Halocinèse précoce associée au rifting jurassique dans l'Atlas central de Tunisie (région de Majoura–El Hfay)

Seismic and sequence stratigraphy analyses, petroleum-well control and surface data studies of the Majoura–El Hfay region in the Central Atlas of Tunisia had led to identify and calibrate Jurassic seismic horizons. Seismic stratigraphic sections, seismic tectonics analyses, isochron and isopach mapping of Jurassic sequences show a differentiated structuring of platform and depocentre blocks limited by deep-seated NE–SW, north–south east–west and NW–SE faults intruded by Upper Triassic salt. The early salt migration seems to have started by the platform fracturing during the Lower Liassic rifting event. These movements are fossilized by thickness variations of Jurassic horizons, aggrading and retrograding onlap and toplap structures between subsiding rim-syncline gutters and high platform flanks intruded by salt pillows and domes. The salt migration is also attested by Middle and Upper Jurassic space depocentre migrations. Around the Majoura–El Hfay study blocks bounded by master faults, Triassic salt have pierced the Cretaceous and Tertiary sedimentary cover in a salt diapir extrusion and salt wall structures. To cite this article: D. Tanfous Amri et al., C. R. Geoscience 337 (2005).     

Thick sections of layered ultramafic cumulates in the Oman ophiolite revealed by an airborne hyperspectral survey: Petrogenesis and relationship to mantle diapirism

Using the HyMap instrument, we have acquired visible and near infrared hyperspectral data over the Maqsad area of the Oman ophiolite (~ 15 × 60 km). This survey allowed us to identify and map the distribution of clinopyroxene-rich cumulates (inter-layered clinopyroxenites and wehrlites) whose occurrence was previously undocumented in this area. The cumulates reach several hundred meters in thickness and crop out at distances exceeding 15 km on both sides of the Maqsad former spreading centre. They occur either in mantle harzburgites, as km-sized layered intrusions surrounded by fields of pegmatitic dykes consisting of orthopyroxene-rich pyroxenite and gabbronorites, or at the base of the crustal section where they are conformably overlain by cumulate gabbros. These ultramafic cumulates crystallized from silica- and Mg-rich melts derived from a refractory mantle source (e.g. high Cr#, low [Al₂O₃], low [TiO₂]). These melts are close to high-Ca boninites, although, strictly speaking, not perfect equivalents of present-day, supra-subduction zone, boninites. Chemical stratigraphy reveals cycles of replenishment, mixing and fractional crystallization from primitive (high Mg#) melts, typical of open magma chambers and migration of inter-cumulus melts. The TiO₂ content of clinopyroxene is always low (≤ 0.2 wt.%) but quite variable compared to the associated pegmatites that are all derived from a source ultra-depleted in high field strength elements (HFSE). This variability is not caused by fractional crystallization alone, and is best explained by hybridization between the ultra-depleted melts (parent melts of the pegmatites) and the less depleted mid-ocean ridge basalts (MORB) parent of the dunitic–troctolitic–gabbroic cumulates making up the crustal section above the Maqsad diapir.We propose that, following a period of magma-starved spreading, the Maqsad mantle diapir, impregnated with tholeiitic melts of MORB affinity, reached shallow depths beneath the ocean ridge. This diapir induced melting of the formerly accreted and hydrothermally altered lithosphere. At this stage, these boninitic-like lithospheric melts crystallized as pegmatitic dykes. As the diapir continued to rise, the amount of MORB reaching shallow depths increased, together with the surrounding temperature, leading to the formation of magma chambers where the crystallization of layered cumulates became possible. These cumulates remained rich in pyroxene and devoid of plagioclase as long as the contribution of MORB-derived melts was moderate relative to the lithospheric-derived melts. As the contribution of MORB to the refilling of the magma chamber increased, gabbroic cumulates started to crystallize.     

Burial history determination of the Triassic succession of Central and Northern Tunisia using clay minerals

The Oued Belif 48 and Koudiat El Halfa 5 borehole samples have been analysed in order to reveal the mineralogical composition of the Triassic successions and their burial history within the geological evolution of the Tethysian southern margin. Oued Belif 48 borehole belongs to Nefza district which is a part of the “Nappe zone” (Tellian unit, north-western Tunisia). Koudiat El Halfa 5 borehole crosses the Koudiat El Halfa diapir (north–west of the north–south axis, Central Atlas). In this paper, the burial degree of evaporitic Triassic samples was determined by the “illite crystallinity” index and by the evolution of the other phyllosilicates, essentially chlorite, talc and illite/chlorite and illite/smectite mixed layers. The studied samples of the two boreholes are characterized by the presence of abundant clay minerals. The <2-μm grain-size fraction of the samples is mostly composed of illite, chlorite and smectite and may contain a slight percentage of swelling layers (illite/smectite and illite/chlorite). The illite crystallinity value measured on ethylene glycol solvated oriented mounts of the Oued Belif 48 samples oscillates globally between 1 and 2.5 characterizing the epizonal zone with a range of 300–400 °C temperatures. The measures of Koudiat El Halfa 5 samples crystallinity index show a value ranging from 2 to 4, which indicates the anchizone and early epizone burial stage (temperatures around 200 °C). These data can be explained by Miocene magmatic activities characterizing the Triassic material of Nefza district and also by burial phenomena effects.     

Use of sediment quality indicators for heavy metals contamination and ecological risk assessment in urbanized coastal zones

The urbanized coastal zones are frequently faced to various pollutant discharges mainly in the shoreline. The quantification of the pollution level was mainly based on sea-water analysis. However, in this environment, the sediment characterization, using quality indicators, may constitute an accurate approach. The latter can be particularly appropriate to define heavy metals pollution degree. Chemical analyses of Cd, Cu, Zn, and Fe were undertaken for a total of 45 surface marine sediment samples of Gabes city coast. There is a significant extension of pollution, strongly influenced by the dominant longshore current. The studied sediments were found usually enriched with Cu, Cd, and Zn. These anthropogenic heavy metals have identical behavior and similar distribution. These metals did not show any correlations with Fe chosen as natural tracer. The multi-element indices used permitted to conclude that 70% of sampling sites are highly affected by heavy metal contamination and associated with very high ecological risk. These indices use a simple contamination factor, which, however, would not take account of the sedimentary inputs and the complex sediment behavior. Consequently, modified indices, employing enrichment factor, were used and demonstrated better to assess pollution and ecological risk.     

Performance evaluation of HWRF model during post monsoon tropical cyclone Nilofar

An accurate tropical cyclone track and intensity forecast is very important for disaster management. Specialized numerical prediction models have been recently used to provide high-resolution temporal and special forecasts. Hurricane Weather Research and Forecast (HWRF) model is one of the emerging numerical models for tropical cyclone forecasting. This study evaluates the performance of HWRF model during the post monsoon tropical cyclone Nilofar on the north Indian Ocean basin. The evaluation uses the best track data provided by the Indian Meteorological Department (IMD) and the Joint Typhoon Warning Centre (JTWC). Cyclone track, central pressure, and wind speed are covered on this evaluation. Generally, HWRF was able to predict the Nilofar track with track error less than 230 km within the first 66 h of forecast time span. HWRF predicted more intense tropical cyclone. It predicted the lowest central pressure to be 922 hPa while it reached 950 hPa according to IMD and 937 hPa according to JTWC. Wind forecast was better as it predicted maximum wind speed of 122 kt while it reached 110 and 115 kt according to IMD and JTWC, respectively.     

Mapping geology in Djelfa District (Saharan Atlas,Algeria), using Landsat 7 ETM+ data: an alternative method to discern lithology and structural elements

Djelfa area in the central Saharan Atlas is characterized by its high lithological diversity with different facies from the Triassic to the Tertiary. The lack of published geological maps of the region (Djelfa) prompted us to test specific processing of satellite images (ratio bands, principal component analysis) in order to establish a lithological discrimination of the region. Several treatments allowed us to map the lineaments highlighting the various tectonic structures of the region. The combination of field and remote sensing data pointed out the double influence of the E-W Eocene and N-S Miocene phases in the structuration of these regions. As a large part of the Djelfa area is inaccessible, the obtained results undeniably contribute to a better understanding of the local geology.     

Integrated gravity and seismic investigations over the Jebel Es Souda-Hmaeima structure: implication for basement configuration of the eastern frontal fold-and-thrust belt of Tunisian Atlasic Mountains

A gravity and seismic analysis was conducted over and around Jebel Es Souda-Hmaeima, located on the eastern border of the Tunisian Mountains between the Atlasic block to the west and the Pelagian Block to the east, as part of a study to investigate the subsurface structures. These data, together with outcrop geology, well data, and measurements of physical properties of rock samples, were integrated with a new interpretation of the tectonic model of Jebel Es Souda-Hmaeima anticline. This structure represents a backfolded anticline associated with a steep east-vergent thrust above a blind thrust fault along the base of Triassic formations. The proposed model emphasizes the role of transpressional deformation along deep-seated basement faults and has implications for petroleum generation, migration, and entrapment in central Tunisia.     

Enregistrement de phénomènes de resédimentation au cours du Maastrichtien supérieur et du Paléocène supérieur (J. Serj, Tunisie atlasique) : apport micropaléontologique et signature tectono-eustatique

Sedimentological and biostratigraphic analysis of Campanian–Maastrichtian reduced series of the J. Serj permitted to characterize two episodes of submarine erosion. The first is pre-Upper Maastrichtian (Rosita contusa zone), the second is pre-Upper Palaeocene (Morozovella velascoensis zone). Thus, two type-1 boundary surfaces are distinguished. These surfaces limit three stratigraphic intervals in apparent continuity. Syn-sedimentary tectonic activity is attested by gravity deposits or processes (conglomerates, slumps). To cite this article: A. Amri et al., C. R. Geoscience 337 (2005).     

Atlantic-Type Passive Margin Structural Style of the Cretaceous Basin in Northern Tunisia: Paleoslope Reconstruction and Regional Tectonics

Geotectonics - The purpose of this paper is to characterize the configuration of northern Tunisia’s basin during the Cretaceous on the basis of abundant slump folds and frequent...