Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.     

Late Holocene relative sea level rise and the Neoglacial history of the Greenland ice sheet

In West Greenland, early and mid Holocene relative sea level (RSL) fall was replaced by late Holocene RSL rise during the Neoglacial, after 4–3 cal. ka BP (thousand calibrated years before present). Here we present the results of an isolation basin RSL study completed near to the coastal town of Sisimiut, in central West Greenland. RSL fell from 14 m above sea level at 5.7 cal. ka BP to reach a lowstand of ?4.0 m at 2.3–1.2 cal. ka BP, before rising by an equivalent amount to present. Differences in the timing and magnitude of the RSL lowstand between this and other sites in West and South Greenland record the varied interplay of local and non‐Greenland RSL processes, notably the reloading of the Earth's crust caused by a Neoglacial expansion of the Greenland Ice Sheet (GIS) and the subsidence associated with the collapse of the Laurentide Ice Sheet forebulge. This means that the timing of the sea level lowstand cannot be used to infer directly when the GIS advanced during the Neoglacial. The rise in Late Holocene RSL is contrary to recently reported bedrock uplift in the Sisimiut area, based on repeat GPS surveys. This indicates that a belt of peripheral subsidence around the current ice sheet margin was more extensive in the late Holocene, and that there has been a switch from subsidence to uplift at some point in the last thousand years or so. Copyright © 2008 John Wiley & Sons, Ltd.     

The hydrochemistry of a semi-arid pan basin case study: Sua Pan,Makgadikgadi, Botswana

This study presents results on the fluid and salt chemistry for the Makgadikgadi, a substantial continental basin in the semi-arid Kalahari. The aims of the study are to improve understanding of the hydrology of such a system and to identify the sources of the solutes and the controls on their cycling within pans. Sampling took place against the backdrop of unusually severe flooding as well as significant anthropogenic extraction of subsurface brines. This paper examines in particular the relationship between the chemistry of soil leachates, fresh stream water, salty lake water, surface salts and subsurface brines at Sua Pan, Botswana with the aim of improving the understanding of the system’s hydrology. Occasionally during the short wet season (December–March) surface water enters the saline environment and precipitates mostly calcite and halite, as well as dolomite and traces of other salts associated with the desiccation of the lake. The hypersaline subsurface brine (up to TDS 190,000 mg/L) is homogenous with minor variations due to pumping by BotAsh mine (Botswana Ash (Pty) Ltd.), which extracts 2400 m³ of brine/h from a depth of 38 m. Notable is the decrease in TDS as the pumping rate increases which may be indicative of subsurface recharge by less saline water. Isotope chemistry for Sr (⁸⁷Sr/⁸⁶Sr average 0.722087) and S (δ³⁴S average 34.35) suggests subsurface brines have been subject to a lithological contribution of undetermined origin. Recharge of the subsurface brine from surface water including the Nata River appears to be negligible.     

Environmental overview of Eckernförde Bay,northern Germany

This environmental overview of Eckernförde Bay (northern Germany) summarizes the results of previous studies relevant to the Office of Naval Research's Coastal Benthic Boundary Layer (CBBL) Baltic field exercise conducted during 1993–1994. Significant environmental characteristics include the following: (1) surface sediment distribution is related to water depth, dictated primarily by hydrodynamic reworking of older glacial deposits; (2) the origin and characteristics of small-scale sedimentary structures depend on storm-generated waves and currents; (3) the proximity of the sea surface and sediment —water interface results in a pelagic—benthic coupling that drives biogeochemical processes and produces organicrich, acoustically turbid sediments; and (4) the bay floor is complicated topographically by pockmarks and manmade sedimentary structures.     

Beyond the impasse: the power of political ecology in Third World environmental research

Summary In the context of a deepening impasse in Third World environmental research, this paper suggests that researchers should adopt a political ecology perspective to ensure that research addresses the political and economic issues that underlie the Third World's environmental problems. Since an understanding of unequal power relations is central to political ecology, the paper considers how questions of power influence human-environmental interaction, before assessing briefly how research of this kind might contribute to a resolution of the Third World's environmental problems.     

The multiple chronological techniques applied to the Lake Suigetsu SG06 sediment core,central Japan

The varved sediment of Lake Suigetsu (central Japan) provides a valuable opportunity to obtain high‐resolution, multi‐proxy palaeoenvironmental data across the last glacial/interglacial cycle. In order to maximize the potential of this archive, a well‐constrained chronology is required. This paper outlines the multiple geochronological techniques being applied – namely varve counting, radiocarbon dating, tephrochronology (including argon–argon dating) and optically stimulated luminescence (OSL) – and the approaches by which these techniques are being integrated to form a single, coherent, robust chronology. Importantly, we also describe here the linkage of the floating Lake Suigetsu (SG06) varve chronology and the absolute (IntCal09 tree‐ring) time scale, as derived using radiocarbon data from the uppermost (non‐varved) portion of the core. This tie‐point, defined as a distinct (flood) marker horizon in SG06 (event layer B‐07–08 at 1397.4 cm composite depth), is thus derived to be 11 255 to 11 222 IntCal09 cal. years BP (68.2% probability range).     

Last interglacial sea levels on the south coast of New South Wales

Remnants of the Last Interglacial shoreline occur at Middle Lagoon on the far south coast of New South Wales. Relict beach sediments can be traced to a height of at least +4.8 m and are indicative of a former mean sea level of about +3 m. Thermoluminescence (TL) ages of 126 ± 13 ka and 114 ± 15 ka were determined for beach and aeolian facies respectively. Sands in the lower part of an exposure on the adjacent Gillards Beach gave TL ages of 108 ± 13 ka, but sands in the upper part of that exposure gave an age of 19.9 ± 3.5 ka. This chronological evidence of a stratigraphic unconformity in what was initially taken as pedogenic differentiation at Gillards Beach is supported by contrasting electron traps and colour centres in crystal lattices of quartz grains in these two samples. No tectonic displacement is apparent. This site provides the first evidence of the Last Interglacial sea level for 1000 km along the coast between Gippsland and Newcastle.     

Seismic fragility methodology for highway bridges using a component level approach

Bridge fragility curves, which express the probability of a bridge reaching a certain damage state for a given ground motion parameter, play an important role in the overall seismic risk assessment of a transportation network. Current analytical methodologies for generating bridge fragility curves do not adequately account for all major contributing bridge components. Studies have shown that for some bridge types, neglecting to account for all of these components can lead to a misrepresentation of the bridges' overall fragilities. In this study, an expanded methodology for the generation of analytical fragility curves for highway bridges is presented. This methodology considers the contribution of the major components of the bridge, such as the columns, bearings and abutments, to its overall bridge system fragility. In particular, this methodology utilizes probability tools to directly estimate the bridge system fragility from the individual component fragilities. This is illustrated using a bridge whose construction and configuration are typical to the Central and Southeastern United States and the results are presented and discussed herein. This study shows that the bridge as a system is more fragile than any one of the individual components. Assuming that the columns represent the entire bridge system can result in errors as large as 50% at higher damage states. This provides support to the assertion that multiple bridge components should be considered in the development of bridge fragility curves. The findings also show that estimation of the bridge fragilities by their first‐order bounds could result in errors of up to 40%. Copyright © 2006 John Wiley & Sons, Ltd.     

Composition of the Descartes region,lunar highlands

Analytical data for 40 elements are reported for Apollo 16 soils 60601, 61181, 61501, 64801, 67701, 68501, 65701 and breccias 60015, 60017, 60018, 60315, 61016, 61175, 65015 and 66055. The soils are uniform except for the North Ray Crater rim sample which is richer in Al₂O₃.The breccia components show great diversity in composition. Low-K Fra Mauro basalt, Highland basalt (anorthositic gabbro) and plagioclase are important constituents. Medium-K Fra Mauro basalt is an important constituent of breccias 65015 and 60315.The breccias contain many meteorite fragments and high nickel contents, evidence of the early highland bombardment.Most of the refractory elements (REE, Th, U, Zr, Hf, Nb, Ba) show strong positive correlations, interpreted as resulting from mixing. The REE patterns of the breccias show extreme variation relative to chondrites. There is a good inverse correlation between REE and the europium anomaly ($\text{Eu}\text{Eu}{}^{\mathrm{x}}$). The $\text{La}\text{Yb}$ ratio is constant at 3.1 except in plagioclase. Eu depletion or enrichment is interpreted as due to addition or removal of plagioclase.The Cayley and Descartes formations cannot be distinguished chemically and the differences in surface expression are not due to chemical distinctions. They are interpreted as structural differences, related to early highland cratering and mare basin formation.The complex soil and breccia compositions are related to mixing of four components. These are Low-K Fra Mauro basalt, Highland basalt (anorthositic gabbro) and subordinate plagioclase and Medium-K Fra Mauro basalt. These compositions have been used in a computer program (PETMIX III) to provide fits for the analytical data in terms of the end-members.An average highland composition is proposed, based on the Apollo 15 and 16 orbital data for Si, Al, Mg and Th. Abundances for most other elements are derived from the interelement relationships and correlations, and checked by the mixing program.The resulting composition consists of 69 per cent Highland basalt (anorthositic gabbro) and 31 per cent Low-K Fra Mauro basalt. There is no significant Eu anomaly. The abundances are: SiO₂: 45.2 per cent; TiO₂: 0.68 per cent; Al₂O₃: 24.9 per cent; FeO: 6.3 per cent; MgO: 8.5 per cent; CaO: 13.8 per cent; Na₂O: 0.4 per cent; K₂O: 0.11 per cent; Cr₂O₃: 0.11 per cent; Ba: 144 ppm; Th: 1.8 ppm; U: 0.46 ppm; Pb: 1.6 ppm; Zr: 156 ppm; Hf: 3.2 ppm; Nb: 10.8 ppm; Y: 32 ppm; ΣREE: 85 ppm.