Regional modelling of rainfall-induced runoff using hydrological model by incorporating plant cover effects: case study in Kelantan,Malaysia

The objective of this paper is to develop a spatial temporal runoff modelling of local rainfall patterns effect on the plant cover hilly lands in Kelantan River Basin. Rainfall interception loss based on leaf area index, loss/infiltration on the ground surface, and runoff calculation were considered as the main plant cover effects on the runoff volume. In this regard, a hydrological and geotechnical grid-based regional model (integrated model) was performed using Microsoft Excel^® and GIS framework system for deterministic modelling of rainfall-induced runoff by incorporating plant cover effects. The infiltration process of the current model was integrated with the precipitation distribution method and rainfall interception approach while the runoff analysis of integrated model was employed based on loss/infiltration water on the ground surface with consideration of water interception loss by canopy and the remaining surface water. In the following, the spatial temporal analysis of rainfall-induced runoff was performed using 10 days of hourly rainfall events at the end of December 2014 in Kelantan River Basin. The corresponding changes in pressure head and consequent rate of infiltration were calculated during rainfall events. Subsequently, flood volume is computed using local rainfall patterns, along with water interception loss and the remaining surface water in the study area. The results showed the land cover changes caused significant differences in hydrological response to surface water. The increase in runoff volume of the Kelantan River Basin is as a function of deforestation and urbanization, especially converting the forest area to agricultural land (i.e. rubber and mixed agriculture).     

Conjunctive use of surface water and groundwater via the bank infiltration method

The bank infiltration (BI) technique may be a viable option if the local climate, hydrological, and geological conditions are conducive. This study was specifically conducted to explore the possibility of using BI to source the polluted surface water in conjunction with groundwater. Three major factors were considered for evaluation: (1) investigation on the contribution of surface water through BI, (2) input of local groundwater, and (3) water quality characteristics of water supply. Initially, the geophysical method was employed to define the subsurface geology and hydrogeology, and isotope techniques were performed to identify the source of groundwater recharge and interaction between surface water and groundwater. The physicochemical and microbiological parameters of the local surface water bodies and groundwater were analyzed before and during water abstraction. Extracted water revealed a 5 %–98 % decrease in turbidity, as well as HCO₃ ⁺, SO₄ ^?, NO₃ ^?, Al, As, and Ca concentration reduction compared with those of Langat river water. However, water samples from test wells during pumping show high concentrations of Fe²⁺ and Mn²⁺. In addition, amounts of Escherichia coli, total coliform, and Giardia were significantly reduced (99.9 %). Pumping test results indicate that the two wells (DW1 and DW2) were able to sustain yields.     

The impact of health financing and CO<Subscript>2</Subscript> emission on health outcomes in Sub-Saharan Africa: A cross-country analysis

The current paper examines the relationship between health financing (public and out-of-pocket health financing), CO₂ emission and health outcomes in 35 Sub-Saharan African countries for the period of 1995–2012. The panel unit root and cointegration tests are conducted as pre-tests, followed by the estimation of the parameters using the FM-OLS and DOLS techniques. The findings of the study show the importance of public health financing as one of the major factors that lead to better health outcomes, whereas the out-of-pocket expenditure is found to be harmful to population health since it leads to increase under-5 mortality rate. Although the results show a negative relationship between CO₂ and health outcomes, still these results remain inclusive. In addition, the findings reveal the importance of socioeconomic factors such as income and education as key determinants of health outcomes.     

Composition and source identification of polycyclic aromatic hydrocarbons in mangrove sediments of Peninsular Malaysia: indication of anthropogenic input

This is a comprehensive study of the composition, origin and sources of specific polycyclic aromatic hydrocarbons (PAHs) in sediments of mangrove estuary in the western part of Peninsular Malaysia. Mangrove sediments were analyzed for 17 PAHs by gas chromatography–mass spectrometry. Total PAH concentrations in the sediments ranged from 20 to 112 ng/g on a dry-weight basis. High molecular weight PAHs were abundant in the sediments. Parent PAH ratios revealed that pyrogenic input has important contribution to the sedimentary PAHs. Ratios of alkylated PAHs indicate that the sedimentary PAHs were influenced by petrogenic PAHs, which implies that petrogenic input has contribution to the sedimentary PAHs but that it is not a major factor in distribution of PAHs within the estuary. Combustion-derived PAHs show a positive and very strong correlation with total PAHs (R ² = 0.926, p < 0.05). Total methylphenanthrenes show very weak correlation with total PAHs (R ² = 0.0928, p < 0.05). The PAH concentrations were found to increase with distance from the upstream of the estuary to the coastal area of the Straits of Malacca. For the assessment of sediment contamination using biological thresholds, none of the individual studied PAH compounds exceeded the values of the effect range low–effect range median guideline and the threshold effects level–probable effects level guideline. This study demonstrates that the sediments of the mangrove ecosystem facing the Straits of Malacca and Sumatra are influenced by anthropogenic PAH inputs as a result of human activities such as biomass burning, vehicle emissions and boating activities.     

Groundwater resources assessment using integrated geophysical techniques in the southwestern region of Peninsular Malaysia

Combined geophysical techniques such as multi-electrode resistivity, induced polarization, and borehole geophysical techniques were carried out on volcano-sedimentary rocks in the north of Gemas as part of the groundwater resource’s investigations. The result identifies four resistivity units: the tuffaceous mudstone, tuffaceous sandstone, the tuff bed, and the shale layer. Two types of aquifer systems in terms of storage were identified within the area: one within a fracture system (tuff), which is the leaky area through which vertical flow of groundwater occurs, and an intergranular property of the sandy material of the aquifer which includes sandstone and tuffaceous sandstone. The result also reveals that the aquifer occupies a surface area of about 3,250,555 m² with a mean depth of 43.71 m and a net volume of 9.798?×?10⁷?m³. From the approximate volume of the porous zone (28 %) and the total aquifer volume, a usable capacity of (274.339?±?30.177)?×?10⁷?m³ of water in the study area can be deduced. This study provides useful information that can be used to develop a much broader understanding of the nature of groundwater potential in the area and their relationship with the local geology.     

Separation of Vanillin from Oil Palm Empty Fruit Bunch Lignin

The separation of vanillin from the lignin of empty fruit bunch oil palm is presented in this study. The lignin was extracted from soda black liquor derived from oil palm empty fruit bunches (EFB) using 20% sulfuric acid. Nitrobenzene oxidation was carried out by adding 50 mg of dry EFB lignin into a mixture of 7 mL of 2 M NaOH and 4 mL of nitrobenzene in a 15 mL steel autoclave. The autoclave was sealed tightly with a screw cap fitted with a Teflon gasket and heated to 165°C for 3 h in a preheated thermostatic oil bath. High performance liquid chromatography (HPLC) was used to determine the concentration of each compound present in the lignin. There were eight compounds detected in the HPLC chromatogram. The crystallization process was then used as a method to separate vanillin from other compounds. Based on the solubility of vanillin in acetone, 15 mL of acetone was added to the residue of the oxidized products and heated to 60°C for 10 min. A yield of 1.6% vanillin was isolated from a 50 mg lignin sample. The isolated compound was analyzed with HPLC, Fourier transform infrared spectrophotometry (FT‐IR) and nuclear magnetic resonance (¹³C‐NMR) for structural verification. The results of the characterization studies proved that the isolated compound is vanillin.     

Prediction of long-term settlement on soft clay using shear wave velocity and damping characteristics

This paper presents a method of calculating long-term settlement of a loaded pad on soft clay at Klang, Selangor, Malaysia where the soil model is treated as an anelastic material of viscoelastic property. Initially, an elastic shear modulus (G) value from shear wave velocity profiles of the seismic tests from spectral analysis of surface wave (SASW) and continuous surface wave (CSW) tests was obtained. A value of damping (D) at an equivalent elastic strain is then calculated from the hysteresis of the plate load tests corrected to equivalent strain using the Damping–Strain formula. The calculated elastic settlement and its equivalent damping are then used to calculate the long-term settlement by applying the generalised viscoelastic formula. Comparisons to traditional methods of settlement predictions were made and the viscoelastic formula has shown better agreement to the observed settlement. Further modification of the settlement formula is introduced to improve the settlement accuracy to 10%.