What type was SN 1987A?

A comparison is made of the light and colour curves of the SN 1987A in the first 280 days with the mean properties of type II supernovae. The conclusion is that even though it has H lines, and was not a typical type II supernova, but a peculiar object from a photometric point of view. The implications for inclusion of SN 1987A in the context of the usual Minkowski-Zwicky classification are explicitly discussed.     

Notes on Hori Method for Canonical Systems

In this paper a slightly different approach is proposed for the process of determining the functions S _m and H _m ^* of the algorithm of the canonical version of Hori method. This process will be referred to as integration theory of the mth order equation of the method. It will be shown that the ordinary differential equation with an auxiliary parameter t ^* as independent variable, introduced through Hori auxiliary system, can be replaced by a partial differential equation in the time t. In this way, the mth order equation of the algorithm assumes a form very similar to the one of other perturbation methods. In virtue of this new approach of the integration theory for Hori method, Lagrange's variational equations introduced by Sessin are revised. As an example, the Duffing equation is solved through this new approach.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Validation of a time-domain strip method to calculate the motions and loads on a fast monohull

The paper presents a comparison between experimental data and numerical results of the hydrodynamic coefficients and also of the wave induced motions and loads on a fast monohull model. The model with 4.52 m length was constructed in Fibre Reinforced Plastic (FRP), and made up of 4 segments connected by a backbone in order to measure sectional loads. The objective of the investigation was to assess the capability of a nonlinear time domain strip method to represent the nonlinear and also the forward speed effects on a displacement high speed vessel advancing in large amplitude waves. With this objective in mind the experimental program included forced oscillation tests in heaving and pitching, for a range of periods, three different amplitudes and several speeds of advance. In head regular waves comprehensive ranges of wave periods, wave steepness and speeds, were tested in order to measure heave, pitch and loads in three cross sections.

The numerical method assumes that the radiation and diffraction hydrodynamic forces are linear and the nonlinear contributions arise from the hydrostatics and Froude–Krilov forces and the effects of green water on deck. The assumption of linearity of the radiation forces is validated by comparing calculated hydrodynamic coefficients with experimental data for three different amplitudes of the forced oscillations. Both global coefficients and sectional coefficients are compared. The motions and loads in waves are compared in terms of first and higher harmonic amplitudes and also in terms of sagging and hogging peaks.     

Magnetic anomalies in the canary basin and the Mesozoic evolution of the central North Atlantic

The data from a recent magnetic compilation by Verhoefet al. (1991) off west Africa were used in combination with data in the western Atlantic to review the Mesozoic plate kinematic evolution of the central North Atlantic. The magnetic profile data were analyzed to identify the M-series sea floor spreading anomalies on the African plate. Oceanic fracture zones were identified from magnetic anomalies and seismic and gravity measurements. The identified sea floor spreading anomalies on the African plate were combined with those on the North American plate to calculate reconstruction poles for this part of the central Atlantic. The total separation poles derived in this paper describe a smooth curve, suggesting that the motion of the pole through time was continuous. Although the new sea floor spreading history differs only slightly from the one presented by Klitgord and Schouten (1986), it predicts smoother flowlines. On the other hand, the sea floor spreading history as depicted by the flowlines for the eastern central Atlantic deviates substantially from that of Sundvik and Larson (1988). A revised spreading history is also presented for the Cretaceous Magnetic Quiet Zone, where large changes in spreading direction occurred, that can not be resolved when fitting magnetic isochrons only, but which are evident from fracture zone traces and directions of sea floor spreading topography.Deceased 11 November 1991     

Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.     

Measuring lysosomal stability as an effective tool for marine coastal environmental monitoring

The use of lysosomal stability in the mussel, Mytilus galloprovincialis, as a potential biomarker of environmental contamination has been evaluated along the Portuguese coast. To this end, the neutral red retention (NRR) time was measured in mussel haemocytes gathered from nine different locations reflecting different degrees of anthropogenic contamination. Mussels collected in the vicinity of industrial and urban areas showed the lowest lysosomal stability. Additionally, no significant seasonal variability (winter-spring/summer) for NRR time was observed. In order to further support the usefulness of this method as an integrated tool for monitoring marine coastal environments, we compared the levels of xenobiotics in mussel tissues with the obtained NRR values. The results highlighted a consistent pattern, with the lowest lysosomal stability intimately correlated with the higher contaminant concentrations. In summary, this integrated approach further demonstrated that the NRR assay can provide useful and objective indications of the real health status of organisms subjected to different stress agents, being a valid option for environmental monitoring.     

海南岛博鳌港沉积物的沿岸输送

分析了博港沿岸沉积牧粒度参数的沿岸变化，并应用沉积物粒径趋势分析模型（GSTA模型）对沉积物运动趋势进行了分析。GSTA模型结果表明，博鳌港沿岸的泥沙在横向上表现为：万泉河口以北岸段为由海向岸运动，近期处于淤积状态；万泉河口以南岸段即玉带滩大致以NNE走向到NE走向的转折点为界，北部主要是由岸向海运动，是侵蚀岸段，而南部则主要为由海向岸运动，有少量的淤积，博鳌港沿岸泥沙输送在纵向上表现为：万泉河口以北由南向北运动，万泉河口以南，北部是由北向南运动，南部是由南向北运动，其次还运用了经验公式对GSTA结果进行了验证，得到了通过万泉河口南部（玉带滩）3个断面的沿岸漂沙量，其沿岸漂沙方向主要为南北向，以上两种分析方法得出的结果和当地的许多地貌证据基本符合，而GSTA模型在玉带滩北部泥沙纵向输运方向与经验公式计算结果所表现出的一些差异，主要是由于研究时间尺度和所用的资料特征的差异性造成的。     

水中矿物油荧光特性实验研究

为了实现现场测量地表水中矿物油含量的全光纤荧光计的研制。采用荧光光谱测量分析方法 ,于 1 999年 1 0月— 2 0 0 0年 5月 ,采集了国内外不同的地区原油和成品油共 2 3种 ,用1 4种不同波长的激发光激励 ,进行荧光光谱特性测量实验研究。同时 ,对不同浓度的矿物油、水混合液也进行了测量实验 ,得出其最低检测浓度为 0 .0 0 5mg/L ;测量了青岛近岸海域表层受油污染海水的含油量为 0 .0 1～ 0 .2 2mg/L ;此外对水中矿物油受激荧光发射原理也作了简述。并对水中矿物油荧光光谱特性、浓度与荧光强度的关系 ,以及为研制现场测量水中矿物油浓度的全光纤荧光计的可能性作出了结论性的意见