High-sensitive measurement of uranium LIII-edge X-ray absorption near-edge structure (XANES) for the determination of the oxidation states of uranium in crustal materials

The uranium L_III-edge XANES spectra for natural rocks at the concentration range of 0.96–124 mg kg⁻¹ were measured using a log spiral bent crystal Laue analyzer (BCLA) combined with a multi-element Ge detector. It was found that the quality of the XANES spectra using the BCLA was greatly improved due to a reduction of interfering fluorescence from major components such as Rb and Sr. The ratio of signal to background intensities in the U L_III-edge XANES spectra increased by a factor of 2.9–17 with the use of the BCLA, which greatly enhanced the detection limit for the speciation of the oxidation states of U or the U(IV)/U(VI) ratio of natural samples. In addition, it was demonstrated that the fluorescence XANES method coupled with the BCLA enable determination of the speciation of U for various natural samples such as acidic igneous rocks, ferromanganese nodules, sediments, and some sedimentary rocks such as shale and limestone.     

Mercury distribution in seawater in Minamata Bay and the origin of particulate mercury

Horizontal and vertical distributions of mercury were determined in seawater in Minamata Bay and Yatsushiro Sea. The concentrations of total and particulate mercury respectively ranged from 56–285 ng l^–1 and 2.1–506 ng l^–1. They were both highest in the inner most part of Minamata Bay where the sediment was most heavily polluted, and decreased with increasing distance from there. Vertically, an evident increase in concentration was observed near the bottom. A good agreement was found between the mercury content in suspended matter and that in fine sediment particles.These facts show that the particulate mercury is supplied mostly from the bottom sediment, and that it is spreading offshore with dispersing in seawater. This process would eventually result in the pollution of sediment in Yatsushiro Sea.     

Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

Degradation of lubricating oils by marine bacteria observed by quantitative mass spectrometry

Bacterial degradation of the hydrocarbons of lubricating oils was investigated by mass spectrometric analysis which gives both total amount and the composition of hydrocarbon types of residual oil. An unused lubricating oil, which mainly consisted of hydrocarbon types with only a small percentage ofn-alkanes, was degraded by marineBacillus sp. andPseudomonas sp. with 55 % and 25 % decreases in 10 days, respectively. Susceptibility of respective hydrocarbon types to biodegradation was in the following order: alkanes > non-condensed cycloalkanes, mono-aromatics > condensed cycloalkanes. A used lubricating oil of different brand showed a larger decrease than the unused oil. Both species of bacteria degraded large portions of alkane fraction of Arabian light crude oil.     

Wave-induced porewater pressure in a seabed with inhomogeneous permeability

We have developed an analytical treatment for the wave-induced response of a seabed with inhomogeneous permeability, by employing the boundary layer approximation. By assuming an exponential function for vertically distributed permeability, the inhomogeneous consolidation equation was formulated as Bessel's differential equation. Subsequently, we proposed some representative quantities for examining the effects of inhomogeneity of permeability. The main effects of inhomogeneity are that the boundary layer becomes thinner and the phase delay in the direction of depth becomes larger as the inhomogeneity becomes significant. In addition, it was shown that the boundary layer is properly evaluated by using the averaged permeability.     

波流共存场中多向随机波浪传播变形数学模型

基于波作用量守恒方程建立了波流共存场中多向随机波浪传播变形数学模型,模型中考虑了波浪绕射的影响和水流引起的波浪弥散多普勒效应,应用包含水流和地形影响的激破波模式计算波浪破碎的能量耗散,采用一阶上迎风有限差分格式离散控制方程。分别计算了有无近岸流情况下单向和多向随机波浪的波高分布,考虑水流影响的数值计算结果与物理模型实验数据吻合良好,比较分析表明,所建立的数学模型能够复演由于离岸流引起的波高增大,可用于波流共存场多向随机波浪传播变形的模拟和预报。     

Hydration and refractive indices of Holocene tephra glass in Hokkaido, Northern Japan

Refractive indices of incompletely hydrated tephra glasses vary widely. Thus, glass refractive index is not a practical indicator for identifying Holocene tephras. Hydration near the surface of tephra glass shards can be removed by either hydrofluoric acid treatment or annealing for 12 h at 400°C. The annealing procedure is a particularly reliable and simple way to dehydrate tephra glasses. Standard deviations (s) of refractive indices for glasses after 12 h annealing are small (s=0.0014–0.0018), in contrast with untreated glasses (s=0.0034–0.0405). The refractive indices of dehydrated tephra glasses are 0.006–0.014 lower than those of the untreated (hydrated) glasses. Using the 400°C 12-h annealing procedure, values for the refractive indices of eight Holocene tephras in Hokkaido were obtained. These refractive indices are useful indicators for identification and correlation of Holocene tephras.     

The phytoplankton of some saline lakes in Central Asia

The Aral Sea, Lake Balkhash, and Lake Kamyslybas are closed lakes in Central Asia. They range from oligosaline to metasaline. The salinity of the Aral Sea has increased by more than 30 g L⁻¹ since widespread irrigation began in its catchment area. Few studies of the phytoplankton have been conducted on these lakes since extensive irrigation started. The investigation reported here compares the flora of phytoplankton in these saline lakes. In the Small Aral Sea, phytoplankton density gradually decreased with increasing electrical conductivity (EC) (∼ salinity), but there was no such relation in Lake Balkhash and Lake Kamyslybas. In the Aral Sea, Dinophyceae and Bacillariophyceae were frequently observed in most areas of high EC value, and Cyanophyceae were most conspicuous in the area of medium and lower EC values. In Lake Balkhash, Cyanophyceae were most conspicuous, but Chlorophyceae were also noticeable. Most Cyanophyceae in Aral Sea formed filaments with heterocysts. The distinct characteristic of the phytoplankton of the Lake Balkhash was that all dominant species form colonies covered with a gelatinous film. Siliceousplankton diversity gradually decreased with increasing EC values in the Aral Sea and Lake Balkhash.     

Soil-structure interaction analysis of the Hualien containment model

This paper presents results from forced vibration tests, microtremor observations and earthquake response analysis of a nuclear reactor containment model constructed on stiff soil in Hualien, Taiwan. The dynamic behavior of the soil-structure system is simulated successfully with two numerical models: a sway-rocking model, whose soil parameters are evaluated on the basis of the continuum formulation method, and a finite element model, using the program SASSI with the flexible volume substructuring approach. The dependences of the soil parameters of both models on the amplitudes of the different dynamic excitations are investigated in detail. An original numerical simulation of microtremor is performed. Comparison with results of a previous study involving a rigid tower on a soft soil site in Chiba, Japan is offered.     

Earthquake swarms preceding the 2000 eruption of Miyakejima volcano, Japan

The first sign of magma accumulating beneath Miyakejima, an island volcano in the northern Izu islands, Japan, came at around 18:00 on 26 June 2000, when a swarm of earthquakes was detected by a volcano seismic network on the island. Earthquakes occurred initially beneath the southwest flank near the summit and gradually migrated west of the island, where a submarine eruption occurred the next morning. Earthquakes then migrated further to the northwest between Miyakejima and Kozushima, another volcanic island and developed to the most intense earthquake swarm ever observed in and around Japanese archipelago. To better image how the initial magma intrusion occurred, we relocated hypocenters by using a station-correction method and a double-difference method. The relocated epicenters are generally concentrated near the upper bound of dyke intrusions inferred from geodetic studies throughout the initial stages of the 2000 eruption at Miyakejima from 26 to 27 June 2000. As for seismic activity westward off Miyakejima in the morning on 27 June, hypocenters from both a nationwide seismic network that were relocated by the double-difference method, and those from the volcano seismic network relocated by the station-correction method, formed a very shallow cluster that ascended slowly with time as it propagated northwestward from Miyakejima. This suggests that the dykes have both a radial and upward component of movement.Editorial responsibility: S. Nakada, T. Druitt