Attenuation relations for strong seismic ground motion in the Himalayan region

Strong motion data from various regions of India have been used to study attenuation characteristics of horizontal peak acceleration and velocity. The strong ground motion data base considered in the present work consists of various earthquakes recorded in the northern part of India since 1986 with magnitudes 5.7 to 7.2. Using these data, relations for horizontal peak acceleration and velocity, which are $$\begin{gathered} log_{10} a = 1.14 + 0.31M + 0.65log_{10} R \hfill \\ log_{10} v = 0.571 + 0.41M + 0.768log_{10} R \hfill \\ \end{gathered} $$ have been proposed wherea is the peak horizontal acceleration in cm/sec²,v is the peak horizontal velocity in mm/sec,M is body wave magnitude, andR is the hypocentral distance in km. The proposed relations are in reasonable agreement with the small amount of strong ground motion data available for the northern part of India. The present results will be useful in estimating strong ground motion parameters and in the earthquake resistant design in the Himalayan region.     

Ecological model analysis of respiratory health risk factors by ambient air pollution in Lucknow,the capital City of Uttar Pradesh,India

Ambient air pollution, particularly in the urban environment of developing countries, has turned out to be a major health risk factor. We explore the compounded impact of age sensitivity, exposure, poverty, co-morbidity, etc., along with composite air pollution in determining morbidity and health burden of people in Lucknow, India. This cross-sectional study is confined to analyse respiratory health status across different socio-economic and geographic locations using n = 140 in-depth questionnaire method. We used mean daily ambient air pollution data of PM₁₀, PM_2.5, SO_2, and NO₂ for the 2008–2018 period. We used the ecological model framework to assess the risk at different hierarchical levels and compounded severity on a spatial scale. We also used Logistic regression model with log odds and odds ratio to analyze the association of risks outcomes with composite air pollution scores calculated using the principal component analysis method. There is a strong association of location-specific respiratory disease prevalence with an overall 32 percent prevalence. The prevalence of ecological model 1 (individual domain) is 4.3 percent, while ecological model 2 (community domain) has the highest prevalence at 32.4 percent. The logistic regression model shows that respiratory disease load is positively associated with age sensitivity (P < .001) and composite pollution level (P < .001). For another model with suffocation as the outcome variable, composite pollution level (P < .001) and exposure (P < .001) are positively associated. Optimum interventions are required at Ecological models 1, 2, and 3 levels for better respiratory health outcomes.

     

Numerical modelling of rheological properties of landslide debris

Debris flow has caused severe human casualties and economic losses in landslide-prone areas around the globe. A comprehensive understanding of the morphology and deposition mechanisms of debris flows is crucial to delineate the extent of a debris flow hazard. However, due to inherent complex field topography and varying compositions of the flowing debris, coupled with a lack of fundamental understanding about the factors controlling the geomaterial flow, interparticle interactions and its final settlement resulted in a limited understanding of the flow behaviour of the landslide debris. In this study, a physical model was set up in the laboratory to simulate and calibrate the debris flow using PFC, a distinct element modelling-based software. After calibration, a case study of the Varunavat landslide was taken to validate the developed numerical model. Following validation with an acceptable level of confidence, several models were generated to evaluate the effect of slope height, slope angle, slope profile, and grain size distribution of the dislodged geomaterial in the rheological properties of debris flow. Both qualitative and quantitative analysis of the landslide debris flow was performed. Finally, the utility of retaining wall and their effect on debris flow is also studied with different retaining wall positions along the slope surface.

     

Is tidal forcing critical to trigger large Sumatra earthquakes?

Complexity in the earthquake mechanism is manifested in different forms such as fractal distribution, clustering of seismicity, etc., and characterized as critical phenomenon. Occurrences of earthquakes generally represent the state of metastable equilibrium. The Andaman–Sumatra subduction zone is one of the most seismically active corridors (possibly in metastable state) in the world. Recently, the region faced three major earthquakes of magnitude more than 8.5 (M ~ 9.1 on December 26, 2004; M ~ 8.6 on March 28, 2005; M ~ 8.6 on April 11, 2012). Researchers have suggested multiple causes of earthquake generation in this region including the one with possible correlation of tidal stresses with earthquake occurrences. The latter issue, however, has been hotly debated in view of the fact that a small stress generated due to tidal forcing cannot cause such a bigger magnitude earthquake. We study here the impact of tidal forcing on critically generated earthquake phenomena. We examined the statistical behavior of recurrence time interval of earthquakes using the available data for period of about 40 years from 1973 to 2013. We constrain the simple empirical toy model using the concept of catastrophe theory to evaluate the impact of small tidal forcing on the critical state of earthquakes occurrences. In addition to the major role of Helmholtz free energy during the plate motion, our analysis suggests that the stability and critical behavior of the earthquake in Sumatra region could be associated with tidal forcing, however, only for triggering of some of the “Catastrophic–Chaotic” earthquake phenomenon.     

General class of Bianchi cosmological models with Λ in creation-field cosmology

The solutions of Einstein’s equations with cosmological constant (Λ) in the presence of a creation field have been obtained for general class of anisotropic cosmological models. We have obtained the cosmological solutions for two different scenarios of average scale factor. In first case, we have discussed three different types of physically viable cosmological solutions of average scale factor for the general class of Bianchi cosmological models by using a special law for deceleration parameter which is linear in time with a negative slope. In second case, we have discussed another three different forms of cosmological solutions by using the average scale factor in three different scenarios like Intermediate scenario, Logamediate scenario and Emergent scenario. All physical parameters are calculated and discussed in each physical viable cosmological model. We examine the nature of creation field and cosmological constant is dominated the early Universe but they do not survive for long time and finally tends to zero for large cosmic time t. We have also discussed the all energy conditions in each cases.     

Television drama and the urban diegesis: portraying Albuquerque in Breaking Bad

Albuquerque, New Mexico is the filming location and setting of the popular television drama Breaking Bad (2008–2013). Albuquerque is not merely a passive backdrop to the action in the show but a focal point of the series. So much so that in the geographical imaginations of many, Albuquerque and Breaking Bad have become synonymous with each other. This paper critically examines the representation of urban life within the show. To do this it draws upon and expands the existing multi-disciplinary literature on cities and films/television. As well as focusing on the influence of setting and filming the show in Albuquerque on the urban diegesis (i.e. the on-screen city), it also examines three visions of Albuquerque that are projected through the show: (1) Albuquerque as a crime-ridden city; (2) Albuquerque as a spatially divided city; and (3) Albuquerque as a city to escape from.     

A multi-isotope approach (O,H, C,S, B and Sr) to understand the source of water and solutes in some the thermal springs from West Coast geothermal area,India

The West Coast belt, consisting of nearly 60 thermal springs, is one of the most diversified geothermal fields in India. The present work describes the multi-isotopic (O, H, C, S, B and Sr) characterization of thermal waters carried out in the Tural-Rajwadi geothermal field, situated in southern sector of the west coast geothermal area. The aim of this study is to delineate the origin of thermal water as well as to ascertain the sources of carbon, sulphur, boron and strontium dissolved in those thermal springs. The stable isotopes (δ²H and δ¹⁸O) and tritium data indicate that these thermal springs are not recently recharged rain water rather, it contains very old component of water. Oxygen-18 shift is observed due to rock-water interaction over a long period of time. Carbon isotopic composition of DIC points out to the silicate weathering with soil CO₂ coming from C₃ type of plants whereas δ³⁴S of dissolved sulphate confirms the marine origin of sulphate. This marine signature is basically derived from paleo-seawater possibly entrapped within the flows. Boron isotopic data reveals that both the seawater and rock dissolution are the sources of boron in the thermal waters whereas high ⁸⁷Sr/⁸⁶Sr ratios (0.7220–0.7512) of the thermal waters conclusively establishes that archean granitic basement is the predominant rock source of strontium, not the Deccan flood basalts. In addition, like strontium, concentrations of lithium, rubidium and caesium are also governed by the rock-water interaction. Thus, the combined use of this multi-isotope technique coupled with trace element concentrations proves to be an effective tool to establish the sources of solutes in the thermal water.     

A simplified methd of evaluating the seismic performance of buildings

This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.