Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

BORDER PORT MANZHOULh URBAN FUNCTION AND SPACE DEVELOPMENT

Manzhouli is the largest land port city on the Sino-Russia border, transit cargo through the land port amount-ed to 5.95 million tons, transit tourists were 304 500 in 2000. It stands at the joint place of China, Mongolia and Russi-a, faces to Siberia area of Russia, receives direct support from the Northeast China and Bohai Sea Rim Area, and possess-es priorities in geographical location, land port infrastructure, water resources, coal resources, tourist resources andgreat potentiality in economic cooperation with Russia. The future urban function is a key port on the First Eurasia Continen-tal Bridge. Manzhouli Port will keep its first place between China and Russia land transport, and it is forecasted that thetransit amount through Manzhouli Port will go up to 10 million tons in 2005 and 20 million tons in 2010. It will be construct-ed to be a trade center of the peripheral area extending to Russia and Mongolia, a key export-oriented processing industri-al zone supported by industries such as export processing industries, export agriculture, trade services, technology trad-ing and the other service industries. It keeps being a well-known touring city for trade, shopping, sightseeing, vocation,local food, recreation and cultural events. To build Manzhouli Export Processing Industry Zone will improve city econom-ic structure, and the main sectors are organic food processing, livestock products processing, garment and furniture indus-try. Moreover, Manzhouli Export Processing Industry Zone will eventually be upgraded to be a border free trade zone.The city functional transition will inevitably affect urban spatial restructure and its expansion. The city space transforma-tion will develop as such: one development axis of No. 301 highway paralleling with Bin - Zhou(Harbin - Manzhouli) rail-way which cuts through central part of Manzhouli City, and links Zhalainuocr District with central city; three urban unitsincluding central city, Zhalainuocr District and Manzhouli Interchange Trade Zone; cohesion with Aoerjin and Cuogangpastures; regional dual-nuclei structure of Hailaer City and Manhzouli City; and the Manzhouli-Zabaykalsk Free TradeZone.     

Small hypervelocity particles captured in aerogel collectors: Location,extraction, handling and storage

Abstract— It has now been about a decade since the first demonstrations that hypervelocity particles could be captured, partially intact, in aerogel collectors. But the initial promise of a bonanza of partially‐intact extraterrestrial particles, collected in space, has yet to materialize. One of the difficulties that investigators have encountered is that the location, extraction, handling and analysis of very small (10 μm and less) grains, which constitute the vast majority of the captured particles, is challenging and burdensome. Furthermore, current extraction techniques tend to be destructive over large areas of the collectors. Here we describe our efforts to alleviate some of these difficulties. We have learned how to rapidly and efficiently locate captured particles in aerogel collectors, using an automated microscopic scanning system originally developed for experimental nuclear astrophysics. We have learned how to precisely excavate small access tunnels and trenches using an automated micromanipulator and glass microneedles as tools. These excavations are only destructive to the collector in a very small area—this feature may be particularly important for excavations in the precious Stardust collectors. Using actuatable silicon microtweezers, we have learned how to extract and store “naked” particles—essentially free of aerogel—as small as 3 μm in size. We have also developed a technique for extracting particles, along with their terminal tracks, still embedded in small cubical aerogel blocks. We have developed a novel method for storing very small particles in etched nuclear tracks. We have applied these techniques to the extraction and storage of grains captured in aerogel collectors (Particle Impact Experiment, Orbital Debris Collector Experiment, Comet‐99) in low Earth orbit.     

Discovery of 13 New Variable Stars in the Field of the Open Cluster NGC 2168 （M35）

A wide-field time-series CCD photometric survey of variable stars in the field of the open cluster NGC 2168 was carried out using the BATC Schmidt telescope. In total 13 new variable stars are discovered with three W UMa systems, one EA type and two EB type eclipsing binaries (one of them could be a W UMa system), and seven pulsating stars including three candidates of δScuti stars.     

Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

Non‐equilibrium concepts lead to a unified explanation of the formation of chondrules and chondrites

Abstract— Calculations of the formation of seven types of chondrules in Semarkona from a gas of solar composition were performed with the FACT computer program to predict the chemistries of oxides (including silicates), developed by the authors and their colleagues. The constrained equilibrium theory was used in the calculations with two nucleation constraints suggested by nucleation theory. The first constraint was the blocking of Fe and other metal gaseous atoms from condensing to form solids or liquids because of very high surface free energies and high surface tensions of the solid and liquid metals, respectively. The second constraint was the blocking of the condensation of solids and the formation of metastable liquid oxides (including silicates) well below their liquidus temperatures. Our laboratory experiments suggested subcooling of type IIA chondrule compositions of 400 degrees or more below the liquidus temperature. The blocking of iron leads to a supersaturation of Fe atoms, so that the partial pressure of Fe (p_Fe) is larger than the partial pressure at equilibrium (p_Fe(eq)). The supersaturation ratio S = p_Fe/p_Fe(eq) becomes larger than 1 and increases rapidly with a decrease in temperature. This drives the reaction Fe + H₂O ? H₂ + FeO to the right. With S = 100, the activity of FeO in the liquid droplet is 100 times as large as the value at equilibrium. The FeO activities are a function of temperature and provide relative average temperatures of the crystallization of chondrules. Our calculations for the LL3.0 chondrite Semarkona and our study of some non‐equilibrium effects lead to accurate representations of the compositions of chondrules of types IA, IAB, IB, IIA, IIAB, IIB, and CC. Our concepts readily explain both the variety of FeO concentrations in the different chondrule types and the entire process of chondrule formation. Our theory is unified and could possibly explain the formation of chondrules in all chondritic meteorites as well as provide a simple explanation for the complex chemistries of chondrites, and especially for type 3 chondrites.     

A possible method for the determination of the magnitude and inclination of a sunspot magnetic-field

A method is presented in this paper for the determination of both the H and the γ of a sunspot magnetic field by means of two polarizers with transmission axes inclined at ± 45° to the fast axis of a quarter-wave plate. Previously, this arrangement was used to determine H only.It is shown that the profiles of the Stokes parameters are sensitive to the sunspot atmosphere model used whereas the results given by the present method are not. It is shown, more ever, that the formula for determining H from the wave length shift, Δλ = 4.67 × 10^?5gHλ², cannot be used in many cases.     

Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

青藏块体东北缘断层形变与中强地震

对祁连山－海原断裂带近期断层形变特征进行了初步研究，发现多场地，大范围的断层活动异常是中等强度地震发生的显著背景，并且往往与大陆地震活动的阶段性总体状况相呼应；区域形变存在明显的特征量，包括特征形态和特征时间，同一场地在不同地震前的异常特征具有重复性，但会受到背景差异显著的不同地震的影响，目前形变状况表明研究区仍具有发生中强地震的地壳运动背景。