Properties of geogrid-reinforced marine slope due to the groundwater level changes

Evaluation of slope stability, especially in the absence of a proper bed such as marine soils, is one of the most important issues in geotechnical engineering. Using geogrid layers to enhance the strength and stability of embankments is regarded as a commendable stabilization method. On the other hand, groundwater level erratically fluctuates in coastal areas. Therefore, the aim of this research is to study the effects of groundwater level changes on stability of a geogrid-reinforced slope on loose marine soils in Qeshm Island, Iran. At first, geotechnical properties of the site were obtained by comprehensive series of geotechnical laboratory and in situ tests. Then, by simultaneous changes of groundwater level and several parameters such as embankment slope, loading, geogrid length, geogrid number, and tensile strength of geogrid, different characteristics such as embankment safety factor (SF), vertical and horizontal displacements at embankment top and embankment base were studied. It was observed that groundwater level had significant effects on behavior of the embankment. For most of the observations, by decreasing the groundwater level, the displacements decreased and consequently safety factor increased. Increasing the length, number, and tensile strength of geogrid led to the reduction of displacements and an increase in the safety factor.     

Adsorption of BTEX on Surfactant Modified Granulated Natural Zeolite Nanoparticles: Parameters Optimizing by Applying Taguchi Experimental Design Method

In this paper, a novel adsorbent developed by means of granulating of natural zeolite nanoparticles (i.e., clinoptilolite) was evaluated for possible removal of the petroleum monoaromatics (i.e., benzene, toluene, ethylbenzene, and xylene, BTEX). To do this, the natural zeolite was ground to produce nanosized particulate, then modified by two cationic surfactants and granulated. The effect of various parameters including temperature, initial pH of the solution, total dissolved solids (TDS), and concentration of a competitive substance (i.e., methyl tert‐butyl ether, MTBE) were studied and optimized using a Taguchi statistical approach. The results ascertained that initial pH of the solution was the most effective parameter. However, the low pH (acidic) was favorable for BTEX adsorption onto the developed adsorbents. In this study, the experimental parameters were optimized and the best adsorption condition by determination of effective factors was chosen. Based on the S/N ratio, the optimized conditions for BTEX removal were temperature of 40°C, initial pH of 3, TDS of 0 mg/L, and MTBE concentration of 100 µg/L. At the optimized conditions, the uptake of each BTEX compounds reached to more than 1.5 mg/g of adsorbents.     

Impact of major organophosphate pesticides used in agriculture to surface water and sediment quality (Southern Caspian Sea basin,Haraz River)

Organophosphate pesticides are compounds that are not only toxic to both humans and wildlife but also difficult to degrade under natural environmental conditions. In Iran, agricultural practices are strongly dependent on the use of pesticides due to climatic and soil conditions, thus posing a potential risk to groundwater quality standards. Evaluating the concentration of organophosphate pesticides namely diazinon, fenitrothion, dichlorvos, ethion, profenofos, malathion and azinphos methyl in water samples in May (low precipitation rate), December (high precipitation rate) as well as the concentration in sediments along the Haraz River is taken into consideration in this study. Generally the pesticides concentration in water samples are relatively higher in May in comparison with that in December; this fact may be due to two major reasons: the first reason is attributed to the prompt raining after the treatment period of most orchards and dry farming lands that will terminate in more wash out of such pesticides towards the branches and main river channel, while the second reason may be considered as the less river water dilution rate in May because of lower precipitation rate. Furthermore, the relatively higher concentrations in downstream stations may be contributed to more intensified agricultural (specially rice paddies), urban and rural land uses in this region in comparison with upstream areas which contain mainly dry farming, grazing lands and orchards with relatively lower loads of pesticides. Additionally, as the Henry’s law constant of all pesticides considered in this study are relatively low, volatilization may not be regarded as an important route of dissipation. Diazinon, azinphos methyl and dichlorvos showed the highest water concentrations in comparison with other pesticides that may be justified by their extended use within the basin during last decades. Based on the chemical properties as well as remarkably higher values in sediment samples in comparison with water ones, it is concluded that the two pesticides, ethion and fenitrothion, persist in the environment due to non-degradable tendencies. Although the concentration of mentioned pesticides is not so high in the water samples, more precautions must be considered in their future use. Regarding the sorption coefficient variation alongside the river, the higher values in upstream and central parts may be attributed to the higher potential of different types of erosion regarding deeper slopes and also sand, gravel and carbonate mining activities at the banks and also river bed in such regions which is considered as an anthropogenic disturbance. In case of central parts, in addition to mentioned reasons, the existence of coal outcrops in the geologic texture of the study area may also be considered as a key role in augmentation of the sorption coefficient. Finally, the dominant clayey and loamy soils containing more organics may be attributed as the major reason of sorption tendency in downstream.     

Mass loss of the Greenland ice sheet from GRACE time-variable gravity measurements

The Gravity Recovery and Climate Experiment (GRACE) satellite data is used to estimate the rate of ice mass variability over Greenland. To do this, monthly GRACE level 2 Release-04 (RL04) data from three different processing centers, Center for Space Research (CSR), German Research Center for Geosciences (GFZ) and Jet Propulsion Laboratories (JPL) were used during the period April 2002 to February 2010. It should be noted that some months are missing for all three data sets. Results of computations provide a mass decrease of −163 ± 20 Gigaton per year (Gt/yr) based on CSR-RL04 data, −161 ± 21 Gt/yr based on GFZ-RL04 data and −84 ± 26 Gt/yr based on JPL RL04.1. The results are derived by the application of a non-isotropic filter whose degree of smoothing corresponds to a Gaussian filter with a radius of 340 km. Striping effects in the GRACE data, C₂₀ effect, and leakage effects are taken into the consideration in the computations. There is some significant spread of the results among different processing centers of GRACE solutions; however, estimates achieved in this study are in agreement with the results obtained from alternative GRACE solutions.     

Studying Hygienic Status of Mechanized Long Wall Face from the Perspective of the Existing Dust Containing Silica in Tabas Coal Mine

In order to consider the quantity of the existing negative effect in mechanized longwall mining face in Tabas coal mine, the concentration of the available coal dust and amount of its toxicity in every part of the mining face and tail gate were investigated and compared with the permissible amount. After sampling and preparing dust, its concentration was determined by gravimetric method. Then, using Zetasizer, the particle size distributions were determined and also the available amount of silica in the samples was found using SEM and XRF device. The results of the elemental analysis of dust in the mine showed that the weight percentage of silica in dust was between 27.9 and 26.7 %. The correction of the permissible dust concentration from the perspective of silica was done and the result was reported as 0.36 mg/m³. Computational fluid dynamics can be used to determine dust accumulation zones and the zones with high dust concentration. Finally, D₅₀ of the samples showed that the existing toxicity in dust can be transferred to dozens of meters far from the source (shearer).     

Climatology of dust days in the Central Plateau of Iran

Natural Hazards - Dust storms are a major natural hazard to human health. Severe erosive storms in parts of the Central Plateau of Iran have made the situation very difficult for the inhabitants,...     

Thermal comfort and forecast of energy consumption in Northwest Iran

Assessing the climatic characteristics and identifying the climatic parameters of a specific region can play a major role in human welfare. Thermal comfort conditions are among the most significant factors of climatic variables in the northwestern regions of Iran due to the considerable spatial and temporal variations and are vital for environmental, energy and economic management. It is therefore necessary to advance our knowledge of the climatic conditions in order to provide an appropriate tool for managing climatic extremes. This requires charting of the range of clusters of the thermal comfort conditions in this region. In this study, the general atmosphere circulation model HADCM3 and the A1 scenario, downscaled by the LARS-WG model, were employed to simulate the climatic conditions in Iran during the period 2011–2040. The data obtained were compared with sampled data from six Iranian climatic stations for the 30-year period (1961–1990). In order to tabulate this comparison, six clusters per climatic station were defined based on intrinsic similarity of data. Results show an increase in the annual average temperature of these six stations by 1.69 °C for the predicted years, projected from the base years 1961–1990. This factor has resulted in an increment of the annual average thermal comfort temperature inside buildings by a magnitude of 0.52 °C in future decades. When the thermal requirements of the studied region were evaluated based on the real temperature difference and the degree of thermal comfort, it becomes clear that apart from cluster 1, the energy required to reach thermal comfort inside buildings will increase in the future. As a result of this temperature increase, an increase of the energy required to reach the thermal comfort is expected. This new methodology is an interesting tool and needs to be seriously considered by engineers and architects in designing buildings of the future.