Review on InSAR based displacement monitoring of Indian Himalayas: issues,challenges and possible advanced alternatives

Natural and man-made disasters like earthquakes, landslides, avalanches, unplanned mining are some of the most serious factors responsible for earth surface displacement. These incidences can be harmful for the society due to loss of life and also threatful for future urban development. Therefore, continuous monitoring of disasters in terms of displacements is of fundamental importance in a modern well-organized society to understand its effects on the social and economic fabric. Availability of SAR data has been proved to be an excellent source for estimation of surface displacements with high accuracies. However, in India, SAR interferometry-related displacement measurement has still not gained appreciable momentum. More rigorous research needs to be carried out for the efficient use of this new generation technique. This review article is an attempt to discuss the issues related to SAR-based displacement studies so far conducted on Indian Himalayan region and possible advanced alternatives.     

Bathymetry Data Correction Using Global Optimization Method

The bathymetry data of marine bodies have been collected over a century, and the collected data have a wide range of resolution and accuracy. Acquisition of bathymetry data is very costly and time-consuming. One can use the old, low-quality bathymetry data to fill the gap in high-quality, recently acquired bathymetry data after correcting the old data to improve its quality so that it is comparable to the high-quality data. The old data correction can be treated as a nonlinear inverse problem. Simulated annealing (SA) global optimization method was used here in solving this problem. The two sets of data that were used are project survey (PS) and Vietnamese Navy Chart (VNC) data. The PS data were collected in 2000 in an offshore survey from the Vietnam coast in the South China Sea (SCS). The VNC data were obtained by digitizing VNC that was published in 1981. Inverse distance weighted (IDW) interpolation method was used for forward modeling. Weperformed the SA algorithm run starting at a high "temperature," then lowering the "temperature" gradually up to the "critical temperature" and then staying there for the rest of the run. The best model chosen by the algorithm showed an improvement of 63% from the original model. We then constructed a digital bathymetry model (DBM) of the study area with the combined corrected VNC and the PS data.     

Primary sedimentary structures and MISS in Gulcheru quartzite along SW part of Cuddapah basin

Sedimentary structures are very useful in paleocurrent analysis and interpretation of siliciclastic shallow marine environment. These interesting sedimentary structures such as parallel bedding, cross bedding, ripples, and mud cracks as well as synaeresis cracks, are best studied in the field. They are formed by a variety of sedimentary processes, including fluid flow, sediment-gravity flow, soft-sediment deformation and biogenic activity. Gulcheru Formation has evidence of interaction of microbial communities with clastic sedimentation during Palaeoproterozoic time. Because of high porosity-permeability of siliciclastics of Gulcheru Formation, palaeontologists do not expect many fossils preserved in such rocks and thus they have been overlooked. Microbially induced sedimentary structures (MISS) are highlighted in the Gulcheru Formation. They are indicative of shallow marine environment. Gulcheru Formation shows alluvial fan to shallow marine shelf environments within a limited thickness of about ~ 110m, which indicates an alluvial plain coast where alluvial deposits are modified by wave forces.     

Usefulness of adaptive filtering for improved Digital Elevation Model generation

The Digital Elevation Models (DEMs), which represent the variation of elevation in a terrain at spatial level, are an important source of input to a variety of applications for deriving a number of terrain parameters such as relative relief, slope, aspect direction etc. In recent years, Synthetic Aperture Radar Interferometry has been viewed as a powerful approach to derive quality DEMs from a pair of SAR images. Despite the interferometric technique is often limited by several de-correlations several researchers demonstrate its effectiveness in topographic mapping. The DEM accuracy is strongly influenced by the effectiveness of the phase unwrapping technique. In this study an effective adaptive filtering approach has been used to reduce the phase noise due to de-correlation and in improving the accuracy of phase unwrapping. Two well known phase unwrapping approaches such as branch cut and minimum cost flow network have been used. Interferometric data from ASAR sensor onboard ENVISAT satellite have been used. A highly undulated terrain condition near Dehradun city situated in Uttarakhand state of India was selected to investigate the performance of this adaptive filtering approach. The RMS error between the InSAR derived elevations and the map derived elevations was obtained as 7.2 m using adaptive filter. However, elevation map of the study area could not be generated due to high de-correlation effect without the use of adaptive filter. This result clearly demonstrates the effectiveness of adaptive filtering approach for generation of DEM at meter level accuracy, which is sufficient for many engineering applications.     

Surface displacement estimation along Himalayan frontal fault using differential SAR interferometry

The Himalayan region has been studied extensively during the past few decades in terms of present ongoing deformations. Various models have been proposed for the evolution of the Himalaya to explain the cause of earthquake occurrences and to understand the seismotectonics of the Himalayan collision zone. However, the information on displacements from field geodetic surveys is still too scarce in time and spatial domains so as to provide convincing evidences. Moreover, classical Probabilistic Seismic Hazard Approaches also fail due to paucity of data in higher magnitude range, thus emphasizing the need of spatial level displacement measurements. It is in this context that the present study has been carried out to estimate the surface displacement in a seismically active region of the Himalaya between Ganga and Yamuna Tear using Differential SAR interferometry. Three single-look complex images, obtained from ASAR sensor onboard ENVISAT satellite, have been used. A displacement rate of 8?C10?mm per year in N15°E direction of Indian plate has been obtained in this three-pass SAR interferometry study. It has been noted that the estimated convergence rate using Differential SAR interferometry technique is relatively low in comparison with those obtained from previous classical studies. The reported low convergence rate may be due to occurrence of silent/quite earthquakes, aseismic slip, differential movement of Delhi Hardwar ridge, etc. Therefore, in view of the contemporary seismicity and conspicuous displacements, a study of long-term observations of this surface movement has been recommended in future through a time-series SAR interferometry analysis.     

Bathymetry Data Correction Using Global Optimization Method

The bathymetry data of marine bodies have been collected over a century, and the collected data have a wide range of resolution and accuracy. Acquisition of bathymetry data is very costly and time-consuming. One can use the old, low-quality bathymetry data to fill the gap in high-quality, recently acquired bathymetry data after correcting the old data to improve its quality so that it is comparable to the high-quality data. The old data correction can be treated as a nonlinear inverse problem. Simulated annealing (SA) global optimization method was used here in solving this problem. The two sets of data that were used are project survey (PS) and Vietnamese Navy Chart (VNC) data. The PS data were collected in 2000 in an offshore survey from the Vietnam coast in the South China Sea (SCS). The VNC data were obtained by digitizing VNC that was published in 1981. Inverse distance weighted (IDW) interpolation method was used for forward modeling. Weperformed the SA algorithm run starting at a high "temperature," then lowering the "temperature" gradually up to the "critical temperature" and then staying there for the rest of the run. The best model chosen by the algorithm showed an improvement of 63% from the original model. We then constructed a digital bathymetry model (DBM) of the study area with the combined corrected VNC and the PS data.     

A Review of Shallow-Water Mapping Systems

In recent years shallow-water mapping systems have been developing rapidly for various applications of coastal, nearshore, and other shallow-water regions. Some systems can operate in only 0.5 m deep water, while the operating range of some systems is over 600 m depth. This article reviews the characteristics of nine shallow-water mapping systems developed by seven manufacturers. The design and the data collection methods of these systems are different from each other, and each has its advantage. Most of these systems have been tested in the real environment and are in use for various purposes around the world.