Retrieval and Validation of Chlorophyll-a Concentrations in the Coastal Waters Off Yanam and Kakinada (Godavari) Basin Along East Coast of India

In this study chlorophyll measurements were made during March 2012 in the estuarine waters of Off Kakinada and Yanam coast, Bay of Bengal onboard a coastal vessel. In-situ water samples and optical data was collected at 21 stations (surface to 150 m depth) using Underwater radiometer (Hyperpro-II). In-vivo chlorophyll profiles were collected using wet labs fluorometer integrated with underwater Hyperspectral radiometer. Chlorophyll-a concentrations were estimated using HPLC by collecting the water samples at each sampling location. And also chlorophyll-a concentrations were retrieved from the OCM-2 data of OCEANSAT-2 satellite, processed using SeaDAS v.6.2 with the available global ocean colour algorithms namely, OC2 and OC4V4. A total of 33 samples used covering all the stations for chlorophyll-a estimation, and surface water samples of all the stations only being used for direct comparison among chlorophyll concentrations of HPLC, in-situ (fluorometrically integrated to Hyperpro-II) and retrieved from OCM-2. A good correlation found between the Fluorometer derived and HPLC measured chlorophyll-a concentration with an R² value of 0.78. The relation between Chlorophyll-a concentration measured from HPLC and retrieved from OCM-2 (OC2 and OC4V4 algorithms) using SeaDASv.6.2 for 10 samples has been compared for validation and obtained an R² value of 0.6. Also comparisons done with the in-situ measured (fluorometer) Chlorophyll-a concentration with OCM-2 chlorophyll data (OC4-V4 and OC2 algorithms) and validation with 10 concurrent in-situ surface measurements showed a significant overestimation by OCM-2 at low chlorophyll-a concentrations and underestimation at high chlorophyll-a concentrations.     

Natural reduction of CO2 observed in the pre-monsoon period at the coastal station, Goa

Measurements of carbon dioxide (CO₂) concentration were made at a coastal land station, Goa, on the west coast of India from March to June 2003 as part of the ARMEX (ARabian sea Monsoon Experiment) campaign. The observations show a systematic reduction (~120?mg?m^?3) of CO₂ concentration during the pre-monsoon months, March–May, during which no significant change in anthropogenic emissions takes place. CO₂ shoots up from 520 to 635?mg?m^?3 in June with the onset of the South West monsoon. Back trajectories show that the source of air mass gradually shifts from the coastal land mass to the open southern Arabian Sea during the pre-monsoon period. The observed reduction in CO₂ is explained in terms of earlier measurements in the Arabian Sea indicating maximum chlorophyll a (Sarupria and Bhargava in J Mar Sci 27:292–297, 1998) and minimum partial pressure of CO₂ (Sarma in J Geophys Res 108:3225, 2003) in the sea waters off the west coast of India during the pre-monsoon period, cleaner marine air mass advection from the open sea, and negligible local vertical CO₂ flux.     

Light hydrocarbons geochemistry of surface sediment from petroliferous region of the Mehsana block,North Cambay Basin

A study was carried out to test the usefulness of surface geochemical methods as regional evaluation tools in petroliferous region of the Mehsana block, North Cambay Basin. A suite of 135 soil samples collected from the depth of 2.5 m, were analyzed for adsorbed light gaseous hydrocarbons and carbon isotopes (δ¹³C_methane and δ¹³C_ethane). The light gaseous hydrocarbon analysis show that the concentration ranges 402 ppb, 135 ppb, 70 ppb, 9 ppb and 18 ppb of C₁, C₂, C₃, iC₄ and nC₄, respectively. The value of carbon isotopic ranges of methane −29.5 to −43.0‰ (PDB) and ethane −19.1 to −20.9‰ (PDB). This data, when mapped, indicates patterns coinciding with major known oil and/or gas field of Sobhasan/Linch in this study area. The existence of un-altered petroliferous microseeps of catagenetic origin is observed in the study area. A regional study, such as the one described here, can provide important exploration facts concerning the regional hydrocarbon potential in a block. This method has been confirmed and can be applied successfully in frontier basins.     

Geochemical exploration for hydrocarbons in the soils of southeast of Krishna-Godavari Basin, Andhra Pradesh

Surface adsorbed gas surveys and geo-microbiological surveys are known techniques of petroleum exploration and aim towards risk reduction in exploration by way of identifying the areas warm with hydrocarbons and to establish intense exploration priorities amongst the identified warm areas. The present investigation aims to explore correlation between the adsorbed gas distribution pattern with the distribution of the counts of methane, ethane, propane and butane microbial oxidizers in the sub soil samples to establish the role of the latter in identifying the upward migration of hydrocarbons especially in the known petroliferous Krishna-Godavari Basin, India. A total of 135 soil samples were collected near oil and gas fields of Tatipaka, Pasarlapudi areas of Krishna Godavari Basin, Andhra Pradesh. The soil samples were collected from a depth of 2?C2.5 m. The samples collected, were analyzed for indicator hydrocarbon oxidizing bacteria, adsorbed light gaseous hydrocarbons and carbon isotopes (??¹³C_methane). The microbial prospecting studies showed the presence of high bacterial population for methane (3.94 × 10⁵ cfu/gm), ethane (3.85 × 10⁵ cfu/gm), propane (4.85 × 10⁵ cfu/gm) and butane oxidizing bacteria (3.63 × 10⁵ cfu/gm) in soil samples indicating microseepage of hydrocarbons. The light gaseous hydrocarbon analysis showed 83 ppb, 92 ppb, 134 ppb, 187 ppb and 316 ppb of C₁, C₂, C₃, nC₄ and nC₅, respectively, and the carbon isotopic composition of ??¹³C₁ of the samples ranged between ? 36.6 ?? to ?22.7?? (Pee Dee Belemnite) values, which presents convincing evidence that the adsorbed soil gases collected from these sediments are of thermogenic origin. Geo-microbial prospecting method and adsorbed soil gas and carbon isotope studies have shown good correlation with existing oil/ gas fields of K.G basin. Microbial surveys indicating microseepage of hydrocarbons can, therefore, independently precede other geochemical and geophysical surveys to delineate areas warm with hydrocarbons and mapped microbiological anomalies may provide focus for locales of hydrocarbon accumulation in the K.G basin.     

Passive Fathometry in Shallow Waters of the Indian Continental Shelf

The present study demonstrates the use of ambient noise for estimating the ocean depth in shallow waters of the Indian continental shelf. Ocean depth is estimated using a technique known as passive fathometer processing, which involves the correlation of surface-generated ambient noise with its reflection from the seabed. Ambient noise data collected using a vertical array from four locations (off Cochin, off Cuddalore, off Kakinada, and off Goa) along the Indian continental shelf were used for the study. The noise data recorded during windy conditions within the frequency band of 200–5000 Hz were used for analysis. Both conventional and adaptive beamforming techniques were applied for the passive estimation of the ocean depth. The estimated water column depth using the ambient noise measurement shows good agreement with the known depth from all the four locations. The advantages and limitations of the adaptive processing technique have also been discussed. The study clearly demonstrates the application of the surface-generated ambient noise in seabed image processing.     

Assessment of the hurricane-induced power outages from a demographic,socioeconomic, and transportation perspective

Natural disasters have devastating effects on the infrastructure and disrupt every aspect of daily life in the regions they hit. To alleviate problems caused by these disasters, first an impact assessment is needed. As such, this paper focuses on a two-step methodology to identify the impact of Hurricane Hermine on the City of Tallahassee, the capital of Florida. The regional and socioeconomic variations in the Hermine’s impact were studied via spatially and statistically analyzing power outages. First step includes a spatial analysis to illustrate the magnitude of customers affected by power outages together with a clustering analysis. This step aims to determine whether the customers affected from outages are clustered or not. Second step involves a Bayesian spatial autoregressive model in order to identify the effects of several demographic-, socioeconomic-, and transportation-related variables on the magnitude of customers affected by power outages. Results showed that customers affected by outages are spatially clustered at particular regions rather than being dispersed. This indicates the need to pinpoint such vulnerable locations and develop strategies to reduce hurricane-induced disruptions. Furthermore, the increase in the magnitude of affected customers was found to be associated with several variables such as the power network and total generated trips as well as the demographic factors. The information gained from the findings of this study can assist emergency officials in identifying critical and/or less resilient regions, and determining those demographic and socioeconomic groups which were relatively more affected by the consequences of hurricanes than others.     

Geochemical characterization of adsorbed light gaseous alkanes in near surface soils of the eastern Ganga basin for hydrocarbon prospecting

This study aims to assess the hydrocarbon potential of Ganga basin utilizing the near surface geochemical prospecting techniques. It is based on the concept that the light gaseous hydrocarbons from the oil and gas reservoirs reach the surface through micro seepage, gets adsorbed to soil matrix and leave their signatures in soils and sediments, which can be quantified. The study showed an increased occurrence of methane (C₁), ethane (C₂) and propane (C₃) in the soil samples. The concentrations of light gaseous hydrocarbons determined by Gas Chromatograph ranged (in ppb) as follows, C₁: 0–519, C₂: 0–7 and C₃: 0–2. The carbon isotopic (VPDB) values of methane varied between ?52.2 to ?27.1‰, indicating thermogenic origin of the desorbed hydrocarbons. High concentrations of hydrocarbon were found to be characteristic of the Muzaffarpur region and the Gandak depression in the basin, signifying the migration of light hydrocarbon gases from subsurface to the surface and the area’s potential for hydrocarbon resources.     

Shaking table tests to investigate the influence of various factors on the liquefaction resistance of sands

This paper presents the shaking table studies to investigate the factors that influence the liquefaction resistance of sand. A uniaxial shaking table with a perspex model container was used for the model tests, and saturated sand beds were prepared using wet pluviation method. The models were subjected to horizontal base shaking, and the variation of pore water pressure was measured. Three series of tests varying the acceleration and frequency of base shaking and density of the soil were carried out on sand beds simulating free field condition. Liquefaction was visualized in some model tests, which was also established through pore water pressure ratios. Effective stress was calculated at the point of pore water pressure measurement, and the number of cycles required to liquefy the sand bed were estimated and matched with visual observations. It was observed that there was a gradual variation in pore water pressure with change in base acceleration at a given frequency of shaking. The variation in pore water pressure is not significant for the range of frequency used in the tests. The frequency of base shaking at which the sand starts to liquefy when the sand bed is subjected to any specific base acceleration depends on the density of sand, and it was observed that the sand does not liquefy at any other frequency less than this. A substantial improvement in liquefaction resistance of the sand was observed with the increase in soil density, inferring that soil densification is a simple technique that can be applied to increase the liquefaction resistance.