New evidence on the hydrothermal system in Long Valley caldera, California, from wells, fluid sampling, electrical geophysics, and age determinations of hot-spring deposits

Data collected since 1985 from test drilling, fluid sampling, and geologic and geophysical investigations provide a clearer definition of the hydrothermal system in Long Valley caldera than was previously available. This information confirms the existence of high-temperature (> 200°C) reservoirs within the volcanic fill in parts of the west moat. These reservoirs contain fluids which are chemically similar to thermal fluids encountered in the central and eastern parts of the caldera. The roots of the present-day hydrothermal system (the source reservoir, principal zones of upflow, and the magmatic heat source) most likely occur within metamorphic basement rocks beneath the western part of the caldera. Geothermometer-temperature estimates for the source reservoir range from 214 to 248°C. Zones of upflow of hot water could exist beneath the plateau of moat rhyolite located west of the resurgent dome or beneath Mammoth Mountain. Lateral flow of thermal water away from such upflow zones through reservoirs in the Bishop Tuff and early rhyolite accounts for temperature reversals encountered in most existing wells. Dating of hot-spring deposits from active and inactive thermal areas confirms previous interpretations of the evolution of hydrothermal activity that suggest two periods of extensive hot-spring discharge, one peaking about 300 ka and another extending from about 40 ka to the present. The onset of hydrothermal activity around 40 ka coincides with the initiation of rhyolitic volcanism along the Mono-Inyo Craters volcanic chain that extends beneath the caldera's west moat.     

Partitioning of manganese,iron, copper,zinc, lead,cobalt, and nickel in black coatings on stream boulders in the vicinity of the Magruder mine,Lincoln Co., Georgia

Sequential digestions of Fe-Mn oxide coated boulders collected upstream and downstream from the Magruder mine, Lincoln Co., Georgia, indicate probable partitioning relationships for Zn, Cu, Pb, Co, and Ni with respect to Mn and Fe. Initial digestion with 0.1M hydroxylamine hydrochloride (Hxl) in 0.01M HNO₃ selectively dissolyes Mn oxides, whereas subsequent digestion with 1:4 HCl dissolves remaining Fe oxides.The results indicate that partitioning is not constant, but varies systematically with respect to the location of metal-rich waters derived from sulfide mineralization. Upstream from the mineralized zone Zn and Ni are distinctly partitioned to the Fe oxide component and Co and Cu are partitioned to the Mn oxide component. Immediately downstream from the mineralized zone, Mn oxides become relatively more enriched in Zn, whereas Fe oxides are relatively more enriched in Cu, Co, and Ni. Analytical precision for Pb is poor, but available data suggests it is more closely associated with Fe oxides.For routine geochemical surveys utilizing coated surfaces, a one-step digestion method is probably adequate. Parameters useful for detecting sulfide mineralization are metal concentrations normalized to surface area or various ratios (e.g. Zn/(Mn + Fe), Cu/Mn, Pb/Fe). Ratios can be obtained much faster, and at lower analytical costs than conventional analysis of stream sediment.     

Biofouling confounds the uptake of trace organic contaminants by semi-permeable membrane devices (SPMDs)

The outer layers of layflat, low density polyethylene plastic tubing (the principal component of semi-permeable membrane devices, SPMDs) were biofouled at a clean site in Hong Kong coastal waters for periods of 1–4 weeks. Following pre-fouling, triolein was added to the SPMDs and, along with control (unfouled) devices, they were exposed to a range of organochlorine pesticides (-HCH, aldrin, p,p^′-DDT) and PAHs (anthracene, fluoranthene and benzo(a)pyrene) under laboratory conditions. Results showed that the uptake of contaminants by SPMDs was severely reduced by as much as 50% under fouling conditions in comparison to unfouled controls. The ultimate utility of SPMDs as passive monitors is thus reduced, although alternative measures, such as the use of permeability reference compounds may compensate, and allow for realistic evaluations of dissolved environmental concentrations in aquatic environments. However, due to the complexities involved in such procedures––especially as they need to be conducted on a case-by-case basis––the utility of SPMDs appears to be limited for estimates of bioavailability unless necessary calibrations are undertaken within each environment that the sampler is used.     

Comparison of 15 evaporation methods applied to a small mountain lake in the northeastern USA

Few detailed evaporation studies exist for small lakes or reservoirs in mountainous settings. A detailed evaporation study was conducted at Mirror Lake, a 0.15 km² lake in New Hampshire, northeastern USA, as part of a long-term investigation of lake hydrology. Evaporation was determined using 14 alternate evaporation methods during six open-water seasons and compared with values from the Bowen-ratio energy-budget (BREB) method, considered the standard. Values from the Priestley–Taylor, deBruin–Keijman, and Penman methods compared most favorably with BREB-determined values. Differences from BREB values averaged 0.19, 0.27, and 0.20 mm d⁻¹, respectively, and results were within 20% of BREB values during more than 90% of the 37 monthly comparison periods. All three methods require measurement of net radiation, air temperature, change in heat stored in the lake, and vapor pressure, making them relatively data intensive. Several of the methods had substantial bias when compared with BREB values and were subsequently modified to eliminate bias. Methods that rely only on measurement of air temperature, or air temperature and solar radiation, were relatively cost-effective options for measuring evaporation at this small New England lake, outperforming some methods that require measurement of a greater number of variables. It is likely that the atmosphere above Mirror Lake was affected by occasional formation of separation eddies on the lee side of nearby high terrain, although those influences do not appear to be significant to measured evaporation from the lake when averaged over monthly periods.     

The effect of cracks on the thermal expansion of rocks

Thermal expansion during the first heating cycle at atmospheric pressure was measured in several directions in seven igneous rocks between 25° and 400°C at slow heating rates. The coefficient of thermal expansion measured under these conditions increases more rapidly as temperature is increased than the average thermal expansion coefficient of the constituent minerals. The “extra” expansion is attributed to the formation of cracks by differential expansion of mineral grains. The presence of such cracks in the rocks during the cooling part of the cycle and during any subsequent heating and cooling cycles will result in a substantial decrease in the coefficient of thermal expansion as compared to that measured during the first heating cycles. The effect of cracks initially present in a rock was studied by measuring the full tensor of the coefficient of thermal expansion on two rocks with anisotropic crack distributions. In these two rocks the coefficient of thermal expansion is least in the direction perpendicular to the plane of greatest crack concentration. The implication of our data is that thermal expansion depends greatly on the fracture state of the rock. Both the fractures in the rock and the boundary conditions on the rock are significant for the interpretation of thermal expansion measurements and for their application to other problems.     

Armalcolite stability as a function of pressure and oxygen fugacity

The stability of synthetic armalcolite of composition (Fe_0.5Mg_0.5Ti₂O₅ was studied as a function of total pressure up to 15 kbar and 1200°C and also as a function of oxygen fugacity (?O₂) at 1200°C and 1 atm total pressure. The high pressure experiments were carried out in a piston-cylinder apparatus using silver-palladium containers. At 1200°C, armalcolite is stable as a single phase at 10 kbar. With increasing pressure, it breaks down ($\text{dT}\text{dP}\text{= 20°C/}\text{kbar}$), to rutile, a more magnesian armalcolite, and ilmenite solid solution. At 14 kbar, this three-phase assemblage gives way ($\text{dT}\text{dP}\text{= 30°C/}\text{kbar}$) to a two-phase assemblage of rutile plus ilmenite solid solution.A zirconian-armalcolite was synthesized and analyzed; 4 wt % ZrO₂ appears to saturate armalcolite at 1200°C and 1 atm. The breakdown of Zr-armalcolite occurs at pressures of 1–2 kbar less than those required for the breakdown of Zr-free armalcolite. The zirconium partitions approximately equally between rutile and ilmenite phases.The stability of armalcolite as a function of ?O₂ was determined thermogravimetrically at 1200°C and 1 atm by weighing sintered pellets in a controlled atmosphere furnace. Armalcolite, (Fe_0.5Mg_0.5)-Ti₂O₅, is stable over a range ?O₂ from about 10^?9.5to 10^?10.5 atm. Below this range to at least 10^?12.8 atm, ilmenite plus a reduced armalcolite are formed. These products were observed optically and by Mössbauer spectroscopy, and no metallic iron was detected; therefore, some of the titanium must have been reduced to Ti³⁺. This reduction may provide yet another mechanism to explain the common association of ilmenite rims around lunar armalcolites.     

一次春季强寒潮的降水相态变化分析

应用NCEP 1°×1°资料、常规观测资料、自动站资料、多普勒天气雷达资料,对2007年3月河北省一次早春强寒潮天气背景下的降水多相态转换的成因与雨雪转换的预报进行了分析.结果表明:850hPa及以下蒙古高压和江淮气旋共同作用产生的偏东风导致低层大气温度持续下降,降水性质从雨转为雪.随着江淮气旋入海,高低空风向发生突变,从东北风转为西北风,加上太行山地形作用,使太行山东麓部分地区低层大气出现小幅升温,0℃层高度抬升,致使从雪转为雨.多普勒天气雷达回波图上,0℃层亮带高度的迅速下降,可作为从液态降水向固态降水转换的判据之一.天气学分析表明,当0℃层高度低于950hPa、地面气温在0℃上下、1000hPa温度低于2℃、925hPa温度低于-2℃时,降水性质将从雨向雨夹雪或雪转变.     

Modeling the sediment yield from landslides in the Shihmen Reservoir watershed,Taiwan

Landslides generate enormous volumes of sediment in mountainous watersheds; however, quantifying the downstream transport of landslide‐derived sediment remains a challenge. Landslide erosion and sediment delivery to the Shihmen Reservoir watershed in Taiwan was estimated using empirical landslide frequency–area and volume–area relationships, empirical landslide runout models, and the Hydrological Simulation Program‐ FORTRAN (HSPF). Landslide erosion rates ranged from 0.4 mm yr^‐1 to 2.2 mm yr^‐1 during the period 1986–2003, but increased to 7.9 mm yr^‐1 following Typhoon Aere in 2004. The percentage of landslide sediment delivered to streams decreased from 78% during the period 1986–1997 to 55% in 2004. Although the delivery ratio was lower, the volume of landslide sediment delivered to streams was 2.81 × 10⁶ Mg yr^‐1 in 1986–1997 and 8.60 × 10⁶ Mg yr^‐1 in 2004. Model simulations indicate that only a small proportion of the landslide material was delivered downstream. An average of 13% of the landslide material delivered to rivers was moved downstream during the period 1986–1997. In 2004, the period including Typhoon Aere, the annual fluvial sediment yield accounted for approximately 23% of the landslide material delivered to streams. In general, the transfer of sediment in the fluvial system in the Shihmen Reservoir watershed is dominantly transport limited. The imbalance between sediment supply and transport capacity has resulted in a considerable quantity of landslide material remaining in the upper‐stream regions of the watershed. Copyright © 2012 John Wiley & Sons, Ltd.     

Statewide groundwater‐vulnerability assessment in nebraska using the drastic/GIS model

The paper summarizes a technique for implementing the “DRASTIC” groundwater‐vulnerability model within the context of an automated raster‐based geographic information system. Discussion focuses on a methodological development and a statewide project completed recently in Nebraska. The final products, a comprehensive flow chart illustrating procedures and a map of calculated potential pollution hazard, are presented. The methodology can be executed successfully with minimal training and experience. Areas of Nebraska considered vulnerable to groundwater pollution are identified.