The response of the mid-latitude thermospheric wind to magnetic activity

Observations of the thermospheric wind at a mid-latitude station have been made using a Fabry-Perot interferometer to measure the Doppler shift of the nighttime OI emission at 630 nm. The results from 12 summer nights show that the zonal wind has a distinct feature associated with magnetic activity. The zonal wind first reverses and becomes westward. The maximum strength of the westward wind, its duration, and the maximum strength of the subsequent eastward wind all increase with increasing magnetic activity. The meridional wind is less consistent in its behaviour. It is normally equatorward but during magnetic activity it can increase, decrease, or even reverse, although it is consistently equatorward and of increased strength after 02.00 L.T. The initial reversal of the zonal wind is consistent with changes in the wind expected as a result of convective electric fields penetrating to mid-latitudes indicating that these electric fields modify the mid-latitude wind pattern before effects due to auroral heating reach mid-latitudes. The reversal of the zonal wind back to eastward may also be the result of electric field effects. The large variability of the meridional wind, to the extent that it becomes poleward at times, indicates the importance of wind sources equatorward of the observatory.     

Possible shrinking of the primary component of epsilon aurigae

Radial velocities of the primary star of Aur are presented for phases outside the eclipse between 1975 and 1985. A violent collapse of the atmosphere has occurred with a velocity of about 40 km s^–1 on October 1977, indicating a decrease of 0.07 AU in the radius for three days. A shrinking of the primary star is suggested from the characteristics of eclipse light curves that the duration of totality has become longer and the duration of eclipse shorter from eclipse to eclipse. The decrement of radius is estimated to be about 16%, 0.2 AU, in recent 27 years.     

Geological and geomorphological characteristics of landslides triggered by the 2004 Mid Niigta prefecture earthquake in Japan

The 2004 Mid Niigta prefecture earthquake (M_JMA 6.8) triggered more than one thousand landslides in the Miocene to Quaternary sedimentary rocks in Japan. The most common landslides were shallow disrupted landslides on steep slopes, which has been common in many previous disastrous earthquakes in the world. The Mid Niigta prefecture earthquake also triggered more than one hundred deep landslides, providing valuable information on the conditions for their occurrence. A field investigation and the interpretation of aerial photographs taken before and after the earthquake suggest that reactivation of existing landslides and undercutting of slopes are the most important factors for deep landslides to be triggered by earthquakes. In addition, planar sliding surfaces seem to be essential for the generation of catastrophic landslides triggered by this earthquake. Planar bedding–parallel sliding surfaces were formed at the boundary between the overlying permeable sandstone and underlying siltstone or along the bedding planes of alternating beds of sandstone and siltstone. Sliding surfaces along the slope-parallel oxidation front were formed in the area of black mudstone. New landslides (rockslide-avalanches) occurred with the sliding surfaces in a several-cm thick tuff interbedded in siltstone. One rockslide-avalanche occurred on a slope where buckling deformation preceded the earthquake. Gentle valley bottom sediments were mobilized in many locations, probably because they were saturated and partial liquefaction had occurred due to the earthquake shaking.     

Petrography and uplift history of the Quaternary Takidani Granodiorite: could it have hosted a supercritical (HDR) geothermal reservoir?

The Quaternary Takidani Granodiorite (Japan Alps) is analogous to the type of deep-seated (3–5 km deep) intrusive-hosted fracture network system that might support (supercritical) hot dry/wet rock (HDR/HWR) energy extraction. The I-type Takidani Granodiorite comprises: porphyritic granodiorite, porphyritic granite, biotite-hornblende granodiorite, hornblende-biotite granodiorite, biotite-hornblende granite and biotite granite facies; the intrusion has a reverse chemical zonation, characterized by >70 wt% SiO₂ at its inferred margin and <67 wt% SiO₂ at the core. Fluid inclusion evidence indicates that fractured Takidani Granodiorite at one time hosted a liquid-dominated, convective hydrothermal system, with <380°C, low-salinity reservoir fluids at hydrostatic (mesothermal) pressure conditions. ‘Healed’ microfractures also trapped >600°C, hypersaline (35 wt% NaCl_eq) fluids of magmatic origin, with inferred minimum pressures of formation being 600–750 bar, which corresponds to fluid entrapment at 2.4–3.0 km depth. Al-in-hornblende geobarometry indicates that hornblende crystallization occurred at about 1.45 Ma (7.7–9.4 km depth) in the (marginal) eastern Takidani Granodiorite, but later (at 1.25 Ma) and shallower (6.5–7.0 km) near the core of the intrusion. The average rate of uplift across the Takidani Granodiorite from the time of hornblende crystallization has been 5.1–5.9 mm/yr (although uplift was about 7.5 mm/yr prior to 1.2 Ma), which is faster than average uplift rates in the Japan Alps (3 mm/yr during the last 2 million years). A temperature–depth–time window, when the Takidani Granodiorite had potential to host an HDR system, would have been when the internal temperature of the intrusive was cooling from 500°C to 400°C. Taking into account the initial (7.5 mm/yr) rate of uplift and effects of erosion, an optimal temperature–time–depth window is proposed: for 500°C at 1.54–1.57 Ma and 5.2±0.9 km (drilling) depth; and 400°C at 1.36–1.38 Ma and 3.3±0.8 km (drilling) depth, which is within the capabilities of modern drilling technologies, and similar to measured temperature–depth profiles in other active hydrothermal systems (e.g. at Kakkonda, Japan).     

Raman spectra of methane hydrate up to 86 GPa

High-pressure Raman studies of methane hydrate were performed using a diamond anvil cell in the pressure range of 0.1–86 GPa at room temperature. Raman spectra of the methane molecules revealed that new softened intramolecular vibration mode of ν ₁ appeared at 17 GPa and that the splitting of vibration mode of ν ₃ occurred at 15 GPa. The appearance of these two modes indicates that an intermolecular attractive interaction increases between the methane molecules and the host water molecules and between the neighboring methane molecules. These interactions might result in the exceptional stability of a high-pressure structure, a filled ice Ih structure (FIIhS) for methane hydrate, up to 40 GPa. At 40 GPa, a clear change in the slope of the Raman shift versus pressure occurred, and above 40 GPa the Raman shift of the vibration modes increased monotonously up to 86 GPa. A previous XRD study showed that the FIIhS transformed into another new high-pressure structure at 40 GPa. The change in the Raman spectra at 40 GPa may be induced by the transition of the structure.     

Pb and Th in settling particles in the western Northwest Pacific Ocean: Particle flux and scavenging

A mooring of three conical time-series sediment traps was deployed at two sites in the western Northwest Pacific Ocean for 9 months. Total mass fluxes and activities of ²¹⁰Pb and ²³⁰Th were determined for the settling particles to elucidate their scavenging and transport processes. Sediment samples also were analyzed for ²¹⁰Pb activities. Total mass fluxes, ²¹⁰Pb fluxes and ²³⁰Th fluxes showed large seasonal variations and their weighted mean fluxes tended to increase with depth, with an especially large increase near-bottom. The ratios of the observed ²¹⁰Pb fluxes to the ²¹⁰Pb deficiency fluxes in the upper traps at the two sites were only 0.02 and 0.12, and were attributable to advective export of ²¹⁰Pb from the surface waters. Those ratios in the near-bottom traps ranged between 1.22 and 2.63. This suggests that these high ratios are due to effective particle scavenging, large lateral ²¹⁰Pb import and input of resuspended particles that have not become incorporated into the sediments. The mean total ²³⁰Th fluxes at the near-bottom traps were 4.2–6.7 times higher than that expected from production in the overlying water column. The ²¹⁰Pb activities in the surficial sediments were much lower than those in the near-bottom traps. The ²¹⁰Pb accumulation rates estimated from the excess ²¹⁰Pb inventory in the sediment column were 40–70% higher than the mean ²¹⁰Pb fluxes at the near-bottom traps. The ratios of the ²¹⁰Pb accumulation rates to the ²¹⁰Pb deficiency fluxes at the near-bottom traps ranged between 2.0 and 3.7. The high fluxes of particulate ²¹⁰Pb and ²³⁰Th at the near-bottom traps reflected a combination of enhanced scavenging of dissolved nuclides and the lateral redistribution of particulate matter by downslope and alongshore transports. However, it was not possible to discriminate among the various processes contributing to high nuclide fluxes.     

The use of sintered diamond anvils in the MA8 type high-pressure apparatus

A new multi-anvil type high-presure apparatus has been developed using sintered diamond anvils to generate pressures over 30 GPa and temperatures up to about 2000°C. A maximum sample volume of about 1 mm³ is available in this system. The pressure was confirmed by dissociation of forsterite into Mg-perovskite and periclase. The basic techniques and problems in utilizing sintered diamond in the MA8 type high-pressure apparatus are discussed with an emphasis on the future prospect of incorporating simultancous X-ray diffraction observation.