Model estimates for the interaction of wind waves and tides in the Pechora Basin-White Sea subsystem

The “weak-interaction” approximation is used to investigate the role of wind waves in tidal dynamics. The resulting expression for the drag coefficient in the wave-affected tidal flow is incorporated into the QUODDY-4 three-dimensional finite-element hydrothermodynamic model, and the thus modified model is used to calculate the K ₁ diurnal tide in the Pechora Basin-White Sea subsystem. It is shown that, depending on a combination of local and nonlocal factors, wind waves can cause opposite variations in the amplitudes and phases of tidal oscillations of the level. Local factors control variations in the tidal regime nearly in the entire water area of the subsystem under consideration, apart from the eastern part of the Pechora Basin, the outlet from the White Sea Throat, and Dvina Bay. In the aforementioned areas, the tidal regime changes are due either to the displacement of the nearest amphidromy or to other nonlocal factors resulting from the reorganization of the fields of tidal characteristics. It is also shown that the variations in tidal characteristics induced by wind waves vary within a fairly wide range and that allowance for the interaction of wind waves and tides improves the agreement between calculated and observed values of the amplitudes and phases of tidal oscillations of the level.     

Thermal Impact of Residential Ground-Water Heat Pumps

A computer simulation study was conducted to quantify the potential thermal impact of residential water-source heat pump usage on ground-water aquifers. In a first phase of the study, weather data for nine locations throughout the country were used to estimate the energy requirements for heating and air conditioning a typical residence. These energy requirements were then translated into the volumetric water demands for a selected heat pump at each location. A representative model aquifer was then defined and its characteristics used, along with the heat pump water requirements and design ΔT's (difference between inlet and outlet water temperature) to identify the important parameters that contribute to heat transfer and to model the movement of the thermal front resulting from injection of heat pump discharge water at the nine locations. The major factor that determines the heat pump thermal impact was found to be the net amount of heat injected into, or removed from an aquifer. Other significant factors included well design, heat pump design ΔT, and physical properties of the aquifer such as thickness, porosity and dispersivity. The study showed that, in climates where winter heating demand is very nearly equal to summer cooling demands, the injection of heat pump discharge water did not cause any significant modification of the ambient model aquifer temperature. However, in hot or cold climates where air conditioning or heating demand dominates, measurable thermal changes occurred in the model aquifer. In most cases, the maximum temperature     

Modelling of global ocean tides with allowance for island effects

Summary Parameterization schemes for single islands, island chains and archipelagos are described. It is shown that their utilization within the framework of a global tidal model leads not only to local peculiarities in the spatial structure of tidal characteristics, but also to cardinal restructuring of the tidal pattern far beyond the islands and an appreciable increase (about 0.5·10¹²W) of the global tidal energy dissipation. The latter is commensurable by the order of magnitude with the imbalance between estimates of tidal energy dissipation in the World Ocean as a whole and on the continental shelf.

---

Modellierung der Gezeiten der weltmeere unter Berücksichtigung von Inseleffekten

Zusammenfassung Es werden parametrisierte Darstellungen von einzelnen Inseln, Inselketten und Inselgruppen beschrieben. Es wird gezeigt, daß ihre Anwendung bei einem globalen Gezeitenmodell nicht nur zu lokalen Besonderheiten in der geographischen Struktur der Gezeiten führt, sondern auch zur grundsätzlichen Restrukturierung des Gezeitenmusters weit über die Inseln hinaus und zu einer deutlichen Zunahme (etwa 0,5·10¹² W) des globalen Gezeiten-Energieverlusts für die M₂-Tide. Dieser hat etwa die Größenordnung des Unterschiedes zwischen dem Gezeiten-Energieverlust des gesamten Weltmeeres und dem auf dem Kontinentalschelf.

     

Effect of attachment configuration on the trapping efficiency of Vaseline-coated slide catchers for windblown particles

There are various types of the windblown sediment traps developed for wind tunnel and field studies. One of the main supports expected from these traps is in measuring surface dust concentrations to appropriately derive flux equations. The measurement performance and accuracy of a trap is very important and depends strictly upon the physical characteristics and the behaviors of dust grains with air flows. This paper presents the measurement results of static pressure distribution (SPD) of wind flow around Vaseline-coated slide (VCS) catchers with an aim of finding out whether or not particle trapping efficiency (η) of the VCS is related to the SPD. The SPD was evaluated by a wind reduction coefficient (R _c) in a series of wind tunnel experiments with different VCS settings which have different attachment configurations on a pole. Three VCS configurations were considered: a configuration on a circular plastic pole (CPP) and two configurations on wooden square poles (WSP₁ and WSP₂, respectively). Thus, the primary contribution of this work was to experimentally analyze the effect of the different attachment configurations on the SPD, and the secondary objective was to determine the effect of the SPD on the η. It was shown that spatial correlation and spatial pattern of the R _c were different in the surrounding area of each configuration, and ANOVA and DUNCAN tests indicated that η(s) of WSP₁, WSP₂, and CPP were different at the significant level of P ≤ 0.05 with the mean of 0.94 ± 0.09, 0.63 ± 0.14, and 1.13 ± 0.07, respectively. Additionally, the amount of PM₂₀, PM₄₀, PM₆₀, PM₈₀, and PM₁₀₀ trapped by the configurations of WSP₁, WSP₂, and CPP considerably varied depending upon the particular aerodynamic circumstances associated with every configuration.     

Kinematics of the eastern part of the North Anatolian Fault Zone

The North Anatolian Fault Zone (NAFZ), which marks the boundary between Anatolia and the Eurasian plate, is one of the world's most seismically active structures. Although the eastern part of NAFZ has high seismic hazard, there is a lack of geodetic information about the present tectonics of this region. Even though many scientists would like to study this area, geographical and logistical problems make performing scientific research difficult. In order to investigate contemporary neotectonic deformation on the eastern NAFZ and in its neighborhood, a relatively dense Global Positioning System (GPS) monitoring network was established in 2003. Geodetic observations were performed in three GPS campaigns in an area of 350 km × 200 km with 12-month intervals. In addition, 14 new GPS stations were measured far from the deforming area. Since this region includes the intersection of the NAFZ and the East Anatolian Fault Zone (EAFZ), deformation is complex and estimating seismic hazard is difficult. One important segment is the Yedisu segment and it has not broken since the 1784 earthquake. After the 1992 Erzincan and 2003 Pulumur earthquakes, the Coulomb stress loading on the Yedisu segment of the NAFZ has increased significantly, emphasizing the need to monitor this region. We computed the horizontal velocity field with respect to Eurasia and strain rates field as well. GPS-derived velocities relative to Eurasia are in the range of 16–24 mm/year, which are consistent with the regional tectonics. The principal strain rates were derived from the velocity field. Results show that strain is accumulating between the NAFZ and EAFZ along small secondary fault branches such as the Ovacik Fault (OF).