Effects of salinity on egg and fecal pellet production,development and survival,adult sex ratio and total life span in the calanoid copepod, <Emphasis Type="Italic">Acartia tonsa</Emphasis>: a laboratory study

The effects of salinity on the copepod, Acartia tonsa in terms of daily egg production rate (EPR), hatching success, fecal pellet production rate (FPR), naupliar development time and survival, sex ratio, and total life span were determined in laboratory conditions through three experiments. In experiment 1, EPR, hatching success, and FPR of individual females were monitored at salinities of 13, 20, 35 and 45 during short-periods (seven consecutive days). Results show EPR was affected by salinity with the highest outputs recorded at 20 and 35, respectively, which were considerably higher than those at 13 and 45. Mean FPR was also higher in 35 and 20. In experiment 2, the same parameters were evaluated over total life span of females (long-term study). The best EPR and FPR were observed in 35, which was statistically higher than at 13 and 20. In experiment 3, survival rates of early nauplii until adult stage were lowest at a salinity of 13. The development time increased with increasing of salinity. Female percentage clearly decreased with increasing salinity. Higher female percentages (56.7% and 52.2%, respectively) were significantly observed at two salinities of 13 and 20 compared to that at 35 (25%). Total longevity of females was not affected by salinity increment. Based on our results, for mass culture we recommend that a salinity of 35 be adopted due to higher reproductive performances, better feeding, and faster development of A. tonsa.     

Synsedimentary deformations in member 2 of the Mila Formation in the Central Alborz Mountains,Northern Iran

In Alborz Mountains, the thickness of sediments in Member 2 of the Mila Formation (Middle Cambrian) underwent dramatic and abrupt deformations, which were accompanied by normal and reverse faults and asymmetrical folds. These deformed sediments are covered by parallel beds both in the upper and lower sides. The existence of such extension and compression structures adjacent to each other indicates the influence of non-tectonic factors in their evolution. These deformations induced by downslope gliding of sediment packages are fully compatible with the dislocation model of Farrell (J Struct Geol 6:727–736, 1984) and Farrell and Eaton (1987). Moreover, the occurrence of synsedimentary deformations in a vast area in Alborz Mountains reinforces the probability of the impact of seismic shocks in their formation. In fact, incessant seismic events in the Middle Cambrian led to numerous submarine slumpings in the sediments of Member 2 of the Mila Formation.     

Comparison of Factorial Kriging Analysis Method and Upward Continuation Filter to Recognize Subsurface Structures — A Case Study: Gravity Data from a Hydrocarbon Field in the Southeast Sedimentary Basins of the East Vietnam Sea

To interpret geophysical anomaly maps, it is necessary to filter out regional and sometimes noise components. Each measured value in a gravity survey consists of different components. Upward continuation (UC) is one of the most widely used filters. The shortcoming of this filter is not to consider the spatial structure of the data, and also the fact that the trial and error approach and expert’s judgment are needed to adjust it. This study aims to compare the factorial kriging analysis (FKA) and UC filters for separation of local and regional anomalies in the gravity data of a hydrocarbon field in the southeast sedimentary basins of the East Vietnam Sea. As shown in this paper, FKA method permits to filter out all of the identified structures, while the UC filter does not possess this capability. Therefore, beside general and classic filtering methods, the FKA method can be used as a strong method in filtering spatial structures and anomaly component.     

Validation of TRMM 3B42 V6 for estimation of mean annual rainfall over ungauged area in semiarid climate

This research compares data from the Tropical Rainfall Measuring Mission 3B42 V6 with data obtained from 19 synoptic rain gauges during the period 1998–2010 over the semiarid climate of Khorasan Razavi, Iran. Validation was performed using three spatial extents, including 1 TRMM grid face from the synoptic station (1PTRM), 3 TRMM points surrounding the synoptic station (3PTRM) and 5 TRMM points surrounding the synoptic station (5PTRM), using ArcGIS 10.2 software. The perfect and poor r were obtained at stations S08 and S19, with values of 0.92 and 0.26, respectively. According to the Nash–Sutcliffe efficiency coefficient, the TRMM satellite can predict the spatial variation of the mean annual rainfall by 0.23, 0.43 and 0.38 for 1PTRM, 3PTRM and 5PTRM, respectively, at 19 stations. The agreement significantly increases by 0.88, 0.83 and 0.80 for 1PTRM, 3PTRM and 5PTRM, respectively, when gauges S05, S07, S11 and S13 are excluded from the dataset, which may be associated with orographic or instrumental error at the stations.     

Geological and Geophysical Studies of Sulfide Copper Mineralization in the Dochileh Area: An Example of Manto‐Type Deposit in the Sabzevar Zone,Iran

The Dochileh stratiform copper deposit in the Sabzevar Zone of northeastern Iran is hosted in the basaltic sequence of the Upper Eocene age. The host rock displays two hydrothermal events: zeolite–carbonate alteration that is a stratigraphic–lithologic feature and chlorite and chlorite/ferruginous alterations in the local mineralized structures. Ore formation is related to both hydrothermal events and occurs in both stratiform and vein mineralization types. Mineralization consists of main chalcocite with variable amounts of bornite, chalcopyrite, native copper, malachite, and cuprite minerals, which occur as hydrothermal breccias, and disseminated, vein, and veinlet forms. Geophysical field studies using resistivity and induction polarization (IP) methods were conducted along nine survey lines in the area. As a result of modeling and interpretation of the acquired geophysical data, high values of IP and resistivity corresponding to mineralization were observed at two depth levels: 0–20 m and more than 40 m. Based on these geological and geophysical investigations, six locations for drilling exploration boreholes were proposed. Drilling data confirmed the mineralization containing high copper values in the two depth levels: the vein‐type mineralization in the surface and shallow depth level, and the stratiform mineralization at the deeper level. Fluid inclusion studies in calcite and quartz from stratiform‐ and vein‐type mineralization show the evidence of mixing, and a linear dilution trend during the ore formation occurred at a wide range of temperatures: 121–308°C and 80–284°C, respectively, and varying salinities of between 3.2–16.8 and 0.8–22 wt% NaCl equivalents. The stable isotope composition of δ³⁴S that falls in a range of ?2.4 to +25.0‰ could be considered biogenetic sulfur from bacterial sulfate reduction and leaching of sulfur from hosting basalt. The δ¹³C values of calcite vary between ?0.6 and ?7.6‰, suggesting a major contribution of marine carbonates associated with igneous carbonates, and the δ¹⁸O_SMOW values of calcite are between +15.2 and +19.9‰, suggesting a contribution of δ¹⁸O‐rich sedimentary rocks and δ¹⁸O‐poor meteoric water. Copper and sulfide‐rich hydrothermal fluid have flowed upward through the local faults and permeable interbeds within the Eocene volcanic sequence and have formed the mineralized veins and horizons. The geophysical results have detected the local faults as the channel ways for mineralization.     

Comparison of mineralization pattern of geochemical data in spatial and position-scale domain using new DWT- PCA approach

In the current research to determine the mineralization pattern and discuss the mineralization components, the information of position - scale domain of geochemical data has been analyzed. A new method is proposed based on coupling discrete wavelet transforms (DWT) and principal component analysis (PCA) for mineralization elements forecasting applications. The results of this study indicate the potential of DWT–PCA method for geochemical data processing. Wavelet transform (WT), as a multi-spectral analysis method, can decompose the spatial and temporal signals into different frequencies. The features of mineralization can be identified using the position - scale domain of geochemical data that may not be achievable in spatial domain. The geochemical data from the Dalli region have been processed in the spatial domain using PCA. The surface geochemical data of 30 elements have been transformed to position–scale domain using two-dimensional discrete wavelet transform (2DDWT). Wavelet functions (WFs) of Haar, Coiflet2, Biorthogonal3.3 and Symlet7 have been applied separately to decompose the geochemical data to high and low frequencies in one level. To obtain more accurate and complete information of mineralization, a new index has been presented based on wavelet coefficients. Based on this new index, significant results have been obtained by using PCA of the index. The coefficients distribution map (CDM) as a new exploratory criterion has been generated based on 2DDWT to show the geochemical distribution map (GDM). Finally, the results of WT have been compared with the results of spatial domain and the best method of wavelet for interpretation of geochemical data has been introduced. The results of geochemical data analysis by DWT–PCA approach have been confirmed by the exploratory drillings in the study area.     

An efficient approach for historical storage and retrieval of segmented road data in Geographic Information System for Transportation

One of the most powerful functions of Geographic Information System for Transportation(GIS-T)is Dynamic Segmentation(DS),which is used to increase the efficiency and precision of road management by generating segments based on attributes.The road segments describing transportation data are both spatially and temporally referenced.For a variety of transportation applications,historical road segments must be preserved.This study presents an appropriate approach to preserve and retrieve the historical road segments efficiently.In the proposed method,only the portions of segments of a time stamp that have been changed into new segments rather than storing the entire segments for every old time stamp are recorded.The storage of these portions is based on the type of changes.A recursive algorithm is developed to retrieve all segments for every old time stamp.Experimental results using real data of Tehran City,Iran justify the strength of the proposed approach in many aspects.An important achievement of the results is that database volume for 2006,2007 and 2008 within the Historical Line Event Table(HLET)is reduced by 70%,80%and 78%,respectively.The proposed method has the potential to prevent from vast data redundancy and the unnecessary storage of entire segments for each time stamp.Since the present technique is performed on ordinary plain tables that are readable by all GIS software,special software platforms to manage the storage and retrieval of historical segments are not needed.In addition,this method simplifies spatio-temporal queries.     

Impact of a new invasive ctenophore (Mnemiopsis leidyi) on the zooplankton community of the Southern Caspian sea

The invasive ctenophore Mnemiopsis leidyi (Agassiz), which was transported from the Black Sea into the Caspian Sea at the end of the 1990s, has negatively affected the ecosystem of the Caspian Sea. Zooplankton abundance, biomass and species composition were evaluated on the Iranian coast of the Caspian Sea during 2001–2006. A total of 18 merozooplankton (13 species composed of larvae of benthic animals) and holozooplankton (four Copepoda and one Cladocera) species were identified. The total number of zooplankton species found here was 50% less than in a previous investigation performed in the same region in 1996 before the introduction of Mnemiopsis leidyi into the Caspian Sea. Cladocera species seemed to be highly affected by the invasion of Mnemiopsis leidyi; only one species, Podon polyphemoides, remained in the study area, whereas 24 Cladocera species were found in the study carried out in 1996. Whereas among the Copepoda Eurytemora minor, Eurytemora grimmi, Calanipeda aquae dulcis and Acartia tonsa that were abundant before the Mnemiopsis leidyi invasion, only A. tonsa (copepodites and adults) dominated the inshore and offshore waters after the invasion. The maximum in zooplankton abundance (22,088 ± 24,840 ind·m^?3) and biomass (64.1 ± 56.8 mg·m^?3) were recorded in December 2001 and August 2004, respectively. The annual mean zooplankton abundance during 2001–2006 was in the range of 3361–8940 ind·m^?3; this was two‐ to five‐fold less than the zooplankton abundance in 1996. During 2001–2006, the highest abundance and biomass of Mnemiopsis leidyi were observed during summer‐autumn months coincident with warm temperatures and generally when the abundance of other zooplankton organisms was low.