Geological Characteristics and Stability Evaluation of Wanjia Middle School Slope in Wenchuan Earthquake Area

To investigate the formation mechanism and the stability of Wanjia middle school slope in Wenchuan Earthquake Area, the macroscopic geological characteristics and the failure process of the landslide are researched by engineering geology analysis method, limit equilibrium method, and finit element method. The results show that after the Wenchuan Earthquake, retaining walls, houses and other infrastructure on the foot of Wanjia middle school slope were severely destroyed, 10 cm wide tension fracture appeared at the trailing edge of the slope. Wanjia middle school slope is a type of medium-sized soil landslide. The area of the deformation body is about 19,314 m², the total volume of the deformation body is about 23 × 10⁴ m³. There may be two potential sliding surfaces in the unstable slope: shallow and deep landslide. The analysis results of the limit equilibrium method and the finite element method show that: under dead weight, dead weight + rainstorm, dead weight + earthquake conditions, the plastic zone occurs mainly at the middle part or the trailing edge of the slope, and it doesn’t fully cut through the deep landslide body, so the deep landslide is stable. However, under rainstorm or earthquake conditions, the plastic zone almost completely cut thorough the shallow landslide body, it shows that the shallow landslide is in the understable–basic stable state. It is found that the results of finite element method is concordant with the results of the limit equilibrium method (F _s = 1.06–1.29, the shallow landslide is in the basic stable–stable state). The calculation results show that shallow landslides are likely to occur in Wanjia middle school slope during a rainstorm or an earthquake, so monitoring and control of the slope should be strengthened. The shallow landslide should be managed by some measures, such as anti slide pile retaining structures and drainage works, and the dangerous rock bodies on the slope surface should be cleaned up.     

Influence of the Mississippi River on <Emphasis Type="Italic">Pseudo-nitzschia</Emphasis> spp. Abundance and Toxicity in Louisiana Coastal Waters

The presence of domoic acid (DA) toxin from multiple species of Pseudo-nitzschia is a concern in the highly productive food webs of the northern Gulf of Mexico. We documented the Pseudo-nitzschia presence, abundance, blooms, and toxicity over three years along a transect ～100 km west of the Mississippi River Delta on the continental shelf. Pseudo-nitzschia were present throughout the year and occurred in high abundances (>10⁴ cells l^?1) in the early spring months during high Mississippi River (MSR) flow (～20,000 m³ s^?1) but were most abundant (>10⁶ cells l^?1) when MSR discharge was relatively lower among the spring months. A high particulate toxin production (maximum reaching 13 μg DA l^?1) was associated with the high cell abundances and exceeded, by an order of magnitude, prior reports of particulate DA concentrations in Louisiana coastal waters. Differences in Pseudo-nitzschia peak times and its toxicity were correlated mainly with the timing and magnitude of MSR discharge and changes in associated parameters such as nutrient stoichiometry and salinity. A negative relationship between high MSR discharge and Pseudo-nitzschia and particulate DA concentrations was documented. These riverine dynamics have the potential to influence DA contamination in pelagic and benthic food webs in the coastal waters of the northern Gulf of Mexico.     

An Ion Chromatography Method for the Determination of Major Anions In Geothermal Water Samples

A single-column suppressed ion chromatography technique was employed for the simultaneous determination of major and trace anions in sulfaterich groundwater samples. An analytical column, a self regenerating suppressor and sodium carbonate as the eluent were used to separate the anions. Method detection limits for the anions of interest were 10.4, 15.9, 36.8, 62, 60, 61 and 67 μg l⁻¹ for F⁻, Cl⁻, NO₂⁻, Br⁻, NO₃⁻, PO₄³⁻ and SO₄²⁻ respectively. The precision of the method was tested at five different concentration levels for each anion reference sample to evaluate the effectiveness of the method for groundwater analysis. Recovery studies were performed between two successive months by adding reference samples to the geothermal groundwater and drinking water samples. Precision was also assessed as the relative standard deviation of both repeatability (within-day) and reproducibility (between-day and different concentrations) for groundwater samples. Standard deviation and RSD values of 220 groundwater samples acquired over 8 months were evaluated. The suppressed ion chromatography technique was found to be a suitable method for determining major anions in sulfate-rich geothermal water samples.     

Evaluation of dynamic properties of geosynthetic reinforced clay samples for environmental impact practices

A series of tests were conducted to investigate the improvement of damping properties of clay samples with geosynthetic inclusions. Flexible thermoplastic polymer synthetics improve damping properties of clay samples. Resonant column tests were conducted to measure the low strain shear modulus and damping ratio of laboratory prepared synthetic inclusion clay specimens. The shear modulus and damping ratio of the reinforced clay samples were investigated considering geosynthetic type (geotextile and geomembrane), number of geosynthetic sheets, and confining pressure. The test results demonstrated that the geomembrane and the number of geosynthetic sheets significantly improved the shear modulus and damping ratio of reinforced clay samples compared with those of the unreinforced clay samples.     

Determination of Copper in Water Samples after Solid‐phase Extraction Using Dimethylglyoxime‐modified Silica

This work describes the modification of silica gel with dimethylglyoxime, in order to prepare an effective sorbent for the preconcentration and determination of copper. The sorption capacity of dimethylglyoxime‐modified silica‐gel (DMGMS) was 71.37 mg g^–1 and the optimum pH for the quantitative recovery of copper was found to be 5.0. The optimum flow rate, sorbent amount, and sample volume were 1 mL min^–1, 300 mg, and 50 mL, respectively. 10 mL of 0.1 mol L^–1 HCl was the most suitable eluent. The detection limit of copper was 6.0 ng mL^–1. The recommended method, for the determination of copper, is simple and reliable, without any notable matrix effect and can be successfully applied to environmental water samples. Copper recovery in the range from 99–100% was obtained from seawater and thermal spring water using this method. The method was applied to standard reference materials, NIST‐1515 (apple leaves) and NIST‐1643e (simulated fresh water), for the determination of copper and the results were in good agreement with certified values.     

Petrogenetic evolution of the Early Miocene Ala?amda? volcano-plutonic complex, northwestern Turkey: implications for the geodynamic framework of the Aegean region

Extensional-tectonic processes have generated extensive magmatic activity that produced volcanic/plutonic rocks along an E-W-trending belt across north-western Turkey; this belt includes granites and coeval volcanic rocks of the Ala?amdağ volcano-plutonic complex. The petrogenesis of the Early Miocene Ala?amdağ granitic and volcanic rocks are here investigated by means of whole-rock Sr–Nd isotopic data along with field, petrographic and whole-rock geochemical studies. Geological and geochemical data indicate two distinct granite facies having similar mineral assemblages, their major distinguishing characteristic being the presence or absence of porphyritic texture as defined by K-feldspar megacrysts. I-type Ala?amdağ granitic stocks have monzogranitic-granodioritic compositions and contain a number of mafic microgranular enclaves of monzonitic, monzodioritic/monzogabbroic composition. Volcanic rocks occur as intrusions, domes, lava flows, dykes and volcanogenic sedimentary rocks having (first episode) andesitic and dacitic-trachyandesitic, and (second episode) dacitic, rhyolitic and trachytic-trachydacitic compositions. These granitic and volcanic rocks are metaluminous, high-K, and calc-alkaline in character. Chondrite-normalised rare earth element patterns vary only slightly such that all of the igneous rocks of the Ala?amdağ have similar REE patterns. Primitive-mantle-normalised multi-element diagrams show that these granitic and volcanic rocks are strongly enriched in LILE and LREE pattern, high (⁸⁷Sr/⁸⁶Sr)_i and low ε _Nd(t) ratios suggesting Ala?amdağ volcano-plutonic rocks to have been derived from hybrid magma that originated mixing of co-eval lower crustal-derived more felsic magma and enriched subcontinental lithospheric mantle-derived more mafic magmas during extensional processes, and the crustal material was more dominant than the mantle contribution. The Ala?amdağ volcano-plutonic complex rocks may form by retreat of the Hellenic/Aegean subduction zone, coinciding with the early stages of back-arc extension that led to extensive metamorphic core-complex formation.     

Summer heat waves over western Turkey between 1965 and 2006

Global warming is one of the greatest environmental, economic, and social threats in the world. There are many assessments to estimate climate variability over many regions. A change in the Earth’s surface temperature leads to increase in extreme temperature events, which are harmful to the ecosystem, and moreover, they create danger on human health. In this study, we have selected the western part of Turkey as the study area, since climate change projections for Turkey point out that the highest temperature change can be expected on this region during summer, and the Turkish population is very dense here to be affected by extreme events. We have used apparent temperatures to define the heat waves which we have determined their frequencies for the summer months (June–August) of 1965–2006. Since the regional comparisons of station results are intended, we selected the 90th percentile value for each station as a threshold value to be used in the delineation of heat waves. Then, the number of heat waves is determined by imposing the constraint that apparent temperatures stay above the threshold value at least for three consecutive days. Then, the changes in the number of hot days and heat waves and also their durations are analyzed by using the linear least square method. We have found that the number of hot days, heat waves, and heat wave durations is increased between 1965 and 2006 on the western part of Turkey. Additionally, their rate of change is larger within the last decade and extremes are frequently observed after 1998. Regional distributions show that the tendency of the number of heat wave events increases towards the southern latitudes of the domain. Moreover, we investigated the relationship between the number of hot days and the sea surface temperatures of the Mediterranean Sea and Black Sea. Correlation analyses are carried out by the number of hot days and averaged sea surface temperatures on the regions of the western, central, and eastern Mediterranean Sea and the Black Sea. It is found that the number of hot days of west Turkey is better correlated with the sea surface temperatures averaged over eastern Mediterranean and Black Seas. The number of heat waves is found significantly correlated with the fire occurrences for most of the stations.     

Evaluation of dose parameters and radiological hazards in gravel samples of Konyaaltı Beach,Antalya

It is important to know the distribution and transfer of radionuclides such as uranium, thorium, and potassium, which exist naturally in the environment we live in. For this reason, measurements of these natural radionuclides have been carried out for 15 gravel samples collected from Konyaalt? Beach, Antalya. In order to measure the natural activity concentrations of potassium-40, uranium-238, and thorium-232 radionuclides, we performed the measurements by applying a gamma spectrometry method with a “3?×?3” NaI(Tl) detector, which is a multichannel analytical detector in the Suleyman Demirel University gamma spectrometry laboratory. The minimum, maximum, and mean values for the ²²⁶Ra activity concentration were measured as 19.74 Bq/kg, 37.03 Bq/kg, and 31.64 Bq/kg, respectively. The minimum, maximum, and mean values for the ²³²Th activity concentration were measured as 12.76 Bq/kg, 34.32 Bq/kg, and 26.67 Bq/kg, respectively. The minimum, maximum, and mean values for the ⁴⁰K activity concentration were measured as 196.37 Bq/kg, 421.13 Bq/kg, and 350.42 Bq/kg, respectively. Dose parameters and radiation damage indices were calculated using experimentally measured activity results and the resulting dose and hazard index values were compared with the determined limit values. It can be concluded that no risk may threat in terms of the hazard index values. In addition, all results obtained in terms of calculated dose values except for annual gonadal dose are below the recommended limit values.