Seismotectonic significance of the 29 January 1989 Etne earthquake, SW Norway

The integrated analysis of geological, seismological and field observations with lineament data derived from satellite images allows the identification of a possible seismogenic fault zone for an earthquake which occurred near Etne in southwestern Norway, on 29 February 1989. The hypocentre of the earthquake was located at the mid-crust at a depth of 13.8±0.9 km which is typical of small intraplate earthquakes. The Etne earthquake occurred as a result of normal faulting with a dextral strike-slip component on a NW–SE trending fault. Available geological and lineament data indicate correlation of the inferred seismogenic fault with the NW–SE trending Etne fault zone. An aeromagnetic anomaly related to the Etne fault zone forms a regional feature intersecting both Precambrian basement and allochthonous Caledonian rocks. Based on these associations the occurrence of the Etne event is ascribed to the reactivation of a zone of weakness along the Etne fault zone. Slope-instabilities developed in the superficial deposits during the Etne event demonstrate the existence of potentially hazardous secondary-effects of such earthquakes even in low seismicity areas such as southwestern Norway.     

Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

Case study on the strategy and application of enhancement solutions to improve remediation of soils contaminated with Cu, Pb and Zn by means of electrodialysis

Numerous studies have been conducted with electrochemical removal of heavy metals from spiked kaolinite. Meanwhile, when moving from kaolinite to real soils, new factors must be taken into account—factors influencing, e.g., the buffering capacity of the soil against acidification and the adsorption/desorption processes of the heavy metals. The present study gives some examples where it is necessary to use an enhancement solution to aid desorption of Cu, Zn and Pb during electrodialytic treatment. Dependent on the composition of the pollution, different choices can be made. In the case of a Cu-polluted calcareous soil, ammonia may be used as enhancement solution, due to the formation of charged complexes between ammonia and Cu. Thus, Cu is mobile at high pH when ammonia is added and Cu can be removed without dissolving the calcareous parts. Zn is also mobilized by ammonia, but to a lesser extent than Cu. In the case of Cu, Zn and Pb at the same time, alkaline ammonium citrate may be a solution. It was shown that this enhancement solution could mobilize these three pollutants, but optimization of concentration and pH of the ammonium citrate is still needed. When choosing a remediation scheme for electrochemical treatment of an actual industrially polluted soil, this scheme must be chosen on basis of characterization of soil and pollution combination.     

Impact of Hydropower Regulation on River Water Composition in Northern Sweden

Using hydrogeochemical analysis of two large boreal rivers (pristine Kalix and hydropower regulated Lule) discharging into the Gulf of Bothnia, the major impacts of regulation on water discharge, element transport and their seasonal redistribution have been assessed. The pre-regulation hydrogeochemical features were assumed to be similar for the two rivers. For the Lule River, the average maximum runoff was almost halved, while the average minimum was tripled as a result of the regulation. The fraction of winter transport of total organic carbon (TOC), Fe, Si, suspended Mn and P in the Lule River was, according to a conservative estimate, two to three times higher than in the pristine river. Longer residence time in the Lule River delayed arrival of the suspended Mn peak and dissolved Si decline to the river mouth. During summer, the suspended C/N ratio in the regulated river was 10–20 compared to <10 for the pristine, suggesting presence of predominantly old organic material. This was supported by a virtually constant suspended P/Fe ratio throughout the year in the Lule River, indicating low abundance of phytoplankton. TOC varied irregularly in the Lule River suggesting temporal disconnection between the river and the upper riparian zone. The disappearance of the spring flow maximum, a shift of element transport from spring to winter and supply of mainly old organic material during the vegetation growth season may have a pronounced impact on the ecosystem of the Gulf of Bothnia and the river itself.     

Comparison of three types of laser optical disdrometers under natural rainfall conditions

ABSTRACT

Optical disdrometers can be used to estimate rainfall erosivity; however, the relative accuracy of different disdrometers is unclear. This study compared three types of optical laser-based disdrometers to quantify differences in measured rainfall characteristics and to develop correction factors for kinetic energy (KE). Two identical PWS100 (Campbell Scientific), one Laser Precipitation Monitor (Thies Clima) and a first-generation Parsivel (OTT) were collocated with a weighing rain gauge (OTT Pluvio²) at a site in Austria. All disdrometers underestimated total rainfall compared to the rain gauge with relative biases from 2% to 29%. Differences in drop size distribution and velocity resulted in different KE estimates. By applying a linear regression to the KE–intensity relationship of each disdrometer, a correction factor for KE between the disdrometers was developed. This factor ranged from 1.15 to 1.36 and allowed comparison of KE between different disdrometer types despite differences in measured drop size and velocity.     

The global warming potential of two healthy Nordic diets compared with the average Danish diet

The potential greenhouse gas (GHG) emissions from the production of food for three different diets are compared using consequential Life Cycle Assessment. Diet 1 is an Average Danish Diet (ADD); diet 2 is based on the Nordic Nutritional Recommendations (NNR), whilst diet 3 is a New Nordic Diet (NND) developed by the OPUS project. The NND contains locally produced Nordic foods where more than 75 % is organically produced. NNR and NND include less meat and more fruit and vegetables than the ADD. All diets were adjusted to contain a similar energy and protein content. The GHG emissions from the provision of NNR and NND were lower than for ADD, 8 % and 7 % respectively. If GHG emissions from transport (locally produced versus imported food) are also taken into account, the difference in GHG emissions between NND and ADD increases to 12 %. If the production method (organic versus conventional) is taken into account so that the ADD contains the actual ratio of organically produced food (6.6 %) and the NND contains 80 %, the GHG emissions for the NND are only 6 % less than for the ADD. When the NND was optimised to be more climate friendly, the global warming potential of the NND was 27 % lower than it was for the ADD. This was achieved by including less beef, and only including organic produce if the GHG emissions are lower than for the conventional version, or by substituting all meat with legumes, dairy products and eggs.     

Assessment of marine debris on the Belgian Continental Shelf

A comprehensive assessment of marine litter in three environmental compartments of Belgian coastal waters was performed. Abundance, weight and composition of marine debris, including microplastics, was assessed by performing beach, sea surface and seafloor monitoring campaigns during two consecutive years. Plastic items were the dominant type of macrodebris recorded: over 95% of debris present in the three sampled marine compartments were plastic. In general, concentrations of macrodebris were quite high. Especially the number of beached debris reached very high levels: on average 6429 ± 6767 items per 100 m were recorded. Microplastic concentrations were determined to assess overall abundance in the different marine compartments of the Belgian Continental Shelf. In terms of weight, macrodebris still dominates the pollution of beaches, but in the water column and in the seafloor microplastics appear to be of higher importance: here, microplastic weight is approximately 100 times and 400 times higher, respectively, than macrodebris weight.     

Groundwater monitoring in Denmark: characteristics, perspectives and comparison with other countries

More than 99% of water use in Denmark is based on groundwater. Denmark has had a comprehensive national groundwater-monitoring programme since 1988 based on 74 well catchment areas and six small agricultural catchments with more than 1,500 screens at different depths for regular, mostly annual, water quality sampling. In addition, water samples from 10,000 abstraction wells are analysed every 3–5 years. The water is analysed for main components, inorganic trace elements, organic micro pollutants, and pesticides and their metabolites. A unique feature is the 20-year time-series data of inorganic pollutants. Groundwater modelling supports traditional monitoring to improve the conceptual geological understanding and to assess the quantitative status and the interaction between groundwater and surface water. The programme has been continuously adjusted to incorporate new knowledge from research programmes and meet new policy demands, currently the European Union Water Framework Directive, particularly with respect to an increased focus on quantitative aspects and on the groundwater/surface water interaction. The strengths and weaknesses of the Danish programme are assessed and compared with other national groundwater-monitoring programmes. Issues discussed include: strategic considerations for monitoring design, the link between research and monitoring, and adoption of responses to climate changes.