Geotechnical,Geological, and Hydrologic Characterization of a 52 km Electrical Power Transmission Line Alignment Route in Southeastern Nigeria

A 132 kVA electrical transmission line has been proposed to connect the towns of Eket and Ikot Abasi in the eastern Niger delta in Nigeria. A geotechnical and hydrological study was performed to geotechnically characterize the route alignment and to provide data for design of the foundations for the transmission towers. In this paper, we introduce the study location and its geological, topographical and physiological characteristics, present the hydrological and geotechnical investigations and their results, and make recomendations for the design of the transmission tower foundations. Hydrological inspection of the power line alignment revealed that the route is traversed by numerous tributaries of the Qua-Iboe and Imo Rivers, the two major rivers that control the drainage of the study area. In-situ geotechnical tests consisted of cone penetration tests (CPTs), vane shear tests, test pit sampling (0–2.0 m depth) and lithologic boreholes (20 and 50 m deep). Laboratory tests included grain size analysis, pH determination and Atterberg Limits. Based on the CPT log pattern, no of stratum, and refusal depths, the soils along the transmission alignment were classified into twelve structural domains having common geotechnical properties. Because of the elevated water levels, and the nature of the soils, deep pile foundations were recommended for the towers. Software from the Louisiana Transportation Research Center, was employed to estimate skin friction, end bearing, and ultimate bearing capacities for assumed 225 mm square shaped reinforced concrete pile in each of the different zones of the alignment.     

Hydrogeophysical investigation and estimation of groundwater potentials of the Lower Palaeozoic to Precambrian crystalline basement rocks in Keffi area, north-central Nigeria, using resistivity methods

The use of resistivity sounding and two-dimensional (2-D) resistivity imaging was investigated with the aim of delineating and estimating the groundwater potential in Keffi area. Rock types identified are mainly gneisses and granites. Twenty-five resistivity soundings employing the Schlumberger electrode array were conducted across the area. Resistivity sounding data obtained were interpreted using partial curve matching approach and 1-D inversion algorithm, RESIST version 1.0. The 2-D resistivity imaging was also carried out along two traverses using dipole–dipole array, and the data obtained were subjected to finite element method modeling using DIPRO inversion algorithm to produce a two-dimensional subsurface geological model. Interpretation of results showed three to four geoelectrical layers. Layer thickness values were generally less than 2 m for collapsed zone, and ranged from 5 to 30 m for weathered bedrock (saprolite). Two major aquifer units, namely weathered bedrock (saprolite) aquifer and fractured bedrock (saprock) aquifer, have been delineated with the latter usually occurring beneath the former in most areas. Aquifer potentials in the area were estimated using simple schemes that involved the use of three geoelectrical parameters, namely: depth to fresh bedrock, weathered bedrock (saprolite) resistivity and fractured bedrock (saprock) resistivity. The assessment delineated the area into prospective high, medium and low groundwater potential zones.     

Geochemical fractionation and ecological risks assessment of benthic sediment-bound heavy metals from coastal ecosystems off the Equatorial Atlantic Ocean

This study determines the pollution, fractionation, and ecological risks of sediment-bound heavy metals from coastal ecosystems off the Equatorial Atlantic Ocean. Contamination Factor(CF), pollution load index(PLI), and geoaccumulation index(Igeo) were used to assess the extent of the heavy metal pollution, while the potential ecological risk was evaluated using the risks assessment code(RAC) and Hkanson potential ecological risk. The analysis revealed concentrations(mg/g, dw) of the cadmium(Cd),chromium(Cr), copper(Cu), nickel(Ni), and lead(Pb) in sediments for wet and dry seasons vary from 4.40-5.08, 14.80-21.09. 35.03-44.8, 2.14-2.28, and 172.24-196.39, respectively. The results also showed that the metal fractionation percentages in the residual, oxidizable, and reducible fractions are the most significant, while the exchangeable and carbonate bound trace metals are relatively low. The RAC values indicate no risk for Cd and Ni and low risk for other metals at all the studied sites during both seasons.Potential ecological risk analysis of the heavy metal concentrations indicates that Cd had high individual potential ecological risk, while the other metals have low risk at all investigated sites. The multi-elemental potential ecological risk indices(R_1) indicate high ecological risk in all the ecosystems.     

Textural and geochemical characteristics of the Ajali Sandstone,Anambra Basin,SE Nigeria: Implication for its provenance

This study presents the mineralogical, textural and geochemical characteristics of the regional Maastrichtian Ajali Sandstone in Anambra Basin, SE Nigeria. The intent is to highlight possible constraints on the chemical weathering conditions of the source materials on one hand, and to infer the provenance on the other hand. The investigation approach involved field studies and collection of samples from 12 different outcrop locations, followed by laboratory studies involving grain-size analysis (GSA), major and trace elements analyses using the X-ray fluorescence (XRF) method as well as thin section petrography. Field studies show that the sandstones are friable at all locations and range in color from white in freshly cut stone, to reddish brown on weathering. In addition, the sandstone units are cross-bedded and show graded bedding exemplified by fining upward sequence. Textural examination indicates that the sandstones range from fine to medium sands, constituting about 76 to 99% sand fraction, with graphic mean grain size of 0.23 to 0.53 mm. Standard deviation (sorting) ranges from 0.56 to 1.24 Ø and implies moderately well sorted sediments. Inferred from the textural indices, the depo-environmental discrimination of the Ajali Sandstone revealed a fluvial/river system-dominated sedimentary process. The sandstones are quartz arenite with quartz greater than 90% and less than 5% K-feldspar which indicate a predominant basement source as also revealed by the heavy mineral assemblages. In addition, major elemental oxides shows SiO₂ content greater than 96% for the fresh Ajali Sandstone samples with extreme depletion of mobile oxides such as Na₂O, CaO and the ferromagnesian minerals through weathering and sedimentary processes. Provenance and tectonic setting discrimination using geochemical data and compositional maturity revealed typical felsic igneous-dominated cratonic environment while inter-elemental ratios (such as Zr/Cr, Y/Ni, Th/Sc, La/Sc and La/Co) and ternary plots (e.g. Th–Sc–Zr; La-Th–Sc and Th-Co-Zr) reflect passive continental margin setting for the Ajali Sandstone. Consequently, the source area is constrained to the Precambrian basement rock units of Adamawa-Oban massif areas to the east of the Anambra Basin and the adjacent Abakaliki Anticlinorium.     

Distribution and ecological risks of polycyclic aromatic hydrocarbons (PAHs) in sediments of different tropical water ecosystems in Niger Delta,Nigeria

Sediments are considered as suitable matrices to study the contamination levels of aquatic environment since they represent a sink for multiple contaminant sources. In this study, the influence of sediment characteristics on the distribution of polycyclic aromatic hydrocarbons (PAHs) and its potential risk in euryhaline, freshwater and humic aquatic bodies of Douglas/Stubbs creek, Ikpa River and Eniong River, respectively, were investigated. The level of PAHs in sediment was quantified using GC–MS, while sediment properties including total organic carbon (TOC) content and grain size were determined by the wet oxidation and hydrometer methods, respectively. The results revealed that the total levels of PAHs in sediment varied significantly between the euryhaline, freshwater and humic freshwater ecosystems. In Ikpa River freshwater ecosystem, a total PAHs load of 1055.2 ng/g was recorded with the suites concentration ranging from 13.0 ng/g (for acenaphthylene) to 161 ng/g (for pyrene). The humic ecosystem of Eniong River had a total PAH load of 11.06 ng/g, while the suites level recorded ranged from 0.04 ng/g for acenaphthene to 2.65 ng/g for chrysene. The total level of PAHs detected in the euryhaline Douglas/Stubbs creek was 14.47 ng/g, and suite concentrations varied between 4.27 ng/g for naphthalene and 5.13 ng/g for acenaphthylene. This shows variation in quantity and quality of PAH contaminants with the nature of ecosystems. It implies complex and diverse contamination sources as well as different capabilities to recover from PAH contamination. Correlation analysis has shown that sediment particle and TOC content influenced PAHs burden in bottom sediments, but the effects varied with the molecular weight of PAHs and the nature of the ecosystems. The TOC was the most significant determinant of PAHs load and distribution in sediment of the freshwater Ikpa River and euryhaline Douglas/Stubbs but had little or no influence in the humic sediment of Eniong River, while the influence of particle size was generally indefinite but slightly associated with PAHs accumulation in the euryhaline sediment. Generally, the total PAH levels (11.0–1055.2 ng/g) recorded were low and below the allowable limit for aquatic sediments. The ecological risk assessment revealed that these levels were lower than the effects range low and effects range medium values. This indicates no acute adverse biological effect although the accumulation of PAHs in freshwater ecosystem of Ikpa River may pose ecological risks as most of the carcinogenic PAH suites had relatively high pollution indices compared to other ecosystem types studied.     

Wave induced random oscillations of pipelines during laying

A study is presented of wave induced random vibrations of pipelines suspended in the $\text{J-}\text{configuration}$. The analysis is based on the use of Morison's equation for the hydrodynamic forces and a linearized spectral analysis of response in the first five normal modes of oscillation. Three pipelines are studied for an operational sea state of $\text{H}{}_{\mathrm{S}}\text{= 4.57}\text{m}$ and a survival case of $\text{H}{}_{\mathrm{S}}\text{= 12}\text{m}$. Extensive results are given for the expected peak deflections and stresses. Under operational conditions the expected peak stresses were found to be well below the maximum allowable stress for both the pipeline and the concrete coating, but in the survival case the peak stresses were found to be unacceptably high.     

Variation in existing domestic service level of pipe-borne water supply and associated challenges in a tourism destination of Uyo Capital City,Nigeria

GeoJournal - Domestic water supply plays a very significant role in the day to day life of humans in the global society and without water, life cannot be continued and that while water provisions...