Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

Seismic damage assessment in Sarpole-Zahab town (Iran) using synthetic aperture radar (SAR) images and texture analysis

Natural Hazards - The synthetic aperture radar SAR system with the capability of imaging during the night, day, and the all-weather conditions has a high potential in change detection on the ground...     

Introducing a Novel Approach for Oil-Oil Correlation based on Asphaltene Structure:X-ray Diffraction

Asphaltenes have always been an attractive subject for researchers. However, the application of this fraction of the geochemical field has only been studied in a limited way. In other words, despite many studies on asphaltene structure, the application of asphaltene structures in organic geochemistry has not so far been assessed. Oil-oil correlation is a well-known concept in geochemical studies and plays a vital role in basin modeling and the reconstruction of the burial history of basin sediments, as well as accurate characterization of the relevant petroleum system. This study aims to propose the X-ray diffraction (XRD) technique as a novel method for oil-oil correlation and investigate its reliability and accuracy for different crude oils. To this end, 13 crude oil samples from the Iranian sector of the Persian Gulf region, which had previously been correlated by traditional geochemical tools such as biomarker ratios and isotope values, in four distinct genetic groups, were selected and their asphaltene fractions analyzed by two prevalent methods of XRD and Fourier-transform infrared spectroscopy (FTIR). For oil-oil correlation assessment, various cross-plots, as well as principal component analysis (PCA), were conducted, based on the structural parameters of the studied asphaltenes. The results indicate that asphaltene structural parameters can also be used for oil-oil correlation purposes, their results being completely in accord with the previous classifications. The average values of distance between saturated portions (dr) and the distance between two aromatic layers (dm) of asphaltene molecules belonging to the studied oil samples are 4.69? and 3.54?, respectively. Furthermore, the average diameter of the aromatic sheets (La), the height of the clusters (Lc), the number of carbons per aromatic unit (Cau), the number of aromatic rings per layer (Ra), the number of sheets in the cluster (Me) and aromaticity (fa) values of these asphaltene samples are 10.09?, 34.04?, 17.42?, 3.78?, 10.61? and 0.26?, respectively. The results of XRD parameters indicate that plots of dr vs. dm, dr vs. Me, dr vs. fa, dm vs. Lc, Lc vs. La, and fa vs. La perform appropriately for distinguishing genetic groups. A comparison between XRD and FTIR results indicated that the XRD method is more accurate for this purpose. In addition, decision tree classification, one of the most efficacious approaches of machine learning, was employed for the geochemical groups of this study for the first time. This tree, which was constructed using XRD data, can distinguish genetic groups accurately and can also determine the characteristics of each geochemical group. In conclusion, the obtaining of structural parameters for asphaltene by the XRD technique is a novel, precise and inexpensive method, which can be deployed as a new approach for oil-oil correlation goals. The findings of this study can help in the prompt determination of genetic groups as a screening method and can also be useful for assessing oil samples affected by secondary processes.     

Input Selection Based on Information Theory for Constructing Predictor Models of Solar and Geomagnetic Activity Indices

Various phenomena with solar origin and their mutual dependence must be studied in order to predict behaviors in solar – terrestrial system. Linear statistical methods prevalent in analyzing natural systems may not be able to detect nonlinear dependencies among solar and geomagnetic processes. When relations, whether linear or nonlinear, between indices and their changes over time are revealed, better predictions can be made through appropriate modeling techniques. Selection of nonredundant input variables to build suitable models for prediction of solar and geomagnetic activity is of utmost importance. Mutual information is a tool that is capable of capturing all dependencies for detecting nonlinear relations and selecting the best subset of input variables by means of an applicable algorithm that maximizes information about the output and minimizes the shared information between inputs. High generalization power and improved interpretability of the selected inputs are the consequences of this analysis.     

Geochemical constraints on the provenance of Oligocene–Miocene siliciclastic deposits (Zivah Formation) of NW Iran: implications for the tectonic evolution of the Caucasus

In this study, the whole-rock geochemistry of 35 Oligocene–Miocene sandstone and shale samples from the Zivah Formation, Moghan area (NW Iran) were collected and analyzed for evaluation of their provenance, tectonic setting and the intensity of paleo-weathering. Low to moderate values of the chemical index of alteration (mean CIA?=?53/68 for sandstones/shales) and relatively high values of index of compositional variability (mean ICV?=?1.23/1.08 for sandstones/shales) suggest weak chemical weathering and an immature source. These results support for the semi-arid and semi-humid paleoclimate conditions in the source area. The geochemistry results reveal that the sediments were deposited in a basin related to the island arc and active continental margin tectonic settings, probably indicating the time of initial collision between Arabia and Eurasia. The enrichment of Cr, Ni and V in the sandstone and shales are consistent with mafic input from the source area. However, La/Th vs. Hf and La/Sc vs. Co/Th plots reveal mixed source of felsic and intermediate volcanic rocks. The data indicate that the sediments most likely originated from a mixture of mafic, intermediate and felsic igneous source areas, possibly as the erosional products of localized topography of the Talysh and the Lesser Caucasus mountains (south to southwest), created by compression in the Moghan region during the syn-collisional development of the Caucasus.     

Contribution of the Root to Slope Stability

Land sliding is a geotechnical event that includes a wide range of ground movements such as rockfalls, deep failure of slopes and shallow debris flows, and it can cause various problems in varied civil fields such as roads and dams. Since most conventional methods are neither inexpensive nor applicable everywhere, attention has nowadays been drawn to soil bioengineering using vegetation as the environment-friendly method for slope stabilization. Soil bioengineering or using vegetation in civil engineering design is mostly applicable to shallow slope stabilization projects characterized by unstable slopes with surface movement. Vegetation has both a silent effect on soil improvement to predict the landslide and a mechanical role to increase shear and pulling-out stress on the soil. During the last decade, many researches have been carried out to clarify the effect of vegetation on slope stability, but many questions still remain to be answered.     

A late Pleistocene long pollen record from Lake Urmia, NW Iran

A palynological study based on two 100-m long cores from Lake Urmia in northwestern Iran provides a vegetation record spanning 200 ka, the longest pollen record for the continental interior of the Near East. During both penultimate and last glaciations, a steppe of Artemisia and Poaceae dominated the upland vegetation with a high proportion of Chenopodiaceae in both upland and lowland saline ecosystems. While Juniperus and deciduous Quercus trees were extremely rare and restricted to some refugia, Hippophaë rhamnoides constituted an important phanerophyte, particularly during the late last glacial period. A pronounced expansion in Ephedra shrub-steppe occurred at the end of the penultimate late-glacial period but was followed by extreme aridity that favoured an Artemisia steppe. Very high lake levels, registered by both pollen and sedimentary markers, occurred during the middle of the last glaciation and late part of the penultimate glaciation. The late-glacial to early Holocene transition is represented by a succession of Hippophaë, Ephedra, Betula, Pistacia and finally Juniperus and Quercus. The last interglacial period (Eemian), slightly warmer and moister than the Holocene, was followed by two interstadial phases similar in pattern to those recorded in the marine isotope record and southern European pollen sequences.     

Tectonically controlled sedimentation: impact on sediment supply and basin evolution of the Kashafrud Formation (Middle Jurassic,Kopeh-Dagh Basin,northeast Iran)

The Kashafrud Formation was deposited in the extensional Kopeh-Dagh Basin during the Late Bajocian to Bathonian (Middle Jurassic) and is potentially the most important siliciclastic unit from NE Iran for petroleum geology. This extensional setting allowed the accumulation of about 1,700 m of siliciclastic sediments during a limited period of time (Upper Bajocian–Bathonian). Here, we present a detailed facies analysis combined with magnetic susceptibility (MS) results focusing on the exceptional record of the Pol-e-Gazi section in the southeastern part of the basin. MS is classically interpreted as related to the amount of detrital input. The amount of these detrital inputs and then the MS being classically influenced by sea-level changes, climate changes and tectonic activity. Facies analysis reveals that the studied rocks were deposited in shallow marine, slope to pro-delta settings. A major transgressive–regressive cycle is recorded in this formation, including fluvial-dominated delta to turbiditic pro-delta settings (transgressive phase), followed by siliciclastic to mixed siliciclastic and carbonate shoreface rocks (regressive phase). During the transgressive phase, hyperpycnal currents were feeding the basin. These hyperpycnal currents are interpreted as related to important tectonic variations, in relation to significant uplift of the hinterland during opening of the basin. This tectonic activity was responsible for stronger erosion, providing a higher amount of siliciclastic input into the basin, leading to a high MS signal. During the regressive phase, the tectonic activity strongly decreased. Furthermore, the depositional setting changed to a wave- to tide-dominated, mixed carbonate–siliciclastic setting. Because of the absence of strong tectonic variations, bulk MS was controlled by other factors such as sea-level and climatic changes. Fluctuations in carbonate production, possibly related to sea-level variations, influenced the MS of the siliciclastic/carbonate cycles. Carbonate intervals are characterized by a strong decrease of MS values indicates a gradual reduction of detrital influx. Therefore, the intensity of tectonic movement is thought to be the dominant factor in controlling sediment supply, changes in accommodation space and modes of deposition throughout the Middle Jurassic sedimentary succession in the Pol-e-Gazi section and possibly in the Kopeh-Dagh Basin in general.