Distribution of moderately volatile trace elements in fine-grained chondrule rims in the unequilibrated CO3 chondrite, ALH A77307

The concentrations of Ni, Cu, Zn, Ga, Ge, and Se in five, fine-grained chondrule rims in the highly unequilibrated CO3 chondrite ALH A77307 (3.0) have been determined for the first time by synchrotron X-ray fluorescence (SXRF) microprobe at Brookhaven National Laboratory. These elements are especially useful for tracing the role of condensation and evaporation processes which occurred at moderate temperatures in the solar nebula. Understanding the distribution of moderately volatile elements between matrix and chondrules is extremely important for evaluating the different models for the volatile depletions in chondritic meteorites. The data show that the trace element chemistry of rims on different chondrules is remarkably similar, consistent with data obtained for the major and minor elements by electron microprobe. These results support the idea that rims are not genetically related to individual chondrules, but all sampled the same reservoir of homogeneously mixed dust. Of the trace elements analyzed, Zn and Ga show depletions relative to CI chondrite values, but in comparison with bulk CO chondrites all the elements are enriched by approximately 1.5 to 3.5 x CO. The abundance patterns for moderately volatile elements in ALH A77307 chondrule rims closely mimic those observed in the bulk chondrite, indicating that matrix is the major reservoir for these elements. The close matching of the patterns for the volatile depleted bulk chondrite and enriched matrix is especially striking for Na, which is anomalously depleted in ALH A77307 in comparison with average CO chondrite abundances. The depletion in Na is probably attributable to the effects of leaching in Antarctica. With the exception of Na, the volatile elements show a relatively smooth decrease in abundance as a function of condensation temperature, indicating that their behavior is largely controlled by their volatility.     

Limiting the soil degradational impacts of wildfire in pine and eucalyptus forests in Portugal: A comparison of alternative post-fire management practices

In newly burnt and unburnt pine and eucalyptus forest in Portugal, overland flow and soil losses were monitored to assess the impacts of the following post-fire treatments: application of different quantities of logging litter; rip-ploughing compared with minimum tillage prior to planting eucalyptus seedlings; and clearance of pine needles and vegetation. Eucalyptus logging litter reduced soil losses by up to 95 per cent. The impact of pine logging litter was equivocal, but removal of pine needles increased soil losses elevenfold. Implications for soil longevity, soil quality and land management strategy are discussed.     

A simple parameterization of sub-grid scale open water for climate models

The effects of small fractions ( < 30%) of open water covering a grid element are currently neglected even in atmospheric general circulation models (AGCMs) which incorporate complex land surface parameterization schemes. Here, a method for simulating sub-grid scale open water is proposed which permits any existing land surface model to be modified to account for open water. This new parameterization is tested as an addition to an advanced land surface scheme and, as expected, is shown to produce general increases in the surface latent heat flux at the expense of the surface sensible heat flux. Small changes in temperature are associated with this change in the partitioning of available energy which is driven by an increase in the wetness of the grid element. The sensitivity of the land surface to increasing amounts of open water is dependent upon the type of vegetation represented. Dense vegetation (with a high leaf area index) is shown to complicate the apparently simple model sensitivity and indicates that more advanced methods of incorporating open water into AGCMs need to be considered and compared against the parameterization suggested here. However, the sensitivity of one land surface model to incorporating open water is large enough to warrant consideration of its incorporation into climate models.     

Pressure dependence of melt viscosities on the join diopside-albite

The pressure dependence of melt viscosities on the join diopside-albite has been studied using falling-sphere viscometry. The five melt compositions investigated are: diopside, Ab₂₅Di₇₅, Ab₅₀Di₅₀, Ab₇₅Di₂₅ and albite. Experiments were performed at 1500° and 1600°C and at pressures of 5, 10, 15, 20 and 25 kbar. The positive and negative pressure dependence of the viscosity of diopside and albite, respectively, were confirmed. All intermediate compositions show an initial decrease in viscosity with increasing pressure; however, melt of Ab₂₅Di₇₅ composition passes through a minimum viscosity at approximately 12 kbar and 1600°C. This behavior is analogous to the variation in the viscosity of water with pressure at low temperature.

It is suggested that the three-dimensional, fully polymerized, albite structure dominates flow at low pressures. With increasing pressure, disruption of this structure and decrease in the average size of the flow units leads to domination by the diopside structure. The variation in viscosity with composition along the join at one atmosphere can be adequately modelled using the and (1965) configurational entropy model with an additional two-lattice configurational entropy of mixing term. The pressure dependence of viscosity in the diopside-albite system, however, cannot be predicted by the model, because there is an absence of information on the pressure dependence of the model parameters.

It is probable that relatively polymerized magmas (e.g. rhyolites to SiO₂-saturated basalts) show a negative pressure dependence of viscosity to depths where they originate in the lower crust or upper mantle. In contrast, the most depolymerized, naturally-occurring melts, such as strongly SiO₂-undersaturated basalts and picrites, may exhibit a viscosity minimum. The viscosity of these melts may be sufficiently high at depths within the upper mantle to inhibit their segregation, rise and eventual eruption at the surface.     

Early solar system processes recorded in the matrices of two highly pristine CR3 carbonaceous chondrites, MET 00426 and QUE 99177

The mineralogy and bulk compositions of the matrices of the CR chondrites MET 00426 and QUE 99177 have been studied using a combination of SEM, EPMA, and TEM techniques. The matrices of these two chondrites are texturally, chemically, and mineralogically similar and are characterized by significant FeO-enrichments with respect to other CR chondrite matrices, nearly flat refractory lithophile patterns, variable volatile element patterns, and a simple mineral assemblage dominated by amorphous silicate material and Fe,Ni sulfides. Fine-grained, crystalline silicate phases such as olivine and pyroxene appear to be extremely rare in the matrices of both meteorites. Instead, the mineralogy of matrices and fine-grained rims of both meteorites consists of abundant amorphous FeO-rich silicate material, containing nanoparticles of Fe,Ni sulfides (troilite, pyrrhotite, and pentlandite). Secondary alteration minerals that are characteristic of other CR chondrites (e.g., Renazzo and Al Rais), such as phyllosilicates, magnetite, and calcite are also rare. The texture and mineralogy of the matrices of MET 00426 and QUE 99177 share many features with matrices in the primitive carbonaceous chondrites ALH A77307 (CO3.0) and Acfer 094 (unique). These observations show that MET 00426 and QUE 99177 are very low petrologic type 3 chondrites that have escaped the effects of aqueous alteration, unlike other CR chondrites, which are typically classified as petrologic type 2. We suggest that these meteorites represent additional samples of highly primitive, but extremely rare carbonaceous chondrites of petrologic type 3.00, according to the classification scheme of Grossman and Brearley (2005). The highly pristine nature of MET 00426 and QUE 99177 provides important additional insights into the origins of fine-grained materials in carbonaceous chondrites. Based on our new observations, we infer that the amorphous silicate material and nanosulfide particles that dominate the matrices of these meteorites formed in the solar nebula by rapid condensation of material following high-temperature events, such as those that formed chondrules.     

An in situ investigation of the preservation and alteration of presolar silicates in the Miller Range 07687 chondrite

Dust grains that formed around ancient stars and in stellar explosions seeded the early solar protoplanetary disk. While most of such presolar grains were destroyed during solar system formation, a fraction of such grains were preserved in primitive materials such as meteorites. These grains can provide constraints on stellar origins and secondary processing such as aqueous alteration and thermal metamorphism on their parent asteroids. Here, we report on the nature of aqueous alteration in the Miller Range (MIL) 07687 chondrite through the analysis of four presolar silicates and their surrounding material. The grains occur in the Fe-rich and Fe-poor lithologies, reflecting relatively altered and unaltered material, respectively. The O-isotopic compositions of two grains, one each from the Fe-rich and Fe-poor matrix, are consistent with formation in the circumstellar envelopes of low-mass Asymptotic Giant Branch (AGB)/Red Giant Branch (RGB) stars. The other two grains, also one each from the Fe-rich and Fe-poor matrix, have O-isotopic compositions consistent with formation in the ejecta of type-II supernovae (SNe). The grains derived from AGB/RGB stars include two polycrystalline pyroxene grains that contain Fe-rich rims. The SNe grains include a polycrystalline Ca-bearing pyroxene and a polycrystalline assemblage consistent with a mixture of olivine and pyroxene. Ferrihydrite is observed in all focused ion beam sections, consistent with parent-body aqueous alteration of the fine-grained matrix under oxidizing conditions. The Fe-rich rims around presolar silicates in this study are consistent with Fe-diffusion into the grains resulting from early-stage hydrothermal alteration, but such alteration was not extensive enough to lead to isotopic equilibration with the surrounding matrix.     

Compositions and microstructures of CB sulfides: Implications for the thermal history of the CB chondrite parent body

We studied textures and compositions of sulfide inclusions in unzoned Fe,Ni metal particles within CBa Gujba, CBa Weatherford, CBb HH 237, and CBb QUE 94411 in order to constrain formation conditions and secondary thermal histories on the CB parent body. Unzoned metal particles in all four chondrites have very similar metal and sulfide compositions. Metal particles contain different types of sulfides, which we categorize as: homogeneous low‐Cr sulfides composed of troilite, troilite‐containing exsolved daubreelite lamellae, arcuate sulfides that occur along metal grain boundaries, and shock‐melted sulfides composed of a mixture of troilite and Fe, Ni metal. Our model for formation proposes that the unzoned metal particles were initially metal droplets that formed from splashing by a partially molten impacting body. Sulfide inclusions later formed as a result of precipitation of excess S from solid metal at low temperatures, either during single stage cooling or during a reheating event by impacts. Sulfides containing exsolution lamellae record temperatures of ?600 °C, and irregular Fe‐FeS intergrowth textures suggest localized shock melting, both of which are indicative of heterogeneous heating by impact processes on the CB parent body. Our study shows that CBa and CBb chondrites formed in a similar environment, and also experienced similar secondary impact processing.     

Widespread hydrothermal alteration minerals in the fine‐grained matrices of the Tieschitz unequilibrated ordinary chondrite

Mineralogic, textural, and compositional studies of black and white matrices in the unequilibrated ordinary chondrite Tieschitz (H/L, 3.6) show, for the first time in an ordinary chondrite, the presence of widespread, randomly distributed geode‐like voids and veins. Scanning electron microscope (SEM) and transmission electron microscope (TEM) studies show that these voids and veins are partially or completely filled by sodic–calcic amphiboles (winchite and barroisite). The occurrence of amphiboles provides unequivocal evidence of the involvement of fluids in the metamorphic evolution of the parent body of Tieschitz. The presence of amphiboles as the main hydrous phases, rather than phyllosilicates, indicates that aqueous fluids were present at or close to the peak of thermal metamorphism, rather than during the waning stages of the cooling history of the parent body. In addition, ferrous olivine crystals, in association with the amphibole, also establish an important link between thermal metamorphism and hydrous phases formed at high temperatures. Mineralogic and textural evidence suggests that the white matrix and amphibole formed contemporaneously from the same hydrous fluid, prior to the formation of ferrous olivine crystals. Additionally, a dark inclusion identified in the host chondrite has mineralogic, petrologic, and bulk chemical characteristics that are similar to the black matrix of host Tieschitz, suggesting that this dark inclusion was emplaced before or during parent body metamorphism.     

Occurrence and possible significance of rare Ti oxides (Magnéli phases) in carbonaceous chondrite matrices

Abstract— Rare, ultrafine-grained Ti oxides (Ti₃O₅ and the Magnéli phases, Ti₅O₉ and Ti₈O₁₅) have been identified by transmission electron microscopy in the CM2 carbonaceous chondrite, Bells and a carbonaceous chondrite matrix clast from the Nilpena polymict ureilite. In both meteorites the Ti oxides occur in the matrix as isolated grains and clusters of two or more grains. They are euhedral in shape and have grain sizes of 0.05–0.3 μm. Magnéli phases have been recently shown to be a common component in some interplanetary dust particles, but this is the first reported occurrence in a meteorite. The morphological properties and grain size of the Ti oxides are consistent with formation by vapor phase condensation either within the solar nebula or possibly in a presolar environment.     

New observations on high‐pressure phases in a shock melt vein in the Villalbeto de la Peña meteorite: Insights into the shock behavior of diopside

The petrology and mineralogy of shock melt veins in the L6 ordinary chondrite host of Villalbeto de la Peña, a highly shocked, L chondrite polymict breccia, have been investigated in detail using scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and electron probe microanalysis. Entrained olivine, enstatite, diopside, and plagioclase are transformed into ringwoodite, low‐Ca majorite, high‐Ca majorite, and an assemblage of jadeite‐lingunite, respectively, in several shock melt veins and pockets. We have focused on the shock behavior of diopside in a particularly large shock melt vein (10 mm long and up to 4 mm wide) in order to provide additional insights into its high‐pressure polymorphic phase transformation mechanisms. We report the first evidence of diopside undergoing shock‐induced melting, and the occurrence of natural Ca‐majorite formed by solid‐state transformation from diopside. Magnesiowüstite has also been found as veins injected into diopside in the form of nanocrystalline grains that crystallized from a melt and also occurs interstitially between majorite‐pyrope grains in the melt‐vein matrix. In addition, we have observed compositional zoning in majorite‐pyrope grains in the matrix of the shock‐melt vein, which has not been described previously in any shocked meteorite. Collectively, all these different lines of evidence are suggestive of a major shock event with high cooling rates. The minimum peak shock conditions are difficult to constrain, because of the uncertainties in applying experimentally determined high‐pressure phase equilibria to complex natural systems. However, our results suggest that conditions between 16 and 28 GPa and 2000–2200 °C were reached.