Quantitative basin characterisation to refine debris-flow triggering criteria and processes: an example from the Italian Western Alps

This paper investigates rapid channelized debris flow related to rainfalls in small alpine basins. Its goal is to evaluate and correlate different geological and technical aspects with predisposing and triggering factors that can control these phenomena. The study area is the upper part of the Susa Valley where 12 small basins were selected. For each of them, lithological, geomorphological, climatic and technical information were mapped and analysed. Debris-flow triggering conditions, flow and depositional processes were related to physical characteristics of the basin that can be easily measured and quantified. At least three different groups of basins were found: G1) basins with one event each 4–6 years, characterised by massive or blocky calcareous rocks, G2) basins with more than one event per year that show an abundance of layered or sheared fine-grained rocks and G3) basins with recurrence levels exceeding 10 years, activated only by heavy and prolonged rainfalls, marked by massive or blocky coarse-grained igneous rocks. Furthermore, important morphometric differences were found. These considerations are useful in terms of hazard zonation and risk mitigation.     

Linking foraging behavior and diet in a diving seabird

Foraging behavior and diet of breeding seabirds may be analysed simultaneously with the combined use of remote sensing devices and stable isotope analysis. Imperial shag, Phalacrocorax atriceps, breeding at Punta León colony, Argentina, were equipped with global positioning system (GPS) loggers to record foraging trips and blood samples were taken after removal of the devices in order to analyse their nitrogen and carbon stable isotope composition in whole blood and plasma. Whole blood was correlated to plasma isotopic composition for each individual (n = 35), linking diet in the short and medium term. Sexes did not differ in isotopic signatures. The maximum distance reached and the total number of dives that individuals made on two consecutive foraging trips were correlated to their plasma nitrogen isotopic signature. Individuals that went further from the colony and dived fewer times presented more positive signatures, indicative of benthic prey consumption (e.g. Raneya brasiliensis). Diet was predominantly benthic with some individuals incorporating pelagic prey (Engraulis anchoita) and even cephalopods (Octopus tehuelchus). Within breeding pairs (n = 9), different combinations of foraging and prey preferences were observed. Estimated trophic levels of these individuals were similar to those of the same species in other colonies further south along the Patagonian coast.     

Search for strange attractors in magnetic field data: An example from a tertiary volcanic area near Bonn, Germany

Spatial variations of the magnetic field, measured at the Earth's surface, are mainly due to geological inhomogeneities within the crust. The present state of the crust, in turn, reflects its past dynamical processes and evolution. We analyzed the magnetic field intensity along a few but densely sampled profiles in a Tertiary volcanic province near Bonn, Germany. The aim was to find out whether the variation of the magnetic intensity can be related to a deterministic, although chaotic, generating system or to a stochastic one. In the former case, the geodynamical history would depend on a few degrees of freedom, whereas in the latter case, the parameters to take into account were so many that a statistic approach appears to be more suitable. Since strange attractors do not emerge from the analyzed data, we exclude the presence of a chaos generating system. Autocorrelation functions and a rescaled-range analysis, on the other hand, reveal and quantify a certain degree of correlation among successive data points and allow calculation of a range of spectral exponents in log-log diagrams, which are clearly distinct from those of white noise and Brownian motion. Only one of the profiles exhibits similarity to uncorrelated or white noise. In this case, the signal variations do not result from the local geology but from a buried gas pipe-line, aligned subparallel to that profile. If self-organized crustal evolution generally produces signatures that can be described as correlated noise, within a limited bandwidth of spectral exponents, erraneous or disturbed data could eventually be discriminated from records containing purely natural data by applying analysis tools of the dynamic system theory together with autocorrelation tests.     

Clinopyroxenes from mantle-related xenocrysts in alkaline basalts from Hannuoba (China): augite–pigeonite exsolutions and their thermal significance

Optically homogeneous augite xenocrysts, closely associated with spinel–peridotite nodules, occur in alkali basalts from Hannuoba (Hebei province, China). They were studied by electron and X-ray diffraction to define the occurrence and significance of pigeonite exsolution microtextures. Sub-calcic augite (Wo₃₄) exsolved into En_62–62Fs_25–21Wo_13–17 pigeonite and En_46–45Fs_14–14Wo_40–42 augite, as revealed by TEM through diffuse coarser (001) lamellae (100–300 Å) and only incipient (100) thinner ones (<70 Å). C2/c augite and P2₁/c pigeonite lattices, measured by CCD-XRD, relate through a(Aug)?a(Pgt), b(Aug)?b(Pgt), c(Aug)≠c(Pgt) [5.278(1) vs 5.189(1)Å] and β(Aug)≠β(Pgt) [106.55(1) vs 108.55(2)°]. Cell and site volumes strongly support the hypothesis that the augite xenocrysts crystallised at mantle depth from alkaline melts. After the augite xenocrysts entered the magma, (001) lamellae first formed by spinodal decomposition at a T_min of about 1,100 °C, and coarsened during very rapid transport to the surface; in a later phase, possibly on cooling, incipient (100) lamellae then formed.     

Apatite solubility in carbonatitic liquids and trace element partitioning between apatite and carbonatite at high pressure

We have measured apatite solubility in calcic carbonatitic liquids and determined apatite/melt partition coefficients for a series of trace elements, including the rare earth elements (REE), high field strength elements (HFSE), Rb, Sr, U-Th-Pb. Experiments were performed between 4 and 6 GPa, from 1200 to 1380 °C, using the multianvil apparatus. Trace element concentrations were determined by laser ablation ICP-MS and electron microprobe. In addition, a specific protocol was designed to measure carbon concentration in the apatites, using the electron microprobe. Two starting apatite samples were used in order to test for the effect of apatite chemistry on partitioning behavior.Apatite solubility is lower in calcitic melts by a factor 3-5 compared to dolomitic melts (3-5.5 vs. 10-18 wt.% P₂O₅ in melt). We interpret this difference in terms of solubility product in the liquid and propose an empirical model for apatite saturation that takes into account melt calcium content. We conclude that calcitic melts that may form by melting of carbonated eclogites could be saturated with residual apatite, contrary to dolomitic melts formed in carbonated peridotites.Compatibility behavior of the REE depends on apatite silica content: REE are compatible in apatites containing 3.5-5 wt.% SiO₂, with values between 1.5 and 4, whereas REE are incompatible in apatites containing 0.2 wt.% SiO₂. HFSE, U, Th, and Y are compatible in silica-rich apatite, with while . Strontium is always retained in the melt, with of the order of 0.5. Lead appears to be incompatible in apatite, although this finding is weakened by almost complete Pb loss to sample container. High silica concentration favors REE incorporation in apatite by allowing for charged balanced coupled substitution. Sulfur and carbonate may also favor REE incorporation in apatite. Our results allow to reconcile previously published experimental determinations of REE partitioning. We use our experimentally determined partition coefficients to investigate the impact of residual apatite during partial melting of recycled carbonated material (eclogite + sediments) and discuss how the chemical characteristics of the produced liquids can be affected by residual apatite.     

Structural styles and tectonic evolution of the Kolia-Boboti sedimentary Basin,Kédougou-Kéniéba inlier,eastern Senegal

New structural data obtained on the Birimian terranes of the Kolia-Boboti sedimentary Basin, the eastern part of the Dialé-Daléma Supergroup in the Kédougou-Kéniéba inlier show two major phases of Eburnean compressional deformation: (1) a D1 phase of thrusting tectonics affected the Lower Birimian B1 tourmalinized sediments. This first tectonic phase is characterized by isoclinals overturned to recumbent folds P1 with N040° 20°NE trending axis, associated with axial plane schistosity S₀S₁ which is mainly transposed in the bedding; (2) a D2 phase of compressional (D2a) and transpressional (D2b) tectonics is responsible for the crossfolds P2a-P2b exhibiting curved axes. These P2 folds are associated with the major schistosity S₂, north-south to SW-NE trending, mainly dipping to the south-east. The S₂ schistosity is mostly displayed in the large shear zones corridors where it steeply dips locally toward the north-west. A north-west vergence thrusting phase (D2c) of flats and ramps, associated with reverse folds, represents the last Eburnean event. This geometrical feature is characteristic of a “positive flower structure”. These different Eburnean compressional phases are separated by extensional deformation which is characterized by sedimentary deposits and volcanic flows.     

Observing Entrainment Processes Using a Small Unmanned Aerial Vehicle: A Feasibility Study

Measurement flights with the meteorological mini aerial vehicle (M $^2$ AV) were performed in spring 2011 to assess the capability of an unmanned aerial vehicle (UAV) to measure the structure of the transition zone between the convective boundary layer and the stably stratified free atmosphere. The campaign took place at the Meteorological Observatory Lindenberg/Richard-Aßmann-Observatory of the German Meteorological Service. Besides the M $^2$ AV flights, observations were made from a 12-m and a 99-m tower, a sodar, two ceilometers, radiosondes, and a tethered balloon with sensor packages at six different levels. M $^2$ AV measurements were intentionally combined with remote sensing systems. The height range of the entrainment zone as well as its diurnal cycle were provided by the remote sensing instruments. The UAV provided the high-resolution in situ data of temperature and wind for the study of turbulent processes. It is shown that the M $^2$ AV is able to maintain constant altitude with very small deviations—a pre-requisite to study processes inside the often quite thin entrainment zone and that M $^2$ AV high-resolution wind and temperature measurements allow for very detailed studies of the fine structure of the atmosphere and thus for the identification of quite local and/or short-duration processes such as overshooting thermals or downward intrusions of warm air. Spatial series measured by the M $^2$ AV during horizontal flights show turbulent exchange of heat in short turbulent bursts at heights close to and within the entrainment zone. Scaled vertical profiles of vertical velocity, potential temperature variance, and sensible heat flux confirm the general shape found by previous measurements and numerical studies.     

The effect of cation ordering and temperature on the high-pressure behaviour of dolomite

Synchrotron single-crystal X-ray diffraction experiments at high-pressure and high-temperature conditions were performed up to 20 GPa and 573.0(2) K on a fully ordered stoichiometric dolomite and a partially disordered stoichiometric dolomite [order parameter, s = 0.26(6)]. The ordered dolomite was found to be stable up to approximately 14 GPa at ambient temperature and up to approximately 17 GPa at T = 573.0(2) K. The P–V data from the ambient temperature experiments were analysed by a second-order Birch–Murnaghan equation-of-state giving K ₀ = 92.7(9) GPa for the ordered dolomite and K ₀ = 92.5(8) GPa for the disordered dolomite. The high-temperature data, collected for the ordered sample, were fitted by a third-order Birch–Murnaghan equation-of-state resulting in K ₀ = 95(6) GPa and K′ = 2.6(7). In order to compare the three experiments results, a third-order Birch–Murnaghan equation-of-state was also calculated for the ambient temperature experiments giving K ₀ = 93(3) GPa, K′ = 3.9(6) for the ordered dolomite and K ₀ = 92(3) GPa, K′ = 4.0(4) for the disordered dolomite. The derived axial moduli show that dolomite compresses very anisotropically, being the c-axis approximately three times more compressible than the a-axis. The axial compressibility increases as T increases, and the a-axis is the most temperature-influenced axis. On the contrary, axial compressibility is not influenced by disordering. Structural refinements at different pressures show that Ca and Mg octahedra are almost equally compressible in the ordered dolomite with K(CaO₆) = 109(4) GPa and K(MgO₆) = 103(3) GPa. On the contrary, CaO₆ compressibility is reduced and MgO₆ compressibility is increased in the disordered crystal structure where K(CaO₆) = 139(4) GPa and K(MgO₆) = 89(4) GPa. Disordering is found to increase CaO₆ and to decrease MgO₆ bond strengths, thus making stiffer the Ca octahedron and softer the Mg octahedron. Cation polyhedra are distorted in both ordered and disordered dolomites and they increase in regularity as P increases. Ordered dolomite approaches regularity at approximately 14 GPa. The increase in regularity of octahedra in the disordered dolomite is strongly affected by the very slow regularization of MgO₆ with respect to CaO₆. The phase transition to the high-pressure polymorph of dolomite (dolomite-II), which is driven by a significant increase in the regularity of both cations polyhedra and mineral crystal structure, occurs in the ordered dolomite at ambient temperature at approximately 14 GPa; whereas no clear evidences of phase transition were observed as regards the disordered crystal structure.     

The High-Resolution Coronal Imager (Hi-C)

The High-Resolution Coronal Imager (Hi-C) was flown on a NASA sounding rocket on 11 July 2012. The goal of the Hi-C mission was to obtain high-resolution (≈?0.3?–?0.4′′), high-cadence (≈?5 seconds) images of a solar active region to investigate the dynamics of solar coronal structures at small spatial scales. The instrument consists of a normal-incidence telescope with the optics coated with multilayers to reflect a narrow wavelength range around 19.3 nm (including the Fe xii 19.5-nm spectral line) and a 4096×4096 camera with a plate scale of 0.1′′?pixel^?1. The target of the Hi-C rocket flight was Active Region 11520. Hi-C obtained 37 full-frame images and 86 partial-frame images during the rocket flight. Analysis of the Hi-C data indicates the corona is structured on scales smaller than currently resolved by existing satellite missions.