Mechanisms of coal metamorphism: case studies from Paleozoic coalfields

Controls on coal metamorphism can be complex. In this paper, we examine four Paleozoic coalfields: the western Kentucky portion of the Illinois Basin, the Pennsylvania anthracite fields, the South Wales Coalfield, and the Bowen Basin. An increase in temperature with depth of burial is certainly a factor in coal metamorphism. In many coalfields, however, including the coalfields reviewed here, it has become apparent that such a simple mechanism does not explain the coal rank patterns observed. The flow of hydrothermal fluids through the coals has been proposed as a cause of coal metamorphism. Evidence includes inverted rank gradients, elevated CFL as an indicator of brine fluids, isotopic evidence for hydrothermal fluids, and vein and cleat mineral assemblages. In any case, multiple hypotheses must often be evaluated in the examination of any coalfield since the simple paradigm of coal rank increases with a simple increase in temperature with increasing depth does not fit the evidence observed in many cases.     

Strike-slip fault bridge fluid pumping mechanism: insights from field-based palaeostress analysis and numerical modelling

We present a finite-element study of stress perturbation in evolving compressive and extensional strike-slip fault bridges. The results are compared with a fracture study of a compressive bridge at St Donats, UK. Horizontally interbedded calcareous mudstone and bioclastic calcilutite at St Donats have a distinct vertical permeability anisotropy. This sedimentary sequence behaves as a set of horizontal aquifers. The fluid flow in these aquifers is sensitive to mean stress gradients. Paleostress analysis of field fracture data, verified by finite-element modelling, indicates a rotation of σ₁ towards parallelism with boundary faults inside the growing compressive bridge. Boundary faults and bridge faults recorded numerous fluid flow events. The modelled mean stress pattern shows a regional maximum within the bridge and local maxima/minima pairs at boundary fault tips.Finite-element modelling of an extensional bridge indicates that σ₃ rotates towards parallelism with boundary faults. The mean stress pattern is similar to the pattern in compressive bridge but with maxima and minima locations interchanged. The stress patterns are reestablished by each stress build-up preceding the rupturation of the boundary faults throughout the development stages of strike-slip fault bridges. Mean stress gradients developed pre-failure control the fluid flow in fractures of the strike-slip fault system at and after the end of each stress build-up and the fluid flow in boundary faults post-failure. Fracture reactivation and new fracture generation within an evolving bridge is a process consisting of multiple successive events that retain the storage capacity of the bridge. Rupture and sealing of the main bounding-faults is a step-wise process that opens and closes fluid conduits between areas with different pressures.     

The impact of tectonic deformation upon coal seams in the South Wales coalfield, UK

Observations on the nature and appearance of coal seams, which were deformed during the late Carboniferous Variscan orogeny, have been made over several years within a number of opencast coal sites located across the South Wales coalfield. The deformation of coal seams was dominated by brittle failure and subsequent movement along fracture planes. Examination of hand specimens and smaller-scale samples using a scanning electron microscope reveals the presence of two distinct types of small-scale, tectonic fracture markings within deformed coals. Striated fracture surfaces with prominent ridges and grooves can bear a superficial resemblance to shatter cones in appearance but are unique to coal in their tectonic setting and appear to have formed by static shear failure, whereas strongly polished fracture surfaces result from movement across fracture planes. Deformed coal seams are also affected by distinctive, large-scale, tectonic fracture sets. The extent of fracturing within coal seams can be assessed using different techniques including measuring fracture frequency directly, performing various strength and hardness tests, making relatively simple subjective assessments on the appearance of the coal or monitoring the size distribution of the coal product. By applying some of these methods within working opencast sites, it can be shown that large amounts of abnormally fractured coal were formed along coal-based thrust flats or detachments but that the distribution of fractured coal along detached seams is rarely homogeneous. Enhanced fracturing often occurred in association with the localised thickening of seams along small-scale thrusts or within coal duplexes. Variable seam thicknesses and pockets of structurally thickened coal are seen as the most efficient means by which the presence and location of significant amounts of fractured coal can be predicted from borehole evidence during prospecting.     

Cosmogenic 3He exposure ages and geochemistry of basalts from Ascension Island,Atlantic Ocean

The chronology and origin of volcanism of Ascension Island, South Atlantic Ocean, is poorly resolved. Here we use in situ produced cosmogenic ³He in olivine and pyroxene phenocrysts from well-preserved lava flows to date the main sub-aerial basalt volcanism on the island. Etching olivine separates in HF/HNO₃ appears to remove a significant proportion of the implanted radiogenic ⁴He contribution. Average exposure ages of each flow corrected for radiogenic He range from 328 ka to 186 ka and are used to refine the chronology and stratigraphy of the island. Magmatic ³He/⁴He ratios derived from in vacuo crushing are in the range of 6.3–7.3 R_A. This range is lower than the neighbouring Mid-Atlantic Ridge segment (6–8°S) but slightly higher than measured in regional ocean islands of St. Helena, Tristan da Cunha and Gough. Combining these data with new trace element data and published radiogenic isotope ratios it appears that the Ascension Island magmatism is a mix of HIMU mantle material, typified by basalts from St. Helena, and depleted MORB-source mantle.     

Application of third generation shallow water wave models in a tidal environment

Wave modeling was performed in the German Bight of the North Sea during November 2002, using the spectral wave models, namely the K-model and Simulating WAves Nearshore (SWAN), both developed for applications in environments of shallow water depths. These models mainly differ with respect to their dissipation source term expressions and in exclusion or inclusion of nonlinear wave–wave interactions. The K-model uses nonlinear dissipation and bottom dissipation, and neglects quadruplet wave–wave interaction whereas, SWAN includes, besides bottom dissipation, dissipation by white-capping and depth induced wave breaking and triad wave–wave interaction. The boundary spectra were extracted from the WAM model results of a North Sea hindcast of the HIPOCAS project, wind fields, tidal current and water level variations from the results of models used in the Belawatt project. The purpose of this study was to test the performance of both wave models to see whether they were able to predict near-shore wave conditions accurately. The runs were performed with and without tidal current and level variations to determine their effect on the waves. Comparisons of model results with buoy measurements show that taking into account tides and currents improve the spectral shape especially in areas of high current speeds. Whereas SWAN performed better in terms of spectral shape, especially in case of two peaked spectra, the K-model showed better results in terms of integrated parameters.Responsible Editor: Hans Burchard     

Wave climatology and extreme value analysis for the Baltic Sea area off the Warnemünde harbour entrance

Ocean Dynamics - A numerical wave model was used to determine the wave climate in the southern Baltic Sea. The basic data derived from wave hindcasts were evaluated statistically. Climate graphs...     

Quality, palynology, and palaeoenvironmental interpretation of the Ilgin lignite, Turkey

The Ilgin lignite field can be subdivided into the Haramiköy and Kurugöl areas which are separated by an area of basement and a fault. The lignite-bearing sequence consists mainly of fluvial and lacustrine Neogene deposits. The Ilgin lignite, averaging 8 m (up to 25 m) thick, is blackish brown and dark brown in colour. The lignite contains abundant brown wood, plant remains and white gastropod shells. Samples have an average of 38.9% moisture on an as-received basis and a mean of 3.9% total sulphur on an air-dried basis. Geochemical analysis, using an ICP-MS, was undertaken. Thirteen lignite core samples from three boreholes drilled in the Kurugöl area were ashed at 750°C. The average trace element contents of the lignite show a higher concentration of U (average 43 ppm) when compared to the range for most coals in the world, while the others (Ti, P, Sc, Be, Mn, Co, Cu, Zn, Ga, As, Rb, Sr, Zr, Nb, Mo, Cs, Ba, Y, Ta, W, Tl, Pb, Bi, Th, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu) agree with the global ranges. The Ilgin lignite is identified as of Middle Miocene (Middle Serravallian) age and occurs within lacustrine sediments deposited under subtropical climatic conditions.