Interferometric observations of HCN and CN towards carbon stars

Using the IRAM interferometer we have observed four carbon stars (U Cam, CIT6, Y CVn, IRC+40540) in the HCN(J=1 0) and CN(N=1 0) lines. Here we present some results for CIT6 and U Cam.     

Application of the DDM and fracture mechanics model on the simulation of rock breakage by mechanical tools

A DDM (displacement discontinuity method) program coupled with a modified energy criterion is used to simulate the development of cracks and chips by indentation tools. In our analysis a cavity model is applied to represent the expansion of crushed rock to the surrounding rock and the cracks are formedin two-dimensional and quasi-static conditions. The model parameters, rock properties and load magnitudes are varied in the numerical calculations. The results show that chips are formed by multiple mechanisms of either tension or shear, or their combinations. The cracks may either propagate to the free surface to form chips or rest in the rock subsurface. The crack development is dependent upon rock and fracture properties, loading force and tool characteristics. The DDM is a convenient tool in the study of rock fragmentation and cracks.     

Enhanced concentrations of dissolved gaseous mercury in the surface waters of the Arctic Ocean

During an almost three months long expedition in the Arctic Ocean, the Beringia 2005, dissolved gaseous mercury (DGM) was measured continuously in the surface water. The DGM concentration was measured using an equilibrium system, i.e. the DGM in the water phase equilibrated with a stream of gas and the gas was thereafter analysed with respect to its mercury content. The DGM concentrations were calculated using the following equation, DGM = Hg_eq / k_H' where Hg_eq is the equilibrated concentration of elemental mercury in the gas phase and k_H' is the dimensionless Henry's law constant at desired temperature and salinity. During the expedition several features were observed. For example, enhanced DGM concentration was measured underneath the ice which may indicate that the sea ice acted as a barrier for evasion of mercury from the Arctic Ocean to the atmosphere. Furthermore, elevated DGM concentrations were observed in water that might have originated from river discharge. The gas-exchange of mercury between the ocean and the atmosphere was calculated in the open water and both deposition and evasion were observed. The measurements showed significantly enhanced DGM concentrations, compared to more southern latitudes.     

Nonlinear kinetic Alfvén wave with Poisson equation correction in the low aurora

Nonlinear kinetic Alfvén waves where m _e /m _i , have been solved both with and without the Poisson equation correction. It is found that the ratio of the perpendicular electric field and magnetic field, and the ratio of parallel and perpendicular electric field increase with deepening of the depressive density soliton. The former ratio may be larger than the Alfvén velocity in the case of a large amplitude solitary kinetic Alfvén wave. The Poisson equation correction is important for the nonlinear kinetic Alfvén wave propagating along the magnetic field, which solves a puzzle of Sagdeev potential to approach infinity in the limit ofK _x 0. This correction causes the solitary KAW possessing an electrostatic character along the direction of wave moving frame. These results have been compared with the observations from the Freja satellite in the low aurora.     

Reprint of “Seasonal and daily variation of mercury evasion at coastal and off shore sites from the Mediterranean Sea”

Dissolved gaseous mercury (DGM) was measured continuously using two newly developed techniques and a manual technique. The continuous techniques were based on the equilibrium between the aqueous and gaseous phase (DGM = Hg_extr / H', Hg_extr is the measured mercury concentration in the gas phase, H' is the Henry's Law coefficient at the desired temperature). In order to calculate the annual mercury evasion from the Mediterranean Sea, diurnal and seasonal measurements of DGM, total gaseous mercury in air (TGM), water temperature and wind speed were performed. During August 2003, March–April 2004 and October–November 2004 measurements of these parameters were conducted on board the RV Urania. The continuous measurements of DGM showed a diurnal variation in concentration, at both coastal and off shore sites, with higher concentrations during daytime than nighttime. The concentration difference could be as large as 130 fM between day and night. The degree of saturation was calculated directly from the measurements, S = Hg_extr / TGM and was found to vary between the different seasons. The highest average degree of saturation (850%) and the largest variation in saturation (600–1150%) was observed during the summer. The spring showed the lowest variation (260–360%) and the lowest average degree of saturation (320%). The autumn also showed a large variation in saturation (500–1070%) but a lower average (740%) compared to the summer cruise. This might be explained by the temperature difference between the different seasons, since that parameter varied the most. The flux from the sea surface was calculated using the gas exchange model developed by Nightingale et al. [Nightingale, P.D., Malin, G., Law, C.S., Watson, A.J., Liss, P.S., Liddicoat, M.I., Boutin, J., Upstill-Goddard, R. C., 2000. In situ evaluation of air–sea gas exchange parameterization using novel conservative and volatile tracers. Global Biogeochemical Cycles, 14(1):373–387]. The evasion varied between the different seasons with the highest evasion during the autumn, 24.6 pmol m^− 2 h^− 1. The summer value was estimated to 22.3 pmol m^− 2 h^− 1 and the spring to 7.6 pmol m^− 2 h^− 1. Using this data the yearly evasion from the Mediterranean Sea surface was estimated to 77 tons.     

Biogeochemistry in highly reduced mussel farm sediments during macrofaunal recolonization by Amphiura filiformis and Nephtys sp.

Mussel farming is considered a viable means for reducing coastal eutrophication. This study assessed the importance of bioturbation by recolonizing fauna for benthic solute fluxes and porewater distributions in manipulated mussel farm sediments. Three consecutive time-series flux incubations were performed during an experimental period of three weeks in sieved farm sediment treated with the brittle star Amphiura filiformis and the polychaete Nephtys sp. The functional behavior of Nephtys sp. and interactions between Nephtys sp. and the spontaneously colonizing spionid Malacoceros fuliginosus determined the biogeochemical response in the Nephtys sp. treatment. For example, the oxic zone was restricted and benthic nitrate and silicate fluxes were reduced compared to the brittle star treatment. A. filiformis seemed to enhance the bioadvective solute transport, although an increased supply of oxygen was due to the highly reducing conditions of the sediment mainly seen as secondary effects related to porewater distributions and benthic nutrient fluxes.     

Exchange flux of total gaseous mercury between air and natural water surfaces in summer season

The exchanges of mercury between surface and air are of significance in the biogeochemical cycling of Hg in the environment, but there are still few reliable data on air/surface exchange in aquatic systems. Field measurement campaigns over seawater surface at Kristineberg Marine Research Station (KMRS) and over Hovg?rds?n River surface at Knobesholm in southwestern Sweden were conducted to measure mercury flux using a dynamic flux chamber technique coupled with automatic mercury vapor-phase analyzers. Both sites show net emissions during summer time. Mercury fluxes measured over both river and seawater surfaces exhibit a consistently diurnal pattern with maximum fluxes during the daytime period and minimum fluxes during the nighttime period. At freshwater site, mercury flux is strongly correlated with the intensity of net solar radiation, and negatively correlated with relative humidity. A typical exponential relationship between mercury flux and water temperature was observed at freshwater measurement site. At seawater site, a strong correlation between mercury flux and intensity of solar radiation was obtained. The driving force of mercury emission from water surface to air is the super-saturation of dissolved gaseous mercury in aqueous phase.     

Numerical simulation of the fracture process in cutting heterogeneous brittle material

The process of cutting homogeneous soft material has been investigated extensively. However, there are not so many studies on cutting heterogeneous brittle material. In this paper, R‐T^2D (Rock and Tool interaction), based on the rock failure process analysis model, is developed to simulate the fracture process in cutting heterogeneous brittle material. The simulated results reproduce the process involved in the fragmentation of rock or rock‐like material under mechanical tools: the build‐up of the stress field, the formation of the crushed zone, surface chipping, and the formation of the crater and subsurface cracks. Due to the inclusion of heterogeneity in the model, some new features in cutting brittle material are revealed. Firstly, macroscopic cracks sprout at the two edges of the cutter in a tensile mode. Then with the tensile cracks releasing the confining pressure, the rock in the initially high confining pressure zone is compressed into failure and the crushed zone gradually comes into being. The cracked zone near the crushed zone is always available, which makes the boundary of the crushed zone vague. Some cracks propagate to form chipping cracks and some dip into the rock to form subsurface cracks. The chipping cracks are mainly driven to propagate in a tensile mode or a mixed tensile and shear mode, following curvilinear paths, and finally intersect with the free surface to form chips. According to the simulated results, some qualitative and quantitative analyses are performed. It is found that the back rake angle of the cutter has an important effect on the cutting efficiency. Although the quantitative analysis needs more research work, it is not difficult to see the promise that the numerical method holds. It can be utilized to improve our understanding of tool–rock interaction and rock failure mechanisms under the action of mechanical tools, which, in turn, will be useful in assisting the design of fragmentation equipment and fragmentation operations. Copyright © 2002 John Wiley & Sons, Ltd.     

APPLICATION OF A SPLITTING FRACTURE MODEL TO THE SIMULATION OF ROCK INDENTATION SUBSURFACE FRACTURES

A two-dimensional fracture model based on micro-fracture mechanics is applied to the Hertzian indentation stress field to simulate subsurface fractures in an axi-symmetrical plane. The simulation of fracture development reveals quantitatively the effects of loading force, mechanical properties of the rocks, and original micro cracks on the formation of subsurface fractures. The distribution patterns of the subsurface fractures are determined by the magnitudes and trajectories of the indentation stresses. Lateral confinement prohibits the fracture development. Simulations of the subsurface fractures in granite and marble are in good agreement with the indentation experiments. © 1997 by John Wiley & Sons, Ltd.