Optical spectrum based measurement of flotation slurry contents

Monitoring and control of a flotation circuit is mainly based on the information gained by assaying the process slurry lines. In flotation plants, usually an X-ray fluorescence analyzer is used to obtain the on-line assays. This article introduces the visual and near-infrared reflectance spectroscopic analysis of the process slurries as a supplementary method which complements the on-line assay information available from an X-ray fluorescence analyzer. It is shown that the spectral information can be used to accurately predict the element contents in the slurry in between successive XRF analyses. Since the spectral measurements can be taken with high frequency as opposed to the sparse X-ray fluorescence analysis, a practically continuous on-line estimate of the slurry contents is reached. These estimates can be used in the plant control to improve the overall performance of the circuits and to yield also economical savings. Additionally, the frequent monitoring of the grades can provide means to eliminate rapid disturbances in the circuits, thus improving the stability of the process.     

Geochemical cycling in the Hooghly estuary, India

U–Th decay series isotopes, δ¹⁸O and Si measurements in the river estuarine waters and sediments of the polluted Hooghly estuary as well as the surface waters of the Bay of Bengal, its high salinity end member, are reported. Dissolved Si indicates that there are probably two mixing regimes, dissolved U behaviour is nonconservative and δ¹⁸O behaves conservatively in the overall estuarine region. Isotopes of reactive elements, viz. ²³⁴Th and ²¹⁰Po, are removed from the estuarine waters in <2 days and <1 month, respectively, which is due to high suspended matter (30–301 mg l⁻¹). ²²⁸Ra and ²²⁶Ra are profusely released into the estuarine waters in the low to mid-salinity regions.As expected, the opposite trend is observed in the case of estuarine sediments and suspended matter. Reactive isotopes of Th, ²¹⁰Pb and ²¹⁰Po are enriched, whereas Ra isotopes are depleted with respect to their parent nuclides in the estuarine sediments and suspended matter. ²³²Th/Al ratio appears well suited to study the distribution and mixing of the bed load sediments of the Ganga–Brahmaputra (G–B) and the Hooghly rivers with those from other rivers on the Bay of Bengal floor.     

Geoarchaeological Investigations in Mesoamerica Move into the 21st Century: A Review

Over the past thirty years, geoarchaeology has moved from the fringe to mainstream status within Mesoamerican archaeological investigations. This review focuses on works published since the year 2000. Five themes are identified as central to recent studies: (1) the correlation of environmental change and cultural history; (2) anthropogenic environmental impacts; (3) ancient land cover, land use, and diet; (4) archaeological prospection; and (5) provenance studies. These themes are often interwoven in the application of complex systems approaches that allow scientists to more accurately model the intricacies of ancient human–environment interactions.     

Effects of salinity on egg and fecal pellet production,development and survival,adult sex ratio and total life span in the calanoid copepod, <Emphasis Type="Italic">Acartia tonsa</Emphasis>: a laboratory study

The effects of salinity on the copepod, Acartia tonsa in terms of daily egg production rate (EPR), hatching success, fecal pellet production rate (FPR), naupliar development time and survival, sex ratio, and total life span were determined in laboratory conditions through three experiments. In experiment 1, EPR, hatching success, and FPR of individual females were monitored at salinities of 13, 20, 35 and 45 during short-periods (seven consecutive days). Results show EPR was affected by salinity with the highest outputs recorded at 20 and 35, respectively, which were considerably higher than those at 13 and 45. Mean FPR was also higher in 35 and 20. In experiment 2, the same parameters were evaluated over total life span of females (long-term study). The best EPR and FPR were observed in 35, which was statistically higher than at 13 and 20. In experiment 3, survival rates of early nauplii until adult stage were lowest at a salinity of 13. The development time increased with increasing of salinity. Female percentage clearly decreased with increasing salinity. Higher female percentages (56.7% and 52.2%, respectively) were significantly observed at two salinities of 13 and 20 compared to that at 35 (25%). Total longevity of females was not affected by salinity increment. Based on our results, for mass culture we recommend that a salinity of 35 be adopted due to higher reproductive performances, better feeding, and faster development of A. tonsa.     

Monitoring of Snow Cover Variability in Chenab Basin Using IRS AWiFS Sensor

Monitoring of seasonal snow cover is important for many applications such as melt runoff estimation, climate change studies and strategic requirements. Contribution of seasonal snow melt runoff of Chenab River is significant and important to meet hydrological requirement at foothills. Seasonal snow cover of Chandra, Bhaga, Miyar, Bhut, Warwan and Ravi, six major tributaries of Chenab River, becomes crucial to assess the water availability. In addition, altitudinal distribution of snow cover significantly influences the melt runoff which is highly sensitive to minor variations in atmospheric temperature. In this investigation, remote sensing based Normalized Difference Snow Index technique has been used to generate 10 daily snow cover product. Snow cover monitoring of all the sub-basins were carried out for 10 years from 2004–2005 to 2013–2014 during hydrological year (October to June) using Advanced Wide Field Sensor (AWiFS) of Indian remote sensing satellite (IRS). Accumulation and ablation patterns of snow cover have also been analyzed for the six sub-basins. Accumulation and ablation pattern of snow cover, from 2004 to 2014 which shows slightly increasing trend for all the sub-basins. Meteorological data of Kelong at Bhaga sub-basin was also analysed. Average monthly snow line altitude was estimated for all the sub-basins using hypsographic curve. Chandra and Bhaga sub-basins are at higher altitude and Ravi sub-basin is at lower altitude. It was also observed that areal extent of snow reaches to lower altitude during last 5 years, particularly in Ravi sub-basin.     

Characterisation of recharge processes and groundwater flow mechanisms in weathered-fractured granites of Hyderabad (India) using isotopes

In order to address the problem of realistic assessment of groundwater potential and its sustainability, it is vital to study the recharge processes and mechanism of groundwater flow in fractured hard rocks, where inhomogeneties and discontinuities have a dominant role to play. Wide variations in chloride, δ¹⁸O and ¹⁴C concentrations of the studied groundwaters observed in space and time could only reflect the heterogeneous hydrogeological setting in the fractured granites of Hyderabad (India). This paper, based on the observed isotopic and environmental chloride variations of the groundwater system, puts forth two broad types of groundwaters involving various recharge processes and flow mechanisms in the studied granitic hard rock aquifers. Relatively high ¹⁴C ages (1300 to ～6000 yr B.P.), δ¹⁸O content (?3.2 to ?1.5‰) and chloride concentration (<100 mg/l) are the signatures that identified one broad set of groundwaters resulting from recharge through weathered zone and subsequent movement through extensive sheet joints. The second set of groundwaters possessed an age range Modern to ～1000 yr B.P., chloride in the range 100 to ～350 mg/l and δ¹⁸O from ?3.2 to +1.7‰. The δ¹⁸O enrichment and chloride concentration, further helped in the segregation of the second set of groundwaters into three sub-sets characterized by different recharge processes and sources. Based on these processes and mechanisms, a conceptual hydrogeologic model has evolved suggesting that the fracture network is connected either to a distant recharge source or to a surface reservoir (evaporating water bodies) apart from overlying weathered zone, explaining various resultant groundwaters having varying ¹⁴C ages, chloride and δ¹⁸O concentrations. The surface reservoir contribution to groundwater is evaluated to be significant (40 to 70%) in one subset of groundwaters. The conceptual hydrogeologic model, thus evolved, can aid in understanding the mechanism of groundwater flow as well as migration of contaminants to deep groundwater in other fractured granitic areas.     

A 3 km atmospheric boundary layer on Titan indicated by dune spacing and Huygens data

Some 20% of Titan’s surface is covered in large linear dunes that resemble in morphology, size and spacing (1-3 km) those seen on Earth. Although gravity, atmospheric density and sand composition are very different on these two worlds, this coincident size scale suggests that the controlling parameter limiting the growth of giant dunes, namely the boundary layer thickness (Andreotti et al., 2009). Nature, 457, 1120-1123], is similar. We show that a ∼3 km boundary layer thickness is supported by Huygens descent data and is consistent with results from Global Circulation Models taking the distinctive thermal inertia and albedo of the dune sands into account. While the boundary layer thickness on Earth controlling dunes can vary by an order of magnitude depending on the proximity of oceans, which have very different thermal properties from dry land, the relative invariance of dune spacing on Titan is consistent with relatively uniform thermal properties near the dunes and no prominent variation with latitude is seen.     

Geometric test field calibration of digital photogrammetric sensors

Test field system calibration will be a fundamental part of the future photogrammetric production line. Accurate calibration and performance evaluations are necessary for fully assessing the stability and accuracy of digital sensing techniques. In this paper, a method of comprehensive geometric calibration in a test field has been developed and empirically tested using eight image blocks collected with three UltraCamD digital large format photogrammetric cameras. Permanent photogrammetric test fields form the basis of the method. Important components of the method are determination of system parameters, evaluation of systematic errors, and assessment of geometric accuracy. The results showed that UltraCamD images contained systematic deformations that could not be modeled with single lens additional parameter models. Good point determination accuracy was obtained despite the systematic errors; the typical accuracy was 2–3 μm in image space in the horizontal coordinates and 0.05–0.09‰ of the object distance in height. One of the cameras had significantly poorer performance. In the worst cases, the horizontal accuracy was 5 μm in image space and the height accuracy was 0.18‰ of the object distance. The analog cameras gave better results than the UltraCamD, but the development of appropriate mathematical models for UltraCamD as well as improvements in digital sensors may change the situation in the near future.