“蛟龙”号载人潜水器运行与保障信息管理系统设计与应用

2017年我国"蛟龙"号载人潜水器完成了为期5年的试验性应用,期间累计下潜100余次,形成和建立了科学完善的应用保障体系和专业的应用人才队伍。以"蛟龙"号试验性应用中运行与保障的实践经验为基础,针对其中设备与备品备件管理、运行作业管理、拆检总装管理、数据资料查询与利用等方面的重要需求,设计开发了一套"蛟龙"号载人潜水器运行与保障信息管理系统,通过信息化平台实现设备资源、作业成果以及经验积累传承之间的高效衔接与复用,最大限度地降低装备运行成本、提高作业效率、保障海上作业安全。文章提出的载人潜水器运维体系能够为我国其他行业或部门的载人潜水器、远程缆控机器人(ROV)、水下自治机器人(AUV)等重大海洋装备的运行与保障提供有益参考借鉴。     

毛乌素沙区1961-2016年降水特征

基于毛乌素沙区10个气象站1961-2016年观测资料，应用Mann-Kendall方法和t检验法对各气象站年降水量进行了突变检验，借助小波分析讨论了各气象站年降水量的周期特征，根据降水量等值线划分结果对整个研究区分区分析了年、季、月和日尺度上的降水变化特征，并在两个时段上分析了季节性降水的差异。结果表明：毛乌素沙区年降水量空间特征差异明显，东部亚区呈上升趋势，中西部亚区呈下降趋势，但变化趋势不显著且无突变发生；降水年内分配不均，干湿季分明，降水集中在5-9月，夏秋季降水占全年降水比重大，季、月和日尺度降水量存在梯度递减变化；年降水量的年际变化过程存在多重时间尺度的自相似结构；近26年的冬春季降水增加显著，但降水波动幅度小于前30年。     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

珠江口淇澳岛滨海湿地沉积环境演化及其对人类活动的响应

滨海湿地作为人类活动和全球变化反应最为敏感的区域，其沉积记录可以反映出周边地区环境变化及人类活动信息。珠江口淇澳岛滨海湿地钻孔分析结果表明，在中全新世期间淇澳岛附近海域为河口湾环境，在风化层以上开始出现淤积，但在4 200 a BP前后受极冷气候的影响，沉积物粗化；自2 500 a BP以来，沉积环境相对稳定，在小冰期期间略有变化。沉积速率计算结果显示:淇澳岛附近海域自中全新世高海面以来的平均沉积速率为0.29 cm/a，4 160~2 500 a BP、2 500 a BP-1488年、1488-1893年、1893-1986年、1990-2007年期间的平均沉积速率分别为:0.17 cm/a、0.23 cm/a、0.35 cm/a、1.37 cm/a和5.94 cm/a，沉积速率逐渐增大，反映了珠江三角洲演化过程中沉积相与沉积环境的变化；1986-1990年期间的海堤建造极大地扰动了该钻孔上部的沉积过程，在工程施工期间共沉积了厚度约112 cm的沉积层，而在海堤建成后，沉积速率也显著增大。沉积物总有机碳、总氮和C/N值的垂向分布表明，在4 160~2 500 a BP期间受海洋环境影响较大，沉积物中有机碳以海源为主，2 500 a BP以来沉积物中碳、氮含量明显增大，C/N也相应变大，有机碳主要来源于陆源输入，但在小冰期期间海源有机碳贡献略有所增大；近百年来由于受人类活动影响显著，陆源有机碳的贡献快速增加。     

Area usage estimation and spatiotemporal variability in distribution patterns of southern right whales,Eubalaena australis,of southern Brazil

Southern right whales—Eubalaena australis (Desmoulins, 1822)—migrate seasonally from high‐latitude feeding grounds to coastal breeding and calving grounds at lower latitudes such as the southern coast of Brazil. Understanding how these whales are distributed along the coast is important for monitoring their postwhaling recovery and defining management strategies. In this study, we applied Kernel density estimators to aerial survey data to determine main occurrence and concentration areas of right whales in southern Brazil and investigate inter‐ and intra‐annual distribution patterns between 2003 and 2012. Our results show considerable variation in area usage within and among years, and changes in the general distribution pattern of right whales in the last years of the study. Intra‐annually, higher concentration area tended to expand from July to September and decrease in November. Some areas stood out as high‐density areas for right whales: Ribanceira/Ibiraquera, Itapirubá Sul/Sol, and from Arroio to Gaivota. Some evidences also suggest preferential areas for mother–calf pairs. The higher concentration area of right whales in southern Brazil was estimated at 52,541 km² and the occurrence area was 682.69 km², which is the whole study area. As right whale distribution in the region is likely expanding due to this population's current recovery, our study provides essential information for management plan of the Right Whale Environmental Protection Area.     

载波/多普勒平滑伪距在Android手机中的定位实现

针对Android手机GNSS伪距定位精度较低的问题，利用手机端观测信息，通过载波相位/多普勒平滑伪距改善手机端伪距观测值的质量，从而达到提高定位精度的效果。首先给出了Android手机GNSS原始观测量的获取方法，然后推导了载波相位平滑伪距和多普勒平滑伪距算法模型，并设计合理有效的试验对算法的精度进行评定。试验结果表明：在手机端静态定位中载波相位和多普勒平滑算法均可提高原始伪距的定位精度，且多普勒平滑算法表现更优；在手机端动态定位中多普勒平滑算法可获得比原始伪距更优的定位精度，但是载波相位平滑算法较原始伪距更差；由于硬件的制约手机端周跳和信号失锁严重，占比超过50%，载波相位在手机端的可用性较低；多普勒平滑算法的最优平滑时间常数小于等于10 s，具有实时动态定位的巨大潜力。     

Review of pre-processing technologies for ice cores

High-resolution ice core records covering long time spans enable reconstruction of the past climatic and environmental conditions allowing the investigation of the earth system’s evolution. Preprocessing of ice cores has direct impacts on the data quality control for further analysis since the conventional ice core processing is time-consuming, produces qualitative data, leads to ice mass loss, and leads to risks of potential secondary pollution. However, over the past several decades, preprocessing of ice cores has received less attention than the improvement of ice drilling, the analytical methodology of various indices, and the researches on the climatic and environmental significance of ice core records. Therefore, this papers reviews the development of the processing for ice cores including framework, design as well as materials, analyzes the technical advantages and disadvantages of the different systems. In the past, continuous flow analysis (CFA) has been successfully applied to process the polar ice cores. However, it is not suitable for ice cores outside polar region because of high level of particles, the memory effect between samples, and the filtration before injection. Ice core processing is a subtle and professional operation due to the fragility of the nonmetallic materials and the random distribution of particles and air bubbles in ice cores, which aggravates uncertainty in the measurements. The future developments of CFA are discussed in preprocessing, memory effect, challenge for brittle ice, coupling with real-time analysis and optimization of CFA in the field. Furthermore, non-polluting cutters with many different configurations could be designed to cut and scrape in multiple directions and to separate inner and outer portions of the core. This system also needs to be coupled with streamlined operation of packaging, coding, and stacking that can be implemented at high resolution and rate, avoiding manual intervention. At the same time, information of the longitudinal sections could be scanned and identified, and then classified to obtain quantitative data. In addition, irregular ice volume and weight can also be obtained accurately. These improvements are recorded automatically via user-friendly interfaces. These innovations may be applied to other paleomedias with similar features and needs.     

气候变化下基于物种与植物耦联机制的小白额雁(Anser erythropus)潜在生境及适宜性研究--以长江流域中下游为例

气候变化和人类活动通过改变物种生境而影响物种多样性。小白额雁是长江流域中下游的一种具有较高生态价值的食草型濒危候鸟,受气候变化和人类活动威胁。本文以小白额雁为代表性物种,定量分析了气候变化对长江流域中下游候鸟潜在生境及适宜性空间分布格局的影响。采用Maxent模型模拟了当前情景和全球环流模型(GCMs)气候场景下小白额雁潜在生境及其适宜性分布。研究结果表明,小白额雁分布特征与其栖息地周边植物分布呈显著相关关系;运用Maxent模型模拟小白额雁六种主要食源植物的分布特征,并将其结果作为环境变量,将显著改善小白额雁潜在生境及其适宜性模型的模拟性能;在两种典型浓度情景(RCP 2.6和RCP8.5)下,2070年小白额雁潜在生境适宜性面积将下降。为应对气候变化对小白额雁的影响,应采取更加合理的管理措施和保护政策,包括调整保护区的大小、形状和用途。     

Small hypervelocity particles captured in aerogel collectors: Location,extraction, handling and storage

Abstract— It has now been about a decade since the first demonstrations that hypervelocity particles could be captured, partially intact, in aerogel collectors. But the initial promise of a bonanza of partially‐intact extraterrestrial particles, collected in space, has yet to materialize. One of the difficulties that investigators have encountered is that the location, extraction, handling and analysis of very small (10 μm and less) grains, which constitute the vast majority of the captured particles, is challenging and burdensome. Furthermore, current extraction techniques tend to be destructive over large areas of the collectors. Here we describe our efforts to alleviate some of these difficulties. We have learned how to rapidly and efficiently locate captured particles in aerogel collectors, using an automated microscopic scanning system originally developed for experimental nuclear astrophysics. We have learned how to precisely excavate small access tunnels and trenches using an automated micromanipulator and glass microneedles as tools. These excavations are only destructive to the collector in a very small area—this feature may be particularly important for excavations in the precious Stardust collectors. Using actuatable silicon microtweezers, we have learned how to extract and store “naked” particles—essentially free of aerogel—as small as 3 μm in size. We have also developed a technique for extracting particles, along with their terminal tracks, still embedded in small cubical aerogel blocks. We have developed a novel method for storing very small particles in etched nuclear tracks. We have applied these techniques to the extraction and storage of grains captured in aerogel collectors (Particle Impact Experiment, Orbital Debris Collector Experiment, Comet‐99) in low Earth orbit.