The Glarus thrust: excursion guide and report of a field trip of the Swiss Tectonic Studies Group (Swiss Geological Society, 14.–16. 09. 2006)

This excursion guide results form a field trip to the Glarus nappe complex organized by the Swiss Tectonic Studies Group in 2006. The aim of the excursion was to discuss old and recent concepts related to the evolution of the Glarus thrust. The major aspects were (i) the interplay between deformation, fluid flow and geochemical alteration, (ii) episodic versus continuous deformation and fluid flow, and (iii) the link between large-scale structures, microstructures, and geochemical aspects. Despite 150 years of research in the Glarus nappe complex and the new results discussed during the excursion, there exist controversies that still are unsolved.     

Grain coarsening in contact metamorphic carbonates: effects of second-phase particles, fluid flow and thermal perturbations

Under contact metamorphic conditions, carbonate rocks in the direct vicinity of the Adamello pluton reflect a temperature‐induced grain coarsening. Despite this large‐scale trend, a considerable grain size scatter occurs on the outcrop‐scale indicating local influence of second‐order effects such as thermal perturbations, fluid flow and second‐phase particles. Second‐phase particles, whose sizes range from nano‐ to the micron‐scale, induce the most pronounced data scatter resulting in grain sizes too small by up to a factor of 10, compared with theoretical grain growth in a pure system. Such values are restricted to relatively impure samples consisting of up to 10 vol.% micron‐scale second‐phase particles, or to samples containing a large number of nano‐scale particles. The obtained data set suggests that the second phases induce a temperature‐controlled reduction on calcite grain growth. The mean calcite grain size can therefore be expressed in the form D = C₂ e^Q*/RT(d_p/f_p)^m*, where C₂ is a constant, Q* is an activation energy, T the temperature and m* the exponent of the ratio d_p/f_p, i.e. of the average size of the second phases divided by their volume fraction. However, more data are needed to obtain reliable values for C₂ and Q*. Besides variations in the average grain size, the presence of second‐phase particles generates crystal size distribution (CSD) shapes characterized by lognormal distributions, which differ from the Gaussian‐type distributions of the pure samples. In contrast, fluid‐enhanced grain growth does not change the shape of the CSDs, but due to enhanced transport properties, the average grain sizes increase by a factor of 2 and the variance of the distribution increases. Stable δ¹⁸O and δ¹³C isotope ratios in fluid‐affected zones only deviate slightly from the host rock values, suggesting low fluid/rock ratios. Grain growth modelling indicates that the fluid‐induced grain size variations can develop within several ka. As inferred from a combination of thermal and grain growth modelling, dykes with widths of up to 1 m have only a restricted influence on grain size deviations smaller than a factor of 1.1. To summarize, considerable grain size variations of up to one order of magnitude can locally result from second‐order effects. Such effects require special attention when comparing experimentally derived grain growth kinetics with field studies.     

Unravelling the evolution of an Alpine to post-glacially active fault in the Swiss Alps

The Gemmi fault is a prominent NW–SE striking lineament that crosses the Gemmi Pass in the central Swiss Alps. A multidisciplinary investigation of this structure that included geological mapping, joint profiling, cathodoluminescence and scanning electron microscopy, stable isotope measurements, luminescence- and U-TH-dating, 3D ground penetrating radar (GPR) surveying and trenching reveals a history of fault movements from the Miocene to the Holocene. The main fault zone comprises a 0.5–3 m thick calcite cataclasite formed during several cycles of veining and brittle deformation. Displaced Cretaceous rock layers show an apparent dextral slip of 10 m along the fault.A detailed study of a small sediment-filled depression that crosses the fault provides evidence for a post-glacial reactivation of the fault. A trench excavated across the fault exposed a Late-Glacial-age loess layer and late Holocene colluvial-like slope-wash deposits that showed evidence for fault displacement of a few centimeters, indicating a recent strike-slip reactivation of the fault. Focal mechanisms of recent instrumentally recorded earthquakes are consistent with our findings that show that the fault at the Gemmi Pass, together with other parallel faults in this area, may be reactivated in today's stress field. Taking together all the observations of its ancient and recent activity, the Gemmi fault can be viewed as a window through geological space and time.     

Kinematics and significance of a poly-deformed crustal-scale shear zone in central to south-eastern Madagascar: the Itremo–Ikalamavony thrust

International Journal of Earth Sciences - Across the crystalline basement of Madagascar, late Archaean rocks of the Antananarivo Block are tectonically overlain by Proterozoic, predominantly...     

Quartz as indicator mineral in the Central Swiss Alps: the quartz recrystallization isograd in the rock series of the northern Aar massif

Earlier observations on the deformation of rock-forming quartz during Alpine metamorphism that were made by Voll (1976) along a traverse following the Reuss valley (Aar massif, Central Swiss Alps) are still relevant but can be explained in more modern term. Voll found that a few kilometres south of the contact between the Aar massif and its sedimentary cover quartz has partly undergone a combination of dynamic recrystallization and nucleation along grain boundaries and fractures at the expense of the deformed parent grains. Further to the south, increasing grain growth of quartz under nearly static conditions is observed, with polygonal grain shapes typical of annealed microfabrics. Comparable stages of recrystallization could be found in several N–S traverses through the Aar massif so that “points of first occurrence” of newly formed quartz could be connected to define a quartz recrystallization isograd. This isograd extents over 90 km through the northern Aar massif, following a course parallel to the sanidine/microcline isograd but at a distance of 10–15 km further to the north. The evolution of the quartz microfabric is discussed with respect to recent estimates of the T-t path of the Aar massif.     

The effect of dissolved magnesium on creep of calcite II: transition from diffusion creep to dislocation creep

We extended a previous study on the influence of Mg solute impurity on diffusion creep in calcite to include deformation under a broader range of stress conditions and over a wider range of Mg contents. Synthetic marbles were produced by hot isostatic pressing (HIP) mixtures of calcite and dolomite powders for different intervals (2–30 h) at 850°C and 300 MPa confining pressure. The HIP treatment resulted in high-magnesian calcite aggregates with Mg content ranging from 0.5 to 17 mol%. Both back-scattered electron images and chemical analysis suggested that the dolomite phase was completely dissolved, and that Mg distribution was homogeneous throughout the samples at the scale of about two micrometers. The grain size after HIP varied from 8 to 31 μm, increased with time at temperature, and decreased with increasing Mg content (>3.0 mol%). Grain size and time were consistent with a normal grain growth equation, with exponents from 2.4 to 4.7, for samples containing 0.5–17.0 mol% Mg, respectively. We deformed samples after HIP at the same confining pressure with differential stresses between 20 and 200 MPa using either constant strain rate or stepping intervals of loading at constant stresses in a Paterson gas-medium deformation apparatus. The deformation tests took place at between 700 and 800°C and at strain rates between 10⁻⁶ and 10⁻³ s⁻¹. After deformation to strains of about 25%, a bimodal distribution of large protoblasts and small recrystallized neoblasts coexisted in some samples loaded at higher stresses. The deformation data indicated a transition in mechanism from diffusion creep to dislocation creep. At stresses below 40 MPa, the strength was directly proportional to grain size and decreased with increasing Mg content due to the reductions in grain size. At about 40 MPa, the sensitivity of log strain rate to log stress, (n), became greater than 1 and eventually exceeded 3 for stresses above 80 MPa. At a given strain rate and temperature, the stress at which that transition occurred was larger for samples with higher Mg content and smaller grain size. At given strain rates, constant temperature, and fixed grain size, the strength of calcite in the dislocation creep regime increased with solute content, while the strength in the diffusion creep regime was independent of Mg content. The results suggest that chemical composition will be an important element to consider when solid substitution can occur during natural deformation.     

Microstructures of coarse-grained marbles,analyzed using a new technique based on the bireflectance of calcite

A new approach to quantify microstructures of coarse-grained marbles is presented. This technique is based on the intensity of light reflectance in dependence of the crystallographic orientation of calcite grains. The technique setup consists of a high-resolution camera, a strong light source and the polished sample in reflection position. Microstructural data obtained with this method are comparable with those obtained by light microscopy or by secondary electron microscopy. However, the new approach reflects the grain size distribution even more accurately than in the case of other techniques, because it allows an easy quantification of larger sample surfaces. Therefore, in contrast to established techniques, microstructural analysis and statistics can also be performed for coarse-grained samples with grains that exceed diameters of 1 cm. With this new technique, coarse-grained mylonitic microstructures from Naxos were quantified, which in turn allowed relating different microfabrics to different strain localization episodes within a large-scale shear zone complex.     

The effect of different second-phase particle regimes on grain growth in two-phase aggregates: insights from in situ rock analogue experiments

The aim of the study was to investigate the effect of rigid second phases on grain growth of a matrix phase. For this purpose, variable mixtures of norcamphor as the matrix phase, with glass beads (0.08–0.51 volume fraction) as second phase, were used to perform see-through rock-analogue experiments under static conditions at constant temperatures (50°C). Irrespective of the second-phase content, grain-size evolution of all mixtures can be subdivided into a stage of continuous grain growth, a transient stage and a stage of a finally stabilized grain size. On the grain-scale, the second phases affect the migrating grain boundaries either by pinning by single particles, by multiple particles or even by particle clusters. Summed up over the entire aggregate, these pinning regimes affect the average bulk grain size of the matrix grains, such that the changes in matrix grain size directly correlate with the amount of second phases, their dispersion and their degree of clustering. In this way, the matrix grain size decreases with increasing second-phase content, which can be expressed as a Zener relationship. Originating from the modification of an ordinary grain growth law, a new mathematical expression is defined, which allows the calculation of changes in the matrix grain size as a function of different second-phase volume fractions and particle sizes. Such models will be helpful in the future to predict microstructural changes in polymineralic rocks at depth.     

Grain coarsening in polymineralic contact metamorphic carbonate rocks: The role of different physical interactions during coarsening

The microstructural evolution of polymineralic contact metamorphic calcite marbles (Adamello contact aureole) with variable volume fractions of second-phase minerals were quantitatively analyzed in terms of changes in grain size and nearest neighbor relations, as well as the volume fractions, dispersion and occurrences of the second phases as a function of changing metamorphic conditions. In all samples, the calcite grain size is controlled by pinning of grain boundaries by second phases, which can be expressed by the Zener parameter (Z), i.e., the ratio between size and volume fraction of the second phases. With increasing peak metamorphic temperature, both the sizes of matrix grains and second phases increase in dependence on the second-phase volume fraction. Two distinct coarsening trends are revealed: trend I with coupled grain coarsening limited by the growth of the second phases is either characterized by large-sized or a large number of closely spaced-second phase particles, and results finally in a dramatic increase in the calcite grain size with Z. Trend II is manifest by matrix controlled grain growth, which is retarded by the presence of single second-phase particles that are located on calcite grain boundaries. It is supported by grain boundary pinning induced by triple junctions, and the calcite grain size increases moderately with Z. The two different grain coarsening trends manifest the transition between relatively pure polymineralic aggregates (trend II) and microstructures with considerable second-phase volume fractions of up to 0.5. The variations might be of general validity for any polymineralic rock, which undergoes grain coarsening during metamorphism. The new findings are important for a better understanding of the initiation of strain localization based on the activation of grain size dependent deformation mechanisms.