Groundwater resources evaluation in calcareous limestone using geoelectrical and VLF-EM surveys (El Salloum Basin,Egypt)

Understanding and developing groundwater resources in arid regions such as El Salloum basin, along the northwestern coast of Egypt, remains a challenging issue. One-dimensional (1D) electrical sounding (ES), two-dimensional (2D) electrical resistivity imaging (ERI), and very low frequency electromagnetic (VLF-EM) measurements were used to investigate the hydrogeological framework of El Salloum basin with the aim of determining the potential for extraction of potable water. 1D resistivity sounding models were used to delineate geoelectric sections and water-bearing layers. 2D ERI highlighted decreases in resistivity with depth, attributed to clay-rich limestone combined with seawater intrusion towards the coast. A depth of investigation (DOI) index was used to constrain the information content of the images at depths up to 100 m. The VLF-EM survey identified likely faults/fractured zones across the study area. A combined analysis of the datasets of the 1D ES, 2D ERI, and VLF-EM methods identified potential zones of groundwater, the extent of seawater intrusion, and major hydrogeological structures (fracture zones) in El Salloum basin. The equivalent geologic layers suggest that the main aquifer in the basin is the fractured chalky limestone middle Miocene) south of the coastal plain of the study area. Sites likely to provide significant volumes of potable water were identified based on relatively high resistivity and thickness of laterally extensive layers. The most promising locations for drilling productive wells are in the south and southeastern parts of the region, where the potential for potable groundwater increases substantially.

     

Kuwaiti national assembly — 1992 a study in electoral geography

The study of electoral geography in Kuwait has proven to be an interesting field for its reflection of a regional and national democratic approach in governing the state. The first consultative council was established in 1920, to be followed by the first legislative council in 1938 formed by means of elections. These two councils gave way to the first formation of a state parliament in 1963. Its history was faltered a number of times firstly in 1976 and secondly in 1986.Following the liberation, Kuwait restored its parliamentary life and elections took place on October, 5th 1992. Elections results were different to those of the previous ones where tribalism and sectarianism (Sunnis vis-a-vis Shiites) had little effect on the final results of the votes. Nevertheless, religious fundamentalist movements succeeded in winning more seats than in the past.Kuwaitis in general have become convinced that democracy is the right path for ruling the country, therefore Kuwaitis are very eager to see the success of their parliamentary experience not just for them but for the sake of the entire Gulf region.     

Marine electrical resistivity imaging of submarine groundwater discharge: sensitivity analysis and application in Waquoit Bay, Massachusetts, USA

Electrical resistivity imaging has been used in coastal settings to characterize fresh submarine groundwater discharge and the position of the freshwater/salt-water interface because of the relation of bulk electrical conductivity to pore-fluid conductivity, which in turn is a function of salinity. Interpretation of tomograms for hydrologic processes is complicated by inversion artifacts, uncertainty associated with survey geometry limitations, measurement errors, and choice of regularization method. Variation of seawater over tidal cycles poses unique challenges for inversion. The capabilities and limitations of resistivity imaging are presented for characterizing the distribution of freshwater and saltwater beneath a beach. The experimental results provide new insight into fresh submarine groundwater discharge at Waquoit Bay National Estuarine Research Reserve, East Falmouth, Massachusetts (USA). Tomograms from the experimental data indicate that fresh submarine groundwater discharge may shut down at high tide, whereas temperature data indicate that the discharge continues throughout the tidal cycle. Sensitivity analysis and synthetic modeling provide insight into resolving power in the presence of a time-varying saline water layer. In general, vertical electrodes and cross-hole measurements improve the inversion results regardless of the tidal level, whereas the resolution of surface arrays is more sensitive to time-varying saline water layer.     

Does a representative volume element exist for fatigue life prediction? The case of aggregate composites

In a previous work, discrete modeling and a statistical approach were used to quantify the minimal representative volume element (RVE) size for aggregate composites, such as bituminous materials in the linear elastic regime (Comput. Mater. Sci. 2005; 33 :467–490). In this paper, the discrete model is extended to strain‐softening behavior under cyclic loading. The existence of a RVE for fatigue life prediction is numerically proved and its minimal size is determined. It is found that it is much larger than the minimal RVE size in the elastic regime. Copyright © 2007 John Wiley & Sons, Ltd.     

Heating–freezing effects on the pore size distribution of a kaolinite clay

This study aims to quantify the effect of heating and freezing temperatures on the pore size distribution of saturated clays. Three kaolinite clay specimens were subjected to different temperatures: 20, 70, and ? 10 °C. Upon achieving the desired temperature for each specimen, the specimens were flash frozen in liquid nitrogen to preserve their microstructure. Each specimen was, then, freeze-dried for 24 h after which consecutive two-dimensional (2-D) SEM images were taken using a dual focused ion beam/scanning electron microscope. The produced 2-D images of each specimen were used to reconstruct three-dimensional tomographies of the specimens, which were analyzed to determine the pore size distribution at each temperature. Compared to the specimen at room temperature, the pores in the specimen subjected to ? 10 °C were larger; this is believed to be due to the formation of ice lenses inside the pores upon freezing and potential merging between initial pores to form larger pores. On the other hand, the heated specimen showed an increase in the volume of the smaller pores and a decrease in the volume of the larger pores compared to the specimen at room temperature. This opposite behavior between the small and large pores in the heated specimen is justified considering (1) the easier flow of water out of the larger pores compared to that in the smaller pores and (2) the anisotropic nature of the thermal expansion of the clay particles.     

Effects of Explicit Urban-Canopy Representation on Local Circulations Above a Tropical Mega-City

The Advanced Regional Prediction System (ARPS) is coupled with the tropical town energy budget (tTEB) scheme to analyze the effects of the urban canopy circulation over the metropolitan area of São Paulo and its interactions with the sea breeze and mountain-valley circulation in the eastern state of São Paulo, Brazil. Two experiments are carried out for the typical sea-breeze event occurring on 22 August 2014 under weak synoptic forcing and clear-sky conditions: (a) a control run with the default semi-desert surface parametrization and; (b) a tTEB run for the urban canopy of São Paulo. A realistic land-use database over the south-eastern domain of Brazil is used in the downscaling simulation to a horizontal grid resolution of 3 km. Our results indicate that ARPS effectively simulates features of the nighttime and early morning land-breeze circulation, which is affected by the surrounding hills and the nocturnal heat island of São Paulo. By early afternoon, the south-eastern sea-breeze circulation moves inland perpendicular to the upslope of the Serra do Mar scarp, which generates a line of moisture convergence and updrafts further inland. Later, the convergence line reaches São Paulo and interacts with the circulation arising from the urban heat island (UHI), which increases the moisture convergence and strength of updrafts. The surface energy balance indicates that the UHI is caused by large sensible heat storage within the urban canopy during the day, which is later released in the afternoon and at night. The simulations are verified with available radiosonde and surface weather station data, land-surface-temperature estimates from the moderate resolution imaging spectroradiometer, as well as the National Center for Atmospheric Research reanalysis databases. The three-dimensional geometry of the urban canyons within the tTEB scheme consistently improves the thermodynamically-induced circulation over São Paulo.     

Rocking,wobbling and overturning of the multidrum columns of Baalbek under periodic pulses

Journal of Seismology - A three dimensional distinct element model was developed for the multiblock Baalbek columns to investigate the response of the existing columns as well as 0.5m and 1m scaled...     

Exploration and decision-making in geotechnical engineering – a case study

ABSTRACT

The paper presents methodologies for exploration planning under uncertain conditions based on virtual exploration and Bayesian updating. The process starts with site characterization using existing information to produce geologic profiles. Initial distributions of cost and time are obtained with a Bayesian network model that optimizes the construction strategy for particular geologic conditions. This is followed by the unique step to determine with a “virtual exploration” if additional exploration (e.g. borings) is warranted, and if so, where it should be best done. All this is then applied to the planned Abu Dhabi subway tunnels providing the transportation planners with necessary information for planning and design.