Glaciomarine sedimentation and palaeo-glacial setting of Maxwell Bay and its tributary embayment, Marian Cove, South Shetland Islands, West Antarctica

High-resolution (3.5 kHz and multi-channel) seismic profiles and piston cores were collected from Maxwell Bay and its tributary embayment, Marian Cove, in the South Shetland Islands, Antarctica, during the Korea Antarctic Research Program (1992/93 and 1995/96) to elucidate the glaciomarine sedimentation processes and recent glacial history of the area. Seismic data from Maxwell Bay reveal a rugged bay margin and flattened basin floor covered with well-stratified hemipelagic muds. On the base-of-slope, acoustically transparent debris flows occur, indicating downslope resedimentation of glaciomarine sediments. Despite the subpolar and ice-proximal settings of Marian Cove, the seafloor is highly rugged with a thin sediment drape, suggesting that much of the area has been recently eroded by glaciers. Sediment cores from the cove penetrated three distinct fining-upward lithofacies: (1) basal till in the lower part of the core, accumulated just seaward of the grounding line of the tidewater glacier; (2) interlaminated sand and mud in the middle part, deposited in ice-proximal zone by a combination of episodic subglacial meltwater inflow and iceberg dumping; and (3) pebbly mud in the upper part, deposited in ice-distal zone by both surface meltwater plume and ice-rafting from the glacier front. A reconstruction of the glacial history of these areas since the late glacial maximum shows an ice sheet filling Maxwell Bay in late Wisconsin time and grounding of the tidewater glacier in Marian Cove until about 1300 yr BP.     

Effects of an Artificial Breakwater on the Distributions of Planktonic Microbial Communities

The summer distributions of planktonic microbial communities (heterotrophic and phtosynthetic bacteria, phtosynthetic and heterotrophic nanoflagellates, ciliate plankton, and microphytoplankton) were compared between inner and outer areas of Lake Sihwa, divided by an artificial breakwater, located on the western coast of Korea, in September 2003. The semienclosed, inner area was characterized by hyposaline surface water (<17 psu), and by low concentrations of dissolved oxygen (avg. 0.4 mg L¹) and high concentrations of inorganic nutrients (nitrogenous nutrients >36 μM, phosphate <4 μM) in the bottom layer. Higher densities of heterotrophic bacteria and nanoflagellates also occurred in the inner area than did in the outer area, while microphytoplankton (mainly diatoms) occurred abundantly in the outer area. A tiny tintinnid ciliate, Tintinnopsis nana, bloomed into more than 10⁶ cells L¹ at the surface layer of the inner area, while its abundance was much lower (10³-10⁴ cells L¹) in the outer area of the breakwater. Ciliate abundance was highly correlated with heterotrophic bacteria (r = 0.886, p < 0.001) and heterotrophic flagellates (r = 0.962, p < 0.001), indicating that rich food availability may have led to theT. nana bloom. These results suggest that the breakwater causes the eutrophic environment in artificial lakes with limited flushing of enriched water and develops into abundant bacteria, nanoflagellates, and ciliates.     

Species delimitation in the green algal genus Codium (Bryopsidales) from Korea using DNA barcoding

Codium, one of the largest marine green algal genera, is difficult to delimit species boundary accurately based on morphological identification only. DNA barcoding is a powerful tool for discriminating species of seaweeds. The plastid elongation factor TU(tuf A) is considered as maker to perform DNA barcoding of green algal species than rbc L gene due to universality and rapid evolution rate. We conducted DNA barcoding application to Codium specimens from the Jeju Island, Korea to overcome the limit of morphological identification and to confirm the species diversity. As a result of applying tuf A marker, we newly generated fifty-five tuf A barcodes to resolve eight species. Tuf A marker exhibited 6.1%–21.8% interspecific divergences, wider than the gap of rbc L exon 1,3.5%–11.5%. Molecular analysis of rbc L exon 1 sequences of Codium revealed eight distinct species like tuf A analysis separated in five phylogenetic groups. DNA barcoding of the genus Codium using tuf A marker is more helpful to overcome the limit of morphological identification, and this is more potential to reveal cryptic species and to resolve the relationships among subspecies than rbc L analysis alone. The complement of tuf A barcoding and rbc L analyses including morphology for the genus Codium in the northwestern Pacific will give much more reliable achievement for discovering species diversity and resolving the phylogenetic relationships.     

Galaxy activity in merging binary galaxy clusters

We present the results of a study of galaxy activity in two merging binary clusters (A168 and A1750) using the Sloan Digital Sky Survey (SDSS) data supplemented with the data in the literature. We have investigated the merger histories of A168 and A1750 by combining the results from a two-body dynamical model and X-ray data. In A168, two subclusters appear to have passed each other and to be coming together from the recent maximum separation. In A1750, two major subclusters appear to have started interaction and to be coming together for the first time. We find an enhanced concentration of the galaxies showing star formation (SF) or active galactic nuclei (AGN) activity in the region between two subclusters in A168, which were possibly triggered by the cluster merger. In A1750, we do not find any galaxies with SF/AGN activity in the region between two subclusters, indicating that two major subclusters are in the early stage of merging.     

A Review on Marine N2 Fixation: Mechanism,Evolution of Methodologies,Rates, and Future Concerns

Ocean Science Journal - Investigations on marine N2 fixation have gained momentum since 1960s with eventual establishments of relevant methodologies to identify species involved and quantify the...     

Estimation of non-CO2 GHGs emissions by analyzing burn severity in the Samcheok fire, South Korea

This study was performed to estimate the emission of non-CO 2 greenhouse gases(GHGs) from biomass burning at a large fire area.The extended methodology adopted the IPCC Guidelines(2003) equation for use on data from the Samcheok forest fire gathered using 30 m resolution Landsat TM satellite imagery,digital forest type maps,and growing stock information per hectare by forest type in 1999.Normalized burn ratio(NBR) technique was employed to analyze the area and severity of the Samcheok forest fire that occurred in 2000.The differences between NBR from pre-and post-fire datasets are examined to determine the extent and degree of change detected from burning.The results of burn severity analysis by dNBR of the Samcheok forest fire area revealed that a total of 16,200 ha of forest were burned.The proportion of the area characterized by a ’Low’ burn severity(dNBR below 152) was 35%,with ’Moderate’(dNBR 153-190) and ’High’(dNBR 191-255) areas were at 33% and 32%,respectively.The combustion efficiency for burn severity was calculated as 0.43 for crown fire where burn severity was ’High’,as 0.40 for ’Moderate’ severity,and 0.15 for ’Low’ severity surface fire.The emission factors for estimating non-CO 2 GHGs were separately applied to CO 130,CH 4 9,NO x 0.7 and N 2 O 0.11.Non-CO 2 GHGs emissions from biomass burning in the Samcheok forest fire area were estimated to be CO 44.100,CH 4 3.053,NO x 0.238 and N 2 O 0.038 Gg.     

Gas hydrate saturation from acoustic impedance and resistivity logs in the Shenhu area, South China Sea

During the China’s first gas hydrate drilling expedition -1 (GMGS-1), gas hydrate was discovered in layers ranging from 10 to 25 m above the base of gas hydrate stability zone in the Shenhu area, South China Sea. Water chemistry, electrical resistivity logs, and acoustic impedance were used to estimate gas hydrate saturations. Gas hydrate saturations estimated from the chloride concentrations range from 0 to 43% of the pore space. The higher gas hydrate saturations were present in the depth from 152 to 177 m at site SH7 and from 190 to 225 m at site SH2, respectively. Gas hydrate saturations estimated from the resistivity using Archie equation have similar trends to those from chloride concentrations. To examine the variability of gas hydrate saturations away from the wells, acoustic impedances calculated from the 3 D seismic data using constrained sparse inversion method were used. Well logs acquired at site SH7 were incorporated into the inversion by establishing a relation between the water-filled porosity, calculated using gas hydrate saturations estimated from the resistivity logs, and the acoustic impedance, calculated from density and velocity logs. Gas hydrate saturations estimated from acoustic impedance of seismic data are ∼10-23% of the pore space and are comparable to those estimated from the well logs. The uncertainties in estimated gas hydrate saturations from seismic acoustic impedances were mainly from uncertainties associated with inverted acoustic impedance, the empirical relation between the water-filled porosities and acoustic impedances, and assumed background resistivity.     

Three-dimensional topography corrections of magnetotelluric data

Topographic effects due to irregular surface terrain may prevent accurate interpretation of magnetotelluric (MT) data. Three-dimensional (3-D) topographic effects have been investigated for a trapezoidal hill model using an edge finite-element method. The 3-D topography generates significant MT anomalies, and has both galvanic and inductive effects in any polarization. This paper presents two different correction algorithms, which are applied to the impedance tensor and to both electric and magnetic fields, respectively, to reduce topographic effects on MT data. The correction procedures using a homogeneous background resistivity derived from a simple averaging method effectively decrease distortions caused by surface topography, and improve the quality of subsurface interpretation. Nonlinear least-squares inversion of topography-corrected data successfully recovers most of structures including a conductive or resistive dyke.