Mineralogical characterization of a unique material having heavy oxygen isotope anomaly in matrix of the primitive carbonaceous chondrite Acfer 094

We report the mineral compositions and micro-texture of the isotopically anomalous (δ^17,18O_SMOW ∼ +180‰) Fe-S-Ni-O material recently discovered in matrix of the primitive carbonaceous chondrite Acfer 094 [Sakamoto N., Seto Y., Itoh S., Kuramoto K., Fujino K., Nagashima K., Krot A. N. and Yurimoto H. (2007) Oxygen isotope evidence for remnants of the early solar system primordial water. Science317, 231-233]. Synchrotron radiation X-ray diffraction and transmission electron microscopy studies indicate that this material consists of the symplectitically intergrown magnetite (Fe₃O₄) and pentlandite (Fe_5.7Ni_3.3S₈) with magnetite/pentlandite volume ratio of ∼2.3. Magnetite forms column-shaped grains (10-30 nm in diameter and 100-200 nm in length); pentlandite occurs as worm-shaped grains or aggregates of grains 100-300 nm in size between magnetite crystals. Although both the X-ray diffraction and electron energy loss spectra support identification of iron oxide as magnetite, the electron diffraction patterns show that magnetite has a weak 3-fold superstructure, possibly due to ordering of vacancies. We infer that the isotopically anomalous symplectite formed by sulfurization and oxidization of metal grains either in the solar nebula or on an icy planetesimal. The intersite cation distribution of pentlandite suggests that timescale of oxidation was no longer than 1000 years.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Cycladophora davisiana (Radiolaria) in the Okhotsk Sea: A key for reconstructing glacial ocean conditions

Cycladophora davisiana, a radiolarian species dwelling at mesopelagic depths, is known as a representative glacial fauna due to its unique distribution during glacial periods. In the present ocean, abundant production of C. davisiana is only observed in the Okhotsk Sea, indicating an adaptation of C. davisiana for seasonal sea-ice covered conditions. We found pronounced abundant production of C. davisiana during the early to middle Holocene in the Okhotsk Sea, suggesting more favorable conditions for C. davisiana than the present Okhotsk Sea. In order to clarify the reason, oceanographic conditions during the Holocene were reconstructed based on biomarkers, lithogenic grains including ice-rafted debris (IRD), biogenic opal, and total organic carbon (TOC) in two sediment cores from the Okhotsk Sea. These indicators suggest that the pronounced C. davisiana production may be attributed to: 1) a supply to mesopelagic depths under intensified stratification of fine organic particles derived from coccolithophorids, bacteria, and detrital materials; and 2) cold, well-ventilated intermediate water formation.     

Preferential concentration of marine particles in isotropic turbulence

The effect of small-scale turbulence on marine and aquatic particle transport has traditionally been to act as a means for creating homogeneous distributions. However, previous numerical simulations of heavy particle transport in turbulent flows have shown that particles are preferentially concentrated by turbulence and that effects of preferential concentration are most pronounced for particle parameters comparable to the Kolmogorov scales. Therefore, the focus of the present work is examination of the preferential concentration of marine particles. Application of Kolmogorov scaling indicates that effects of preferential concentration may be important for marine particles with diameters of order 1 mm in the upper mixed layer. Numerical simulations of unstratified isotropic turbulence are then used to support the notion that preferential concentration of particles possessing material characteristics representative of those encountered in marine environments can occur. In the simulations, particles of order 1 mm diameter are idealized as rigid spheres with a density ratio of 1.005. Simulation results demonstrate preferential concentration with peak particle number densities ranging from 10 to 60 times the global mean value. Implications of preferential concentration are also discussed, together with the limitations of the approach employed in the present study.     

Soil-structure interaction analysis of the Hualien containment model

This paper presents results from forced vibration tests, microtremor observations and earthquake response analysis of a nuclear reactor containment model constructed on stiff soil in Hualien, Taiwan. The dynamic behavior of the soil-structure system is simulated successfully with two numerical models: a sway-rocking model, whose soil parameters are evaluated on the basis of the continuum formulation method, and a finite element model, using the program SASSI with the flexible volume substructuring approach. The dependences of the soil parameters of both models on the amplitudes of the different dynamic excitations are investigated in detail. An original numerical simulation of microtremor is performed. Comparison with results of a previous study involving a rigid tower on a soft soil site in Chiba, Japan is offered.     

Fundamental study on the response characteristics of drivers during an earthquake based on driving simulator experiments

After the 1995 Kobe earthquake, the expressway structures in Japan were retrofitted and they will not now be seriously damaged under a certain level of strong earthquake motion. However, the stability of a moving vehicle has not been investigated yet. It has been reported that drivers feel seismically induced vibrations, especially in the transverse direction of vehicles. Owing to this phenomenon, drivers have some difficulty in controlling the vehicles during strong shaking. For further safety promotion of the expressway networks, it is important to understand the drivers' reactions to seismic motion. The present authors have performed a series of seismic response analyses of a moving vehicle to investigate its response characteristics based on numerical simulation. However, the responses of the driver were not considered in the simulation process. In order to investigate the drivers' reactions during an earthquake, a series of virtual tests were conducted using a driving simulator. This driving simulator has six servomotor‐powered electric actuators that control its motions. Several types of tests were carried out for different examinees to investigate drivers' responses while controlling the simulator under seismic motion. The results of this study showed that a larger response time lag to strong shaking and over turning of the steering wheel may shift the vehicle into the next lane. According to this finding, trafficaccidents could possibly occur under strong ground shaking in the case of heavy traffic. Copyright © 2004 John Wiley & Sons, Ltd.     

类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

Sequence of faulting and deformation during the 2000 eruptions of the Usu Volcano, Hokkaido, Japan—interpretation and image analyses of aerial photographs

Significant faulting and deformation of the ground surface has been rarely known during volcanic eruptions. Usu Volcano, Hokkaido, Japan, is a unique example of deformation due to felsic magma intrusion. Usu Volcano has a history of such types of eruptions as phreatic, pumice eruption (Plinian type), pyroclastic flowing and lava doming since 1663. On March 31, 2000, phreatomagmatic to phreatic eruptions took place after 23 years of dormancy in the western piedmont, followed by explosions on the western flank of Usu Volcano. They were associated with significant deformation including faulting and uplift. The eruptions and deformation were continuing up to the end of May 2000.We identified the faulting using total nine sets of aerial photographs taken from before the eruption (March 31, 2000) to more than 1 year (April 27, 2001) after the end of the activity, and traced deformation processes through image processing using aerial photographs. We found that some of the new faults and the associated phreatic eruptions were related to old faults formed during the 1977–1981 eruptive episode.The image processing has revealed that the surface deformation is coincident with the area of faulting forming small grabens and the phreatic explosion vents. However, the faulting and main explosive eruptions did not take place in the highest uplift area, but along the margin. This suggests that the faulting and explosive activities were affected by small feeder channels diverging from the main magma body which caused the highest uplift.