Todorokite formation in seawater by microbial mediation

Microbial manganese oxidation in seawater was carried out in enrichment cultures which were obtained from the seawater supply system at the Marine Science Museum, Tokai University (Shimizu-shi, Japan). The manganese oxide formed was well-crystallized todorokite. The major element composition was within the range of marine manganese concretions and the O/Mn molar ratio was 1.8. The conditions for formation of manganese oxide minerals in marine environments are discussed on the basis of these results.     

Metal-organic complexes in seawater pumped up from under the ground

Metal-organic complexes of transition elements removed by Amberlite XAD-2 resin from seawater pumped up from under the ground were determined. The proportions of iron, copper and zinc retained on the resin to dissolved forms of these metals were about 70, 40 and 5%, respectively, while manganese, cobalt and nickel were not retained on the resin. These results suggest that although iron may be retained in colloidal form, a significant fraction of copper is present in some organic form(s).     

Detecting fluctuations of the Kuroshio axis south of Japan using TOPEX/POSEIDON altimeter data

Sea surface dynamic topography (SSDT) can be divided into temporal mean SSDT and fluctuation SSDT. The former is approximated with a climatological mean SSDT and the latter is derived from satellite altimetry data, to give an approximated total SSDT (called a composite SSDT). The method is applied to detecting fluctuations of the Kuroshio axis south of Japan using TOPEX/POSEIDON altimeter data from the first year mission in 1992–1993. The fluctuation SSDT averaged over a wide area south of Japan clearly shows an annual cycle with an amplitude of about 15 cm. Temporal changes of SSDT along a subsatellite track crossing the Kuroshio compare moderately well with those estimated from repeated hydrographic observations, although there is a discrepancy of unknown origin. The composite SSDT also compares well with SSDT estimated from the same hydrographic data. Horizontal distribution of the surface geostrophic velocity component normal to subsatellite tracks is derived every ten days from the composite SSDT. Most locations of estimated strong eastward geostrophic velocities coincide well with locations of the Kuroshio axis determined every 15 days fromin situ surface velocity measurements on various vessels; for example, a fairly large meander of the Kuroshio south of Honshu is clearly detected. It is concluded that the composite SSDT can be used reliably to detect fluctuations of the Kuroshio axis south of Japan.     

Fluctuation of the sea surface dynamic topography southeast of Japan as estimated from Seasat altimetry data

The sea surface dynamic topography (the sea surface height relative to the geoid; hereafter abbreviated SSDT) can be divided into the temporal mean SSDT and the fluctuation SSDT around the mean. We use the optimal interpolation method to reduce the satellite radial orbit error and estimate the fluctuation SSDT southeast of Japan from Seasat altimetry data during the 17-day near-repeat mission. The fluctuation SSDT is further combined with the mean geopotential anomalies estimated from hydrographic data during the Seasat mission in order to give the approximated total SSDT, called here the composite SSDT (the approximated mean plus fluctuation SSDT's). The fluctuation SSDT is in accord with the low-frequency sea-level fluctuation recorded at tide gauge stations in the Japanese islands. The composite SSDT describes thoroughly variations of the location of the Kuroshio axis south of Japan determined on the basis of the GEK (Geomagnetic Electro-Kinematograph) surface velocities and the horizontal temperature distribution. The composite SSDT also agrees with oceanic variations east of Japan found in the temperature distribution at the depth of 200 m. These results confirm that the SSDT derived from altimetry data can provide fairly precise synoptic views of low-frequency oceanic phenomena.     

Kinematic analysis of sinistral cataclastic shear zones along the northern margin of the Mino Belt, central Japan

In this paper, cataclastic shear zones along the northern margin of the Mino Belt, central Japan are described, and the significance of the shearing in the tectonic evolution of SW Japan is examined. The Mino Belt in SW Japan is composed of accretionary complexes of Jurassic to Early Cretaceous age. Field investigation revealed that remarkable cataclastic shear zones trending east to northeast run along the northern margin of the Mino Belt. Closely spaced cleavage is developed in these shear zones. Lineation on the cleavage plunges at shallow to moderate angles. Deformation structures (e.g. composite planar fabric and asymmetric structure of clasts) in the sheared rocks clearly indicate a sinistral sense of shear. The shearing ceased by latest Cretaceous time, because the sheared rocks are overlain by unsheared Upper Cretaceous volcanic rocks. The sinistral shearing may be closely related to Cretaceous sinistral movement along the eastern margin of Asia. Sinistral shearing along the northern margin of the Mino Belt can be considered as a key for re-examining the tectonic development of SW Japan.     

Assessment with satellite data of the urban heat island effects in Asian mega cities

This study focuses on using remote sensing for comparative assessment of surface urban heat island (UHI) in 18 mega cities in both temperate and tropical climate regions. Least-clouded day- and night-scenes of TERRA/MODIS acquired between 2001 and 2003 were selected to generate land-surface temperature (LST) maps. Spatial patterns of UHIs for each city were examined over its diurnal cycle and seasonal variations. A Gaussian approximation was applied in order to quantify spatial extents and magnitude of individual UHIs for inter-city comparison. To reveal relationship of UHIs with surface properties, UHI patterns were analyzed in association with urban vegetation covers and surface energy fluxes derived from high-resolution Landsat ETM+ data. This study provides a generalized picture on the UHI phenomena in the Asian region and the findings can be used to guide further study integrating satellite high-resolution thermal data with land-surface modeling and meso-scale climatic modeling in order to understand impacts of urbanization on local climate in Asia.     

Equilibrium interface segregation in the diopside-forsterite system I: Analytical techniques, thermodynamics, and segregation characteristics

After syntheses of partially molten diopside-forsterite polycrystalline aggregates doped with various solutes, we analyzed the equilibrium segregation of Ni, Mn, Sr, Al, Yb, Y, Nd, La, and Ti at interfaces between diopside/diopside, diopside/forsterite and, forsterite/forsterite grains based on STEM/EDX (scanning transmission electron microscopy/energy dispersive X-ray spectrometry) to examine the effects of ionic size, valence state, co-segregation, and interface type on interface chemistry. We derive relationships between two quantities describing interface segregation and X-ray intensities acquired both from areas that include an interface and from areas that do not. These segregation quantities are (i) interface excess density and (ii) interface enrichment factor, which rely on Gibbsian thermodynamics and the Langmuir-McLean segregation model, respectively. Interface excess densities, which vary from −0.5 to 10 atoms/nm², indicate that the level of interface excess density depends on solutes and sample assemblage. Interface enrichment factors, which range from almost 1 to 130, reveal that the ionic size of the solutes affects their segregation via production of misfit lattice strain due to the difference between the size of a solute ion and that of the ideal strain-free lattice site. The ionic sizes of Yb and Y are almost identical to the size of the strain-free site; however, their segregation is significant indicating that a difference in valence state between the host elements (i.e., Ca and Mg) and the solutes also drives segregation. In contrast to other solutes, segregation characteristics of Al differ from these simple segregation rules. Segregation quantities do not change with interface type, indicating that the number of sites available for segregants and the driving force for segregation are similar among type of interfaces. We compare the element partitioning between diopside-melt and diopside-interfaces within the same sample assemblages. These two partition coefficients coincide if we approximate the number of segregation sites at interfaces as equivalent to 2 mono-atomic layers. Examination of the energetics in crystal-melt partitioning reveals that the interface segregation energy is essentially equal to the solute solution energy in a crystal.     

Equilibrium interface segregation in the diopside-forsterite system II: Applications of interface enrichment to mantle geochemistry

Segregation of incompatible elements at grain interfaces may have considerable influence on the physical and chemical properties of mantle rocks. Using a recently developed predictive model to estimate the interface enrichment of elements based on their mineral/melt partitioning (Hiraga and Kohlstedt, companion paper), we consider interface enrichment for a simplified model peridotite consisting of olivine, orthopyroxene, and clinopyroxene. Our calculated results reveal the following: (1) Significant amounts of heavy alkali elements and rare gases likely reside at grain-grain interfaces, whereas interface concentrations of less incompatible are less pronounced. (2) The contribution of the chemical components stored at interfaces to whole-rock chemistry strongly depends on mineral mode and, most importantly, on grain size. (3) Grain size reduction resulting from dynamic recrystallization can increase the total storage of highly incompatible elements on grain interfaces and thereby will diminish their concentration in mineral grains. (4) Analysis of Cs concentrations in mantle clinopyroxenes potentially provides estimates of the grain size of mantle rocks. (5) Transport through peridotite will be dominated by diffusion along interfaces rather than through grain interiors for elements less compatible than Lu.