Preliminary results of seismic hazard assessment in the Sannio-Matese area of Southern Italy

The seismic hazard in the Sannio-Matese area has been worked out by a modification of the McGuire (1976) computing programme, taking into account the influence of nine potential seismic source zones.The method uses truncated-quadratic intensity-frequency distribution and azimuth-dependent intensity attenuation derived from isoseismal maps for each of the seismogenetic sources. A new modification has been introduced to take into account different decay of the intensity in the near (to VIII degree) and far (from VIII degree) field.Different assumptions about maximum possible intensities and truncation of intensity-frequency laws are used to evaluate the effects of the uncertainties on the computed hazard at high intensities. Intensities associated with different level of annual probability are computed for five test sites in the considered area. Maps displaying the expected intensity for a mean return period of 500 years (pa 0.002) are presented and compared with observed intensities.Presented at the XXIst General Assembly of the European Seismological Commission, Symposium on Methods of Seismic Hazard Assessment in Europe, Sofia, 23–27 August 1988.     

Assessment of seismic hazard for the Sannio-Matese area of Southern Italy — A summary

The working group on Test Regions for Evaluation of Methods for Seismic Hazard Assessment in Europe (TERESA), consisted of 15 members from 10 different European countries. Methods and experience gathered in these countries have been compared and discussed for two test areas in Europe: the Sannio-Matese region, Southern Italy, with high seismic activity, and the border region between Belgium, The Netherlands, and Federal Republic of Germany, with low activity.This paper summarizes the results for one of the test areas, Sannio-Matese. Most of the participants used statistical procedures to assess earthquake hazard, receiving results in terms of probability of occurrence for intensity as the ground-motion parameter. It was found that careful preparation of input data and parameters is the major influencing factor, therefore most of the efforts of the working group was devoted to this task.The scatter of the obtained results of the group is considerable, mainly because of the uncertainties in the data and the subjectiveness involved in the procedures. For better control of both factors, more objective methods have to be developed.     

Seismic hazard computations for regions with low earthquake activity — A case study for the Belgium,The Netherlands and NW Germany area

The algorithms to evaluate seismic hazard, used and/or developed by five teams participating in the TERESA project, applied to the low seismicity area Belgium, The Netherlands and NW Germany are compared. The main differences in the results can be explained by the majority criterion of Egozcue et al. (1989), the differences in the upper bound and zonification and, in some cases, by a higher attenuation.     

Treatment of ground-motion predictive relationships for the reference seismic hazard map of Italy

In the framework of the 2004 reference seismic hazard map of Italy the amplitude of the strong-motion (expressed in terms of Peak Horizontal Acceleration with 10% probability of non-exceedence in 50 years, referred to average hard ground conditions) was computed using different predictive relationships. Equations derived in Italy and in Europe from strong-motion data, as well as a set of weak and strong-motion based empirical predictive relationships were employed in a logic tree procedure, in order to capture the epistemic uncertainty affecting ground-motion attenuation. This article describes the adjustments and conversions required to eliminate the incompatibilities amongst the relations. Particularly significant are distance conversions and style-of-faulting adjustments, as well as the problems related to the use of regional relations, such as the selection of a reference depth, the quantification of random variability and the strong-motion prediction. Moreover, a regional attenuation relationship specific for volcanic areas was also employed, allowing a more realistic evaluation of seismic hazard, as confirmed by the attenuation of macroseismic intensities.     

Mapping soil effects in Barcelona, Spain, through an integrated GIS environment

Maps of soil response for the city of Barcelona have been for the first time obtained through a GIS environment that integrates the different procedures for soil response estimation within a single tool. These maps constitute part of the results of the local scale application of the computer prototype for seismic risk assessment that was developed within the European project SERGISAI. The approach involves: collection of available data relevant to local geology, implementation of geotechnical models, estimation of the reference seismic action, generation of synthetic strong-motion time histories, and soil response calculation through 1D analytical method. The resulting predictive hazard maps of predominant period and amplification ratio delineate potential variations on ground shaking and constitute a first approximation towards an integrated approach to Barcelona urban area microzonation. Analysis of the observed differences, when comparing the analytical results in this study with previous empirical studies, provides a useful feedback to establish site dependence suitability and reliability of methods, to extract information on at-present inaccessible parameters needed for the characterisation of physical properties of soil, and also to delimit those areas where further in-depth survey research is needed for a proper seismic hazard assessment.     

A different intensity recording for reducing the uncertainty in its assessment: An application to the completeness analysis of earthquake catalogues

The purpose of this paper is to emphasize the consequences of the ordinal and qualitative nature of seismic intensity regarding its recording. The classical way of recording by an integer value implies that on many occasions it can be difficult to associate only one intensity degree to an event. Therefore, we propose to record the intensity in a new way so that the expert is no longer restricted to indicating only one value, but can express his belief that the considered event belongs to any one of the intensity classes in the scale. Following this approach, as an example, we study the completeness of the Sannio-Matese catalogue and show how the degree of completeness changes according to the degree of uncertainty in intensity assessment.     

Calibration of stochastic finite-fault ground motion simulations for the 1997 Umbria-Marche, Central Italy, earthquake sequence

The recent 1997 Umbria-Marche, Central Italy, earthquake sequence allowed us to model recorded ground motions using a method developed by Beresnev and Atkinson [Bull Seism Soc Am 87 (1997) 67–84; Seism Res Lett, 69 (1998) 27–32; Bull Seism Soc Am 88 (1998) 1392–1401]. The method generalizes the stochastic ground-motion simulation technique, developed for point sources, to the case of finite faults. It subdivides the fault plane into subfaults and assumes each subfault to be a point source with a ω² spectrum. Geometric spreading and regional anelastic attenuation are included in the model. The data include horizontal acceleration recordings from the SSN and ENEL databases of the 1997 Umbria-Marche events on 26 September, at 00:33 GMT, with M_w=5.7, and at 09:40 GMT, with M_w=6.0; and on 14 October at 15:23 GMT, with M_w=5.6. The strong motion simulations are performed using model parameters based on the results of previous studies, and adjusting the subfault size to calibrate the simulation model against recorded ground motions. Local site response is considered to account for observed amplification effects at specific recording sites (e.g. Nocera Umbra). A good agreement is found between the simulated response spectra and the recorded data, concluding that this method reproduces the salient ground-motion characteristics at different distances and azimuths.     

High-frequency maximum observable shaking map of Italy from fault sources

We present a strategy for obtaining fault-based maximum observable shaking (MOS) maps, which represent an innovative concept for assessing deterministic seismic ground motion at a regional scale. Our approach uses the fault sources supplied for Italy by the Database of Individual Seismogenic Sources, and particularly by its composite seismogenic sources (CSS), a spatially continuous simplified 3-D representation of a fault system. For each CSS, we consider the associated Typical Fault, i.e., the portion of the corresponding CSS that can generate the maximum credible earthquake. We then compute the high-frequency (1–50?Hz) ground shaking for a rupture model derived from its associated maximum credible earthquake. As the Typical Fault floats within its CSS to occupy all possible positions of the rupture, the high-frequency shaking is updated in the area surrounding the fault, and the maximum from that scenario is extracted and displayed on a map. The final high-frequency MOS map of Italy is then obtained by merging 8,859 individual scenario-simulations, from which the ground shaking parameters have been extracted. To explore the internal consistency of our calculations and validate the results of the procedure we compare our results (1) with predictions based on the Next Generation Attenuation ground-motion equations for an earthquake of M_w 7.1, (2) with the predictions of the official Italian seismic hazard map, and (3) with macroseismic intensities included in the DBMI04 Italian database. We then examine the uncertainties and analyse the variability of ground motion for different fault geometries and slip distributions.     

Ground motion observations and simulation for local earthquakes in the Campi Flegrei volcanic area

Ground motion produced by low magnitude earthquakes can be used to predict peak values in high seismic risk areas where large earthquakes data are not available. In the present work 20 local earthquakes (M_D∈[?0.3, 2.2]) occurred in the Campi Flegrei caldera during the last decade were analyzed. We followed this strategy: empirical relations were used to calibrate synthetic modeling, accounting for the source features and wave propagation effects. Once the source and path parameters of ground motion simulation were obtained from the reference data set, we extrapolated scenarios for stronger earthquakes for which real data are not available. The procedure is structured in two steps: (1) evaluation of ground motion prediction equation for Campi Flegrei area and assessment of input parameters for the source, path and site effects in order to use the finite fault stochastic approach (EXSIM code); (2) simulation of two moderate-to-large earthquake scenarios for which only historical data or partial information are available (M_w4.2 and M_w5.4). The results show that the investigated area is characterized by high attenuation of peak amplitude and not negligible site effects. The stochastic approach has revealed a good tool to calibrate source, path and site parameters on small earthquakes and to generate large earthquake scenario. The investigated magnitude range represents a lower limit to apply the stochastic method as a calibration tool, due to the small size of involved faults (fault length around 200/300 m).