Dynamic modelling of retrogressive landslides with emphasis on the role of clay sensitivity

This paper presents a detailed numerical study of the retrogressive failure of landslides in sensitive clays. The dynamic modelling of the landslides is carried out using a novel continuum approach, the particle finite element method, complemented with an elastoviscoplastic constitutive model. The multiwedge failure mode in the collapse is captured successfully, and the multiple retrogressive failures that have been widely observed in landslides in sensitive clays are reproduced with the failure mechanism, the kinematics, and the deposition being discussed in detail. Special attention has been paid to the role of the clay sensitivity on each retrogressive failure as well as on the final retrogression distance and the final run‐out distance via parametric studies. Moreover, the effects of the viscosity of sensitive clays on the failure are also investigated for different clay sensitivities.     

On the Nonlinear Thermal Evolution of Solar Corona Structures

The thermal evolution of structures is investigated for different values of the size of structure. A simplified cooling function and a constant heating mechanism are assumed. Analytical criteria for thermal instability are obtained. It is found that the response of the thermal structure not only depends on the amplitude of the disturbances, but also on whether the disturbance increases or decreases the initial steady temperature. Additionally, the evolution of the structure is examined numerically by using a time-dependent code under the assumption that the inertia terms are small. In particular, the analytical criteria obtained for thermal instability are verified.     

The biomass of macro- and interstitial fauna on clean and wrack-covered beaches in Western Australia

The benthic faunal spectrum including bacteria, protozoans, meiofauna, wrack epifauna and macrofauna, was quantitatively surveyed on two modally reflective, moderate energy, Western Australian beaches. The more exposed beach had coarser sand, no intertidal macrofauna and a poor interstitial fauna. The less exposed beach had a large deposit of wrack totalling 161 kg m^?1 dry mass concentrated on the lower shore. The amphipod Allorchestes compressa was abundant in the fresh wrack comprising most of the macrofauna. There were also fairly abundant small epifauna on the wrack. Dry biomass of macrofauna, epifauna, meiofauna, protozoans and bacteria was 0, 0, 15, 4 and 180 g m^?1 on the more exposed beach and 160, 3, 112, 9 and 901 g m^?1 on the less exposed beach with wrack. On the latter beach there was an inverse correlation between meiofaunal densities and the densities of protozoans and bacteria, suggesting grazing by the former on the latter. On both beaches meiofauna was concentrated in the mid- to upper beach, protozoans near the surface and bacteria in the mid- to lower beach. It is estimated that bacteria are responsible for most of the secondary production on both beaches.     

Deuterated hydrogen molecule and search for early structure-formation signatures in the Universe

Possible detection of signatures of structure formation at the end of the 'dark age' epoch  ( z ∼ 40–20)  is examined. We discuss the spectral–spatial fluctuations in the cosmic microwave background radiation (CMBR) temperature produced by elastic resonant scattering of CMBR photons on deuterated hydrogen (HD) molecules located in protostructures moving with peculiar velocity. Detailed chemical kinematic evolution of HD molecules in the expanding homogeneous medium is calculated. Then, the HD abundances are linked to protostructures at their maximum expansion, whose properties are estimated by using the top-hat spherical approach and the Λ cold dark matter (ΛCDM) cosmology. We find that the optical depths in the HD three lowest pure rotational lines for high-peak protohaloes at their maximum expansion are much higher than those in LiH molecule. The corresponding spectral–spatial fluctuation amplitudes, however, are probably too weak to be detected by current and forthcoming millimetre telescope facilities. We extend our estimates of spectral–spatial fluctuations to gas clouds inside collapsed CDM haloes by using results from a crude model of HD production in these clouds. The fluctuations for the highest peak CDM haloes at redshifts ∼20–30 could be detected in the future. Observations will be important to test model predictions of early structure formation in the Universe.     

On the self-consistency of evolutionary synthesis models

Evolutionary synthesis models have been used to study the physical properties of unresolved populations in a wide range of scenarios. Unfortunately, their self-consistency is difficult to test and there are some theoretical open questions without an answer: (1) The change of the homology relations assumed in the computation of isochrones due to the effect of stellar winds (or rotation) and the discontinuities in the stellar evolution are not considered. (2) There is no consensus about how the isochrones must be integrated. (3) The discreteness of the stellar populations (that produce an intrinsic statistical dispersion) usually are not taken into account, and model results are interpreted in a deterministic way instead of a statistical one. The objective of this contribution is to present some inconsistencies in the computation and some cautions in the application of the results of such codes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Chemical abundances determined from meteor spectra: I. Ratios of the main chemical elements

Abstract— Relative chemical abundances of 13 meteoroids were determined by averaging the composition of the radiating gas along the fireball path that originated during their penetration into the Earth's atmosphere. Mg, Fe, Ni, Cr, Mn, and Co abundances, relative to Si, are similar to those reported for CI and CM carbonaceous chondrites and interplanetary dust particles. In contrast, relative abundances of Ca and Ti in meteor spectra indicate that these elements suffer incomplete evaporation processes. The chemical composition of all meteoroids studied in this work differs from that of 1P/Halley dust.     

微波消解ICP-AES法测定石油样品中镍钒铝硅

Ni、V、Al、Si是石油的天然组分。其中Ni和V来源于形成石油的原始物质,它们易形成大而复杂的分子,从而使沸点非常高。含Ni和V的化合物在提炼过程中无法蒸馏,不能很经济地从燃料中去除。Ni、V、Al、Si在燃烧时会生成不同的氧化物,沉积在化学反应器(如发动机)的冷却器表面,形成黏着物并引起腐蚀;另外这些元素可能灭活提炼过程中的催化剂。可见,测定Ni、V、Al、Si对于炼油工业非常重要。1仪器样品消解采用奥地利安东帕公司(Anton Paar GmbH)生产的Multiwave 3000微波消解系统,配有8位超高压转子。消解后的样品中痕量元素的分析用Optima 3000电感耦合等离子体发射光     

Heavy metals in sediments of the Tecate River, Mexico

Ten sites along the Tecate River, Mexico were sampled to evaluate the cadmium, lead, nickel and chromium concentrations in sediments. The result shows contamination for cadmium in most of the sites, where two sites were class 4 (polluted to strongly polluted) according to geoaccumulation index proposed by Muller. Two sites were found polluted for all the heavy metals analyzed (Cr, Cd, Pb and Ni), indicating the effect of anthropogenic activities. A correlation between Ni and Cd concentration had been found indicating a common source. These metals are usually used in electroplating industry. The results of this study can be used for decision makers to prioritize measures to control the pollution for these metals.     

Quick-look assessments to identify optimal CO2 EOR storage sites

A newly developed, multistage quick-look methodology allows for the efficient screening of an unmanageably large number of reservoirs to generate a workable set of sites that closely match the requirements for optimal CO₂ enhanced oil recovery (EOR) storage. The objective of the study is to quickly identify miscible CO₂ EOR candidates in areas that contain thousands of reservoirs and to estimate additional oil recovery and sequestration capacities of selected top options through dimensionless modeling and reservoir characterization. Quick-look assessments indicate that the CO₂ EOR resource potential along the US Gulf Coast is 4.7 billion barrels, and CO₂ sequestration capacity is 2.6 billion metric tons. In the first stage, oil reservoirs are screened and ranked in terms of technical and practical feasibility for miscible CO₂ EOR. The second stage provides quick estimates of CO₂ EOR potential and sequestration capacities. In the third stage, a dimensionless group model is applied to a selected set of sites to improve the estimates of oil recovery and storage potential using appropriate inputs for rock and fluid properties, disregarding reservoir architecture and sweep design. The fourth stage validates and refines the results by simulating flow in a model that describes the internal architecture and fluid distribution in the reservoir. The stated approach both saves time and allows more resources to be applied to the best candidate sites.