Plant diversity and community structure of Brazilian <Emphasis Type="Italic">Páramos</Emphasis>

In Eastern South America, high altitude grasslands represent a mountain system that has a high number of endemic species. However, studies on the ecology of plant communities in these environments remain scarce. We aimed to evaluate the patterns of biodiversity and structure of plant communities from rocky outcrops in high altitude grasslands of three areas at the Caparaó National Park, southeastern Brazil, by sampling 300 randomly distributed plots. Then, we compared the floristic composition, relative abundance, and biological and vegetation spectra among areas. We classified species as endemic and non-endemic and verified the occurrence of endangered species. Species richness was evaluated by rarefaction analysis on the sampling units. The importance value and species abundance distribution (SAD) models were assessed. We also performed an indicator species analysis. We sampled 58 species belonging to 49 genera and 32 families. The number of species decreased with increasing altitude, with significant differences being observed among areas regarding richness, abundance, and cover. Of the total number of species, 10 are endemic to the Caparaó National Park and 17 are listed on the Brazilian Red List of endangered species. The dominant families on all peaks were Asteraceae and Poaceae. The SAD models showed lognormal and geometric distributions, corroborating the fact that 10 species that were common to all three areas were also the most dominant ones in the communities and showed the highest importance values, which ranged between 35% and 60%. Indicator species analysis revealed that 28 species (48.27%) were indicators. Of these, 42.85% had maximum specificity, meaning that they occurred only in one area. Thus, the number of species per life form ratio was similar among areas, yet vegetation spectra differed, especially for hemicryptophytes. The altimetric difference among the areas showed to be a very important driver in the community assembly, influencing the evaluated variables, however, other drivers as soil depth, slope and water could also influence the community structure on a smaller and local spatial scale.     

Retrieving volume FeO and TiO_2 abundances of lunar regolith with CE-2 CELMS data using BPNN method

The volume FeO and TiO_2 abundances(FTAs) of lunar regolith can be more important for understanding the geological evolution of the Moon compared to the optical and gamma-ray results. In this paper, the volume FTAs are retrieved with microwave sounder(CELMS) data from the Chang'E-2 satellite using the back propagation neural network(BPNN) method. Firstly, a three-layered BPNN network with five-dimensional input is constructed by taking nonlinearity into account. Then, the brightness temperature(TB) and surface slope are set as the inputs and the volume FTAs are set as the outputs of the BPNN network.Thereafter, the BPNN network is trained with the corresponding parameters collected from Apollo, Luna,and Surveyor missions. Finally, the volume FTAs are retrieved with the trained BPNN network using the four-channel TBderived from the CELMS data and the surface slope estimated from Lunar Orbiter Laser Altimeter(LOLA) data. The rationality of the retrieved FTAs is verified by comparing with the Clementine UV-VIS results and Lunar Prospector(LP) GRS results. The retrieved volume FTAs enable us to re-evaluate the geological features of the lunar surface. Several important results are as follows. Firstly, very-low-Ti(1.5 wt.%) basalts are the most spatially abundant, and the surfaces with TiO_2 5 wt.% constitute less than 10% of the maria. Also, two linear relationships occur between the FeO abundance(FA) and the TiO_2 abundance before and after the threshold, 16 wt.% for FA. Secondly, a new perspective on mare volcanism is derived with the volume FTAs in several important mare basins, although this conclusion should be verified with more sources of data. Thirdly, FTAs in the lunar regolith change with depth to the uppermost surface,and the change is complex over the lunar surface. Finally, the distribution of volume FTAs hints that the highlands crust is probably homogeneous, at least in terms of the microwave thermophysical parameters.     

水下发射超空泡射弹对UUV平台姿态影响分析

超空泡射弹武器能够突破普通射弹水中运动极限，有效打击水雷等水下目标。针对水下发射超空泡射弹武器的平台适应性开展了初步研究，建立了超空泡射弹武器及 UUV 搭载平台仿真模型，计算分析了水下超空泡射弹武器在不同方位、不同角度发射时 UUV 平台姿态角的变化，得到了水下发射超空泡射弹对 UUV 平台姿态的影响规律，为水下超空泡射弹武器系统及其平台适配性研究提供了依据。     

两株南极枝孢霉属真菌Cladosporium sp.NJF4和NJF6的次级代谢产物研究

南极因其独特的自然环境成为潜在、重要的微生物资源库,是产生新型生物活性物质和先导化合物菌株的潜在种源地,南极微生物正在成为创新药物研究新的重要资源。虽然近年来对南极微生物次级代谢产物的研究逐渐增加,但与温带和热带微生物研究相比仍处于初级阶段。对从南极普里兹湾海洋沉积物中获得的两株枝孢霉属真菌Cladosporium sp. NJF4和NJF6进行次级代谢产物分离及结构鉴定,获得20个化合物。化合物结构类型包括甾醇(1)、倍半萜类(7—8)、生物碱类(9—14)、二酮哌嗪(2—5、15—17)、芳香酸(6、18—19)等,其中倍半萜类(7—8)为首次从枝孢霉属真菌中分离得到,以上研究将为丰富南极微生物次级代谢产物库奠定一定的研究基础。     

An approximate method for evaluating the shear band thickness in saturated soils

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.     

一种从经纬度网格资料获得正方形网格资料的插值方案

本文提出了一种把经纬度网格点上的气象要素值转化到正方形网格点上的多项式插值方案。对插值方案作了稳定性讨论和定量及定性分析。结果表明,这种插值方案方便可行,而且有广泛适用性。     

An explicit representation of steady state response of a beam on an elastic foundation to moving harmonic line loads

A closed‐form deflection response of a beam rest is presented in this paper using the integral transform method. The theory of linear partial differential equations is used to represent the deflection of beam subjected to a moving harmonic line load in integration form. The solution is finally carried out using the inverse Fourier transform. To evaluate the integration analytically, poles of the integrand are identified with the help of algebraic equation theory. Residue theorem is then utilized to represent the integration as a contour integral in the complex plane. Closed‐form deflections and numerical results are provided for different combinations of load frequency and velocity. Copyright © 2002 John Wiley & Sons, Ltd.     

Merging of low-mass systems and the origin of the fundamental plane

We present the preliminary results of a study of how small stellar systems merge to form larger ones. As we display the families of galaxies in the μ_e - R_e plane (effective surface brightness versus effective radius) we realize that different morphological types occupy different loci, evidencing the different physical mechanisms operating in each family. As proposed by Capaccioli et al. (1992) this diagram is the logical equivalent of the HR diagram for stars. Here we take some initial steps in understanding of how we can establish the evolutionary tracks, solely due to dynamical processes, in the μ_e - R_e plane, ultimately making a dwarf elliptical to turn into a normal elliptical galaxy. This revised version was published online in August 2006 with corrections to the Cover Date.     

Approach to Mountain Hazards in Tibet, China

Tibet is located at the southwest boundary of China. It is the main body of the Qinghai-Tibet Plateau, the highest and the youngest plateau in the world. Owing to complicated geology, Neo-tectonic movements, geomorphology, climate and plateau environment, various mountain hazards, such as debris flow, flash flood, landslide, collapse, snow avalanche and snow drifts, are widely distributed along the Jinsha River (the upper reaches of the Yangtze River), the Nu River and the Lancang River in the east, and the Yarlungzangbo River, the Pumqu River and the Poiqu River in the south and southeast of Tibet. The distribution area of mountain hazards in Tibet is about 589,000 km^2, 49.3% of its total territory. In comparison to other mountain regions in China, mountain hazards in Tibet break out unexpectedly with tremendously large scale and endanger the traffic lines, cities and towns, farmland, grassland, mountain environment, and make more dangers to the neighboring countries, such as Nepal, India, Myanmar and Bhutan. To mitigate mountain hazards, some suggestions are proposed in this paper, such as strengthening scientific research, enhancing joint studies, hazards mitigation planning, hazards warning and forecasting, controlling the most disastrous hazards and forbidding unreasonable human exploring activities in mountain areas.