The influence of macrophyte growth,typical of eutrophic conditions,on river flow velocities and turbulence production

The influence of emergent and submerged macrophytes on flow velocity and turbulence production is demonstrated in a 140 m reach of the River Blackwater in Farnborough, Hampshire, UK. Macrophyte growth occurs in patches and is dominated by Sparganium erectum and Sparganium emersum. In May 2001, patches of S. erectum were already established and occupied 18% of the channel area. The flow adjusted to these (predominantly lateral) patches by being channelled through a narrower cross‐section. The measured velocity profiles showed a logarithmic form, with deviations attributable to topographic control. The channel bed was the main source of turbulence. In September 2001, in‐stream macrophytes occupied 27% of the channel, and overhanging bank vegetation affected 32% of the area. Overall flow resistance, described by Manning's n, showed a threefold increase that could be attributed to the growth of S. emersum in the middle of the channel. Velocity profiles showed different characteristic forms depending on their position relative to plant stems and leaves. The overall velocity field had a three‐dimensional structure. Turbulence intensities were generally higher and turbulence profiles tended to mirror the velocity profiles. Evidence for the generation of coherent eddies was provided by ratios of the root mean square velocities. Spectral analysis identified deviations from the Kolmogorov ?5/3 power law and provided statistical evidence for a spectral short‐cut, indicative of additional turbulence production. This was most marked for the submerged vegetation and, in some instances, the overhanging bank vegetation. The long strap‐like leaves of S. emersum being aligned approximately parallel to the flow and the highly variable velocity field created by the patch arrangement of macrophytes suggest that the dominant mechanism for turbulence production is vortex shedding along shear zones. Wake production around individual stems of S. emersum close to the bed may also be important locally. Copyright © 2006 John Wiley & Sons, Ltd.     

A Lagrangian model for wind- and wave-induced near-surface currents

A theory is outlined for time-dependent currents induced near the sea surface in deep water, away from coastal boundaries, by a variable wind stress and deep-water wave field. It is based on the theory of Weber (1983) which uses a second-order perturbation expansion of the Navier-Stokes equations in Lagrangian coordinates and includes the Coriolis effect. It uses an eddy viscosity formulation for both wave dissipation and momentum transfer within the current field: the eddy viscosity ν may be allowed to vary with depth. The wind stress may be time-varying and the wave field may vary in both space and time.For the case of a constant ν, the results agree with those of Ursell (1950), Hasselmann (1970) and Pollard (1970) in the limit ν→0, and the steady-state results agree with those of Weber. For a particular case of depth-varying ν, results (obtained from numerical simulations) are in better general agreement with observations of wind-induced surface drift than when a constant ν is used.An outline is given of the application of the theory to the case of a random sea state. There are good prospects for using output data from numerical wave prediction models to drive the equations of this near-surface current model.     

Deep sea navigation techniques

Accurate navigation forms an essential part of all research at sea and the deep ocean imposes it's own unique problems. This chapter discusses several of the techniques in current use on the research vessels of the Natural Environment Research Council (NERC), concentrating on those systems which provide global navigation facilities, as opposed to the more localised, coastal aids. Whilst most of the systems rely on surface propagation of radio waves, the use of acoustics and sea-bed mapping instruments constitute accurate alternatives for some sub-sea applications.     

两株琼胶酶高产细菌的筛选和鉴定

从海洋环境中筛选得到两株琼胶酶的高产菌株，通过形态观察和生理生化反应，确定它们属于弧菌属，通过BIOLOG细菌鉴定系统鉴定，并同弧菌属标准菌株分析比较，确定上方宝剑两株菌都是塔式弧菌（Vibrio tubiashii)，这两株菌在碳源利用方面存在差别。     

Recruitment patterns of Serpula vermicularis L. (Polychaeta, Serpulidae) in Loch Creran, Scotland

This study aimed to contribute to conservation management of reefs of Serpula vermicularis by increasing understanding of the factors influencing larval settlement. The study was carried out in Loch Creran, which supports the most extensive known development of S. vermicularis reefs in the world. Settlement plates were deployed to examine the influence of season, depth, reef density, substrate type and orientation. Monthly deployment of plates revealed settlement of S. vermicularis to occur predominantly from mid-June to mid-October, peaking in late August to early September. Settlement of Pomatoceros spp. peaked much earlier, in late May to early June. Deployment of plates at different depths revealed a marked reduction in S. vermicularis settlement intensity between 6 and 12 m. As this corresponds with the deeper limit of the peripheral fringe of serpulid reefs in the loch, it is suggested that this limit is imposed by a depth-correlated settlement response, rather than reduction in available substrata. Comparisons of various substrata showed a preference by S. vermicularis larvae for a slate over a scallop substrate and no evidence of enhanced recruitment to occupied or unoccupied tubes of S. vermicularis, suggesting that gregarious attraction is unlikely to be a factor causing reef formation. Settlement onto the upper side of a horizontal scallop substrate was found to be insignificant in comparison with the underside or a vertically orientated scallop. Evidence for the role of light in controlling the depth and substrate-orientation preferences of S. vermicularis larvae is discussed. Based on the results of this study, recommendations are made regarding remediation of areas suffering reef damage.     

Geochemistry and palaeo-oceanography of metalliferous and pelagic sediments from the Late Cretaceous Oman ophiolite

Metalliferous and pelagic sediments are exposed within and above the extrusive successions of the Upper Cretaceous Oman ophiolite which, on the basis of mostly geochemical evidence, is believed to have formed in an incipient marginal basin setting located above a NE-dipping subduction zone. The ophiolitic extrusives document various volcano-tectonic settings which include the axial zones of a spreading ridge, fault-controlled seamounts and off-axis volcanic edifices. Most of the Fe, Mn and trace metal-enriched sediments studied are interpreted as precipitates formed by oxidation of solutions derived from high-temperature sulphide-precipitating vents. The trace element content (e.g. REE and Sr) was largely scavenged from seawater. The sediments are similar to the dispersed metalliferous sediments on the flanks of modern spreading ridges, and the ‘basal’ sediments of DSDP wells and of other ophiolite complexes (e.g. Troodos, Cyprus).Distinctive mound structures located low in the lavas are attributed to percolation of sulphide-rich solutions into already deposited metalliferous oxide sediments. The resulting iron-silica rock was probably originally precipitated as ferruginous silicates.Major massive sulphides formed off-axis at the base of intermediate-basic edifices of volcanic arc affinities. Fe, Mn and trace metal enrichment in the sediment cover of a flat-topped seamount of axial lavas is interpreted as a dispersion halo around the largest massive sulphide orebody which is situated 5 km away (Lasail). Small massive sulphide bodies are common in the axial lavas particularly along major seafloor fault zones. The metalliferous sediments, locally precipitated near these vents, are ferromanganiferous, but trace metal-depleted.The metalliferous and pelagic sediment cover of the extrusive successions, generally, documents waning hydrothermal input after volcanism ended in the area.A model is discussed in which the ophiolite was created at a spreading axis above a subduction zone dipping away from the Arabian continental margin. With progressive subduction this crust approached the margin. Initially, calcareous sediment accumulated above the calcite compensation depth (CCD), but then non-calcareous radiolarites were deposited as the ophiolitic crust approached the continental margin where the CCD was higher and marginal upwelling possibly enhanced productivity. As the edge of the Arabian continental margin entered the trench, the over-riding ophiolite was regionally uplifted allowing short-lived chalk accumulation above the CCD. This was followed by volcaniclastic deposition related to the tectonic emplacement.     

Carbon stable isotopes in estuarine sediments and their utility as migration markers for nursery studies in the Firth of Forth and Forth Estuary, Scotland

The stable carbon isotope ratios (δ¹³C) of the organic fraction of intertidal sediments in the Forth Estuary and the Firth of Forth, Scotland, were measured to determine if terrestrially derived carbon was present in the estuarine sediments. It was hypothesised that differences in the inputs from marine vs. terrestrial sources to the organic carbon of estuarine and marine sediments, as well as differences in ambient seawater stable oxygen isotope (δ¹⁸O) ratios between the estuary and the Outer Firth, would allow the use of these two stable isotopes as habitat markers for juvenile plaice (Pleuronectes platessa), to allow determination of nursery habitats. Muddy and sandy sediments from the estuary and sandy sediments from the Outer Firth were sampled and δ¹³C measured. Juvenile plaice were caught at two estuarine sites and at two Outer Firth sites and otoliths were removed for δ¹³C and δ¹⁸O analysis. The sandy sediments in the estuary showed a strong gradient of δ¹³C enrichment with distance down the estuary, while the muddy sediments showed a much shallower gradient. δ¹³C and δ¹⁸O measured in the carbonate of juvenile plaice otoliths showed no clear difference between otoliths of fish caught at one of the estuarine sites and at the two Outer Firth sites. However, the isotope ratios of both carbon and oxygen in plaice otoliths from the other estuarine site showed the expected trend of depletion in the heavier isotopes. While the measurements recorded here did not conclusively distinguish between otoliths from juveniles caught in the estuarine site and those caught in the other three sites, they show that stable isotopes have potential to distinguish between estuarine habitats with terrestrial carbon inputs, and coastal marine habitats with predominantly marine carbon inputs.     

Can turbidity caused by Corophium volutator (Pallas) activity be used to assess sediment toxicity rapidly?

The standard toxicity test organism, Corophium volutator, exhibits a behavioural response to contaminated sediments that causes increased turbidity of overlying water. We quantify the effects of this response to an estuarine sediment spiked with copper and hydrocarbon contaminated sediments from an oil installation in the North Sea. Turbidity measured 24 h after the start of a toxicity test shows a strong relationship with contaminant concentrations and with mortality after 10 days. Turbidity measurements can therefore give a rapid indication of sediment toxicity, permitting a reduction in storage time of sediments to be used in dilution series and toxicity identification evaluation (TIE) tests, reducing the likelihood of contaminants degrading prior to testing.     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.