SHRIMP zircon dating and Sm/Nd isotopic investigations of Neoproterozoic granitoids, Eastern Desert, Egypt

There is an increasing evidence for the involvement of pre-Neoproterozoic zircons in the Arabian–Nubian Shield, a Neoproterozoic crustal tract that is generally regarded to be juvenile. The source and significance of these xenocrystic zircons are not clear. In an effort to better understand this problem, older and younger granitoids from the Egyptian basement complex were analyzed for chemical composition, SHRIMP U–Pb zircon ages, and Sm–Nd isotopic compositions. Geochemically, the older granitoids are metaluminous and exhibit characteristics of I-type granites and most likely formed in a convergent margin (arc) tectonic environment. On the other hand, the younger granites are peraluminous and exhibit the characteristics of A-type granites; these are post-collisional granites. The U–Pb SHRIMP dating of zircons revealed the ages of magmatic crystallization as well as the presence of slightly older, presumably inherited zircon grains. The age determined for the older granodiorite is 652.5 ± 2.6 Ma, whereas the younger granitoids are 595–605 Ma. Xenocrystic zircons are found in most of the younger granitoid samples; the xenocrystic grains are all Neoproterozoic, but fall into three age ranges that correspond to the ages of other Eastern Desert igneous rocks, viz. 710–690, 675–650 and 635–610 Ma. The analyzed granitoids have (+3.8 to +6.5) and crystallization ages, which confirm previous indications that the Arabian–Nubian Shield is juvenile Neoproterozoic crust. These results nevertheless indicate that older Neoproterozoic crust contributed to the formation of especially the younger granite magmas.     

Integration and magnitude homogenization of the Egyptian earthquake catalogue

The aim of the present work is to compile and update a catalogue of the instrumentally recorded earthquakes in Egypt, with uniform and homogeneous source parameters as required for the analysis of seismicity and seismic hazard assessment. This in turn requires a detailed analysis and comparison of the properties of different available sources, including the distribution of events with time, the magnitude completeness, and the scaling relations between different kinds of magnitude reported by different agencies. The observational data cover the time interval 1900–2004 and an area between 22°–33.5° N and 25°–36° E. The linear regressions between various magnitude types have been evaluated for different magnitude ranges. Using the best linear relationship determined for each available pair of magnitudes, as well as those identified between the magnitudes and the seismic moment, we convert the different magnitude types into moment magnitudes M _W, through a multi-step conversion process. Analysis of the catalogue completeness, based on the M _W thus estimated, allows us to identify two different time intervals with homogeneous properties. The first one (1900–1984) appears to be complete for M _W ≥ 4.5, while the second one (1985–2004) can be considered complete for magnitudes M _W ≥ 3.     

Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

Water wars in the Middle East: a looming threat

This paper explains how hydropolitical dynamics and spatial variables almost triggered a water war between Israel and Lebanon because the latter was building a pump on the Wazzani Spring, a tributary of the Jordan River. The convergence of a regional drought, history of violent confrontations between the two riparians, distrust, varying development needs and territorial disputes almost culminated in a war between these east Mediterranean neighbours. While most international water disputes in the Middle East will be resolved peacefully, some are likely to trigger violent confrontations threatening political stability in the Middle East in the next few decades.     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Soil cracking effects on hydrological and erosive processes: a study case in Mediterranean cultivated vertisols

Shrink–swell soils, such as those in a Mediterranean climate regime, can cause changes in terms of hydrological and erosive responses because of the changing soil water storage conditions. Only a limited number of long‐term studies have focused on the impacts on both hydrological and erosive responses and their interactions in an agricultural environment. In this context, this study aims to document the dynamics of cracks, runoff and soil erosion within a small Mediterranean cultivated catchment and to quantify the influence of crack processes on the water and sediment supplied to a reservoir located at the catchment outlet using water and sediment measurements at a cultivated field outlet as baseline. Detailed monitoring of the presence of topsoil cracks was conducted within the Kamech catchment (ORE OMERE, Tunisia), and runoff and suspended sediment loads were continuously measured over a long period of time (2005–2012) at the outlets of a field (1.32 ha) and a catchment (263 ha). Analysis of the data showed that topsoil cracks were open approximately half of the year and that the rainfall regime and water table level conditions locally control the seasonal cracking dynamics. Topsoil cracks appeared to seriously affect the generation of runoff and sediment concentrations and, consequently, sediment yields, with similar dynamics observed at the field and catchment outlets. A similar time lag in the seasonality between water and sediment delivery was observed at these two scales: although the runoff rates were globally low during the presence of topsoil cracks, most sediment transport occurred during this period associated with very high sediment concentrations. This study underlines the importance of a good prediction of runoff during the presence of cracks for reservoir siltation considerations. In this context, the prediction of cracking effects on runoff and soil erosion is a key factor for the development of effective soil and water management strategies and downstream reservoir preservation. Copyright © 2016 John Wiley & Sons, Ltd.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.     

Multichannel analysis of surface waves (MASW) for seismic site characterization using 2D genetic algorithm at Bahrah area,Wadi Fatima,Saudi Arabia

The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V _{S 30} ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.     

Characterization of the Tertiary reservoir in Khabbaz Oil Field,Kirkuk area,Northern Iraq

Tertiary reservoir represented by Jeribe, Anah, Azkand, and Azkand/Ibrahim formations has been studied from reservoir characterization point of view in Khabbaz Oil Field/Northern Iraq. Examined thin sections prepared from core rock samples which are selected from the wells Kz-8 and Kz-9 revealed the existence of different microfacies in which are varies types of porosity such as interparticle, intraparticle, moldic, vuggy, and fractures have been noticed. In addition to these different types of diagenetic features are represented mainly by cementation, dolomitization, recrystallization, and dissolution. The available log data for the wells Kz-11, Kz-14, and Kz-16 have been used in characterizing the reservoir properties of the studied formations. The detected lithologies from porosity logs showed domination of limestone, dolomitic limestone, and dolomites in addition to few thin beds of anhydrites in Jeribe Formation and thin beds of sand dominated lithologies in Azkand Formation. Clay content has been calculated from gamma ray log along the studied sections and appeared to be mostly of dispersed clay type as shown from density-neutron porosity crossplot of Thomas-Stieber. Correction from the effect of clay content has been done for all the measured sonic, density, and neutron porosities. The available porosity and permeability values which are measured from core tests in the well Kz-9 for the formations of Jeribe, Anah, and Azkand have been adapted to formalize the best equation for calculating permeability in the other studied wells which have no core test measurements but only log data (Kz-11, Kz-14, and Kz-16 wells). Depending on porosity, permeability, and shale content, the studied sections have been subdivided into seven reservoir units in the wells Kz-11 and Kz-16, and for eight reservoir units in the well Kz-14.