生态地理学概念界定及其经典案例分析

对生态地理学的概念进行了详细讨论和辨析,并将它与相近学科如生物地理学、生态地理区划、宏生态学等进行了比较分析,界定了生态地理学的概念。研究认为：生态地理学是生态学和地理学的交叉学科,是研究生态系统各组分关系和生态过程的地理空间分布格局或/和时间演变规律及其与地理环境耦合机制的学科。生态地理学的目的是揭示不同环境梯度下或不同时间尺度上生态系统各组分关系和生态过程的普适性规律及其成因。同时,结合国内外野外实验平台介绍,在全球变化等研究领域列举了经典案例进行分析：① 全球不同气候带森林凋落物分解和碳汇功能的研究;② 中国不同陆地生态系统碳通量和碳汇功能研究;③ 中国东北样带和南北样带陆地生态系统的脆弱性与适应性研究;④ 中国北方草地样带尺度的生态系统生态学研究。主要目的是在辨析生态地理学概念的基础上指出未来发展方向,推动生态地理学的发展。     

“地理素养与测绘技能”双驱动的GIS专业大学生创新能力培养模式的探索

在信息技术快速发展和万众创新、大众创业的时代背景下，创新与创新人才已成为国家发展的重要推动力，创新教育和创新人才培养成为高校的重要任务。本文以武汉大学地理信息科学（GIS）专业为例，结合专业特点和优势，探索了"地理素养、测绘技能"驱动下的GIS专业大学生创新能力的培养模式和"厚基础、重知识、强技能"的贯通式培养途径。围绕创新人才培养和成长的内在因素和外部条件，从人才培养方案与课程体系、创新型教师团队与新型教学方法、教学科研创新平台与创新条件、创新人才发展评价与激励机制等4个方面开展了创新型发展探索。结合实践表明，本模式取得了显著的创新成果，产生了良好的示范辐射作用。     

自然和自然贡献情景模型研究综述

本文回顾了自然和自然贡献情景模型发展的背景、历史和内容,概括总结了自然和自然贡献情景模型的发展进程以及联合国生物多样性与生态系统服务政府间科学—政策平台(IPBES)情景模型的概念框架,讨论了自然和自然贡献情景模型存在的问题和发展方向。为了在全球层面解决现有综合集成模型存在的问题,根据地球表层建模基本定理和生态环境曲面建模基本定理,提出了具有中国原创特点的自然与自然贡献情景模型概念框架。     

三元插层材料的合成及其在聚丙烯老化中的应用

以FeCl3?6H2O、NiCl2?6H2O、MgCl2?6H2O为原料，以NaOH为沉淀剂采用水热法合成了镁镍铁水滑石 (MgNiFe-LDH)，通过X射线衍射 (XRD)、傅里叶变换红外光谱 (FTIR) 和扫描电镜 (SEM) 分析了MgNiFe-LDH结构及形貌，探讨了不同陈化时间和水热温度对MgNiFe-LDH合成的影响。将制得的MgNiFe-LDH添加至聚丙烯 (PP) 中，制备MgNiFe-LDH/PP复合材料，通过对材料的加速老化测其力学性能，研究了添加MgNiFe-LDH前后材料力学性能的差异。研究结果表明，当Mg2+:Ni2+:Fe3+=2:1:1，反应温度为140℃、陈化时间为24 h时，合成的MgNiFe-LDH为片状，形貌较为规整，颗粒粒径约为2μm；经加速老化后，填充MgNiFe-LDH 复合材料的抗老化性能优于纯PP，当MgNiFe-LDH的填充量为6 wt% 复合材料拉伸强度不变，可明显提高PP的抗老化性能。     

Microwave Type III Burst Group in the 1993 October 2 Flare

Microwave Type III bursts with positive frequency drifting rate were found by Stahli and Benz (1987) for first time. Type III events are especially interesting because they are well-known to be signatures of electron beams in coronal plasma, and they are effective means for diagnosting of source plasma. A microwave burst consisting of some microwave type III burst groups was registered at Beijing Astronomical Observatory with the 2545–2645–2840 MHz synchronous observing system. The distributions of frequency drifting rate, half power duration, and intensity for each impulse in the groups have been statistically analysed. From this analysis, some important parameters for the dynamic process in the flare are deduced and discussed.     

三峡重庆库区深部地球物理特征与断裂构造

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。     

A New Solar Radio Spectrometer at 1.10-2.06 GHz and First Observational Results

An improved Solar Radio Spectrometer working at 1.10-2.06 GHz with much improved spectral and temporal resolution, has been accomplished by the National Astronomical Observatories and Hebei Semiconductor Research Institute, based on an old spectrometer at 1-2 GHz. The new spectrometer has a spectral resolution of 4 MHz and a temporal resolution of 5ms, with an instantaneous detectable range from 0.02 to 10 times of the quiet Sun flux. It can measure both left and right circular polarization with an accuracy of 10% in degree of polarization. Some results of preliminary observations that could not be recorded by the old spectrometer at 1-2 GHz are presented.     

Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

试论质量体系有效性的保持

提出了保持质量体系有效运行的前提和基础 ,关键和保证措施 ,并指出了组织企业保持质量体系持续有效的方法和途径。