been developed for estimating the mechanical properties from P-wave velocity and Schmidt hardness. To check the validity of the empirical equations, a t test was performed, which confirmed the validity of the proposed empirical equations. Moreover, the results show that P-wave velocity appears to be more reliable than the Schmidt hardness for estimating the mechanical properties. Consequently, we propose empirical equations avoiding from cumbersome and time consuming tests for determining the mechanical properties of rocks.