Fracture roughness and thermal exchange: A case study at Soultz-sous-Forêts

Heat exchange during laminar flow in an open fracture is studied numerically on the basis of the Stokes equation in the limit of hydrothermal lubrication. We examine the influence of fracture roughness on hydraulic permeability and heat flux through the fracture sides when a cold fluid is injected into a homogeneous hot host rock. Spatial temperature fluctuations inside the fluid are studied assuming the temperature of the rock to be constant and the fracture aperture to be self-affine. An application to the case study at the deep geothermal reservoir of Soultz-sous-Forêts, France, is presented. Finally, a thermal model based on sparse spatial information of the geometrical aperture is successfully proposed to reproduce the response of the fracture.     

The information system of the French Peatland Observation Service: Service National d'Observation Tourbières – A valuable tool to assess the impact of global changes on the hydrology and biogeochemistry of temperate peatlands through long term monitoring

Mitigating and adapting to global changes requires a better understanding of the response of the Biosphere to these environmental variations. Human disturbances and their effects act in the long term (decades to centuries) and consequently, a similar time frame is needed to fully understand the hydrological and biogeochemical functioning of a natural system. To this end, the ‘Centre National de la Recherche Scientifique’ (CNRS) promotes and certifies long-term monitoring tools called national observation services or ‘Service National d'Observation’ (SNO) in a large range of hydrological and biogeochemical systems (e.g., cryosphere, catchments, aquifers). The SNO investigating peatlands, the SNO ‘Tourbières’, was certified in 2011 ( https://www.sno-tourbieres.cnrs.fr/ ). Peatlands are mostly found in the high latitudes of the northern hemisphere and French peatlands are located in the southern part of this area. Thus, they are located in environmental conditions that will occur in northern peatlands in coming decades or centuries and can be considered as sentinels. The SNO Tourbières is composed of four peatlands: La Guette (lowland central France), Landemarais (lowland oceanic western France), Frasne (upland continental eastern France) and Bernadouze (upland southern France). Thirty target variables are monitored to study the hydrological and biogeochemical functioning of the sites. They are grouped into four datasets: hydrology, fluvial export of organic matter, greenhouse gas fluxes and meteorology/soil physics. The data from all sites follow a common processing chain from the sensors to the public repository. The raw data are stored on an FTP server. After operator or automatic processing, data are stored in a database, from which a web application extracts the data to make them available ( https://data-snot.cnrs.fr/data-access/ ). Each year at least, an archive of each dataset is stored in Zenodo, with a digital object identifier (DOI) attribution ( https://zenodo.org/communities/sno_tourbieres_data/ ).     

Effect of zinc sacrificial anode degradation on the defence system of the Pacific oyster, Crassostrea gigas: Chronic and acute exposures

Two types of exposures were performed to assess the effects of zinc released from sacrificial anode degradation: a chronic exposure, in which oysters were exposed to 0.53±0.04mgZnL(-1) for 10weeks, and an acute exposure, where oysters were exposed to 10.2±1.2mgZnL(-1) for 1week. At the end of the acute exposure experiment, 81.8% mortality was recorded. In contrast, no mortality was detected after 10weeks exposure. Moreover, all of the immune system biomarkers studied, except the number of circulating haemocytes, were stimulated by a moderate level of zinc and inhibited by a high level. Our exposure conditions did not induce SOD or MXR mRNA expression in gills and digestive gland. However, an increase of MT mRNA is observed in these tissues. The results indicate that oysters are sensitive to acute zinc toxicity but are only moderately affected by a mild zinc concentration.     

The Mechanical Coupling of Fluid-Filled Granular Material Under Shear

The coupled mechanics of fluid-filled granular media controls the physics of many Earth systems, for example saturated soils, fault gouge, and landslide shear zones. It is well established that when the pore fluid pressure rises, the shear resistance of fluid-filled granular systems decreases, and, as a result, catastrophic events such as soil liquefaction, earthquakes, and accelerating landslides may be triggered. Alternatively, when the pore pressure drops, the shear resistance of these geosystems increases. Despite the great importance of the coupled mechanics of grain–fluid systems, the basic physics that controls this coupling is far from understood. Fundamental questions that must be addressed include: what are the processes that control pore fluid pressurization and depressurization in response to deformation of the granular skeleton? and how do variations of pore pressure affect the mechanical strength of the grains skeleton? To answer these questions, a formulation for the pore fluid pressure and flow has been developed from mass and momentum conservation, and is coupled with a granular dynamics algorithm that solves the grain dynamics, to form a fully coupled model. The pore fluid formulation reveals that the evolution of pore pressure obeys viscoelastic rheology in response to pore space variations. Under undrained conditions elastic-like behavior dominates and leads to a linear relationship between pore pressure and overall volumetric strain. Viscous-like behavior dominates under well-drained conditions and leads to a linear relationship between pore pressure and volumetric strain rate. Numerical simulations reveal the possibility of liquefaction under drained and initially over-compacted conditions, which were often believed to be resistant to liquefaction. Under such conditions liquefaction occurs during short compactive phases that punctuate the overall dilative trend. In addition, the previously recognized generation of elevated pore pressure under undrained compactive conditions is observed. Simulations also show that during liquefaction events stress chains are detached, the external load becomes completely supported by the pressurized pore fluid, and shear resistance vanishes.     

Stress sensitivity of stylolite morphology

Stylolites are rough surfaces that form by localized stress-induced dissolution. Using a set of limestone rock samples collected at different depths from a vertical section in Cirque de Navacelles (France), we study the influence of the lithostatic stress on the stylolites morphology on the basis of a recent morphogenesis model. We measured the roughness of a series of bedding-parallel stylolites and show that their morphology exhibits a scaling invariance with two self-affine scaling regimes separated by a crossover-length (L) at the millimeter scale consistent with previous studies. The importance of the present contribution is to estimate the stylolite formation stress σ from the sample position in the stratigraphic series and compare it to the crossover-length L using the expected relationship: L ～ σ ^?2. We obtained a successful prediction of the crossover behavior and reasonable absolute stress magnitude estimates using relevant parameters: depth of stylolite formation between 300 to 600 m with corresponding normal stress in the range of 10–18 MPa. Accordingly, the stylolite morphology contains a signature of the stress field during formation and we thus suggest that stylolites could be used as paleo-stress gauges of deformation processes in the upper crust.     

Assessment of sacrificial anode impact by aluminum accumulation in mussel Mytilus edulis: a large-scale laboratory test

Since the early 1960s, the application of aluminum alloy sacrificial anodes to mitigate marine corrosion has been well known. The aim of this work was to study aluminum bioconcentration in Mytilus edulis by an in vitro test performed in two tanks: the first containing non-contaminated water (NCW) and the second containing aluminum-contaminated water (CW) (530 μg L⁻¹) released by sacrificial anode. The mussels were collected and examined over a period of 8 weeks. A comparison between the aluminum concentrations in the digestive glands of mussels from the CW and NCW tanks shows that the highest value (1700 mg/kg d.w.) was found in the CW mussels collected after 13 days. In NCW, the mean aluminum concentration in digestive glands during the test was 281 mg/kg d.w. The rapid concentration decrease in digestive glands is probably due to the inhibition of filtering activity due to valve closure at the high concentration as well as the induction of the detoxification response.     

Quake Catalogs from an Optical Monitoring of an Interfacial Crack Propagation

Using an experimental setup which allows to follow optically the propagation of an interfacial crack front in a heterogeneous medium, we show that the fracture front dynamics is governed by local and irregular avalanches with large velocity fluctuations. Events defined as high velocity bursts are ranked in catalogs with analogous characteristics to seismicity catalogs: time of occurence, epicenter location and energy parameter (moment). Despite differences in the fracturing mode (opening for the experiments and shear rupture for earthquakes), in the acquisition mode and in the range of time scales, the distributions of moment and epicenter jumps in the experimental catalogs obey the same scaling laws with exponents similar to the corresponding distributions for earthquakes. The record-breaking event analysis also shows very strong similarities between experimental and real seismicity catalogs. The results suggest that the dynamics of crack propagation is controlled by the elastic interactions between microstructures within the material.     

Phenotypic and genetic differentiation in young-of-the-year common sole (Solea solea) at differentially contaminated nursery grounds

Growth-related characters, condition factor, and genetic differentiation were investigated for a single cohort of young-of-the-year (YOY) sole within and among nurseries with differing levels of heavy metals (Cd, Cu and Zn) contamination in the two Charentais Straits, Bay of Biscay, France. Analyses were performed when individuals recruited (May), then after a full summer spent in each nursery (October). Levels of phenotypic and genetic diversity were compared, together with genetic differentiation at a candidate metallothionein (MT) locus and three putatively neutral microsatellite loci. No phenotypic or genetic differentiation was detected among nurseries in May, but significant variation at each phenotypic trait and at the multilocus level in October (P < 0.001). Single locus analysis demonstrated that only the MT locus was significantly differentiated among nurseries, whether corrected for null alleles or not (θ=0.0401 and θ(corr.FreeNA)=0.0326, respectively; P < 0.001). Results indicate that phenotypic differences among YOY sole nurseries present a molecular correlate acting at identical spatio-temporal scales among nurseries, potentially reflecting differential selective pressure among nurseries in response to contamination.     

Surface processes and tectonics: Forcing of continental subduction and deep processes

It is now well accepted that surface processes provide a critical feedback on the surface tectonic deformation, whatever it is, orogenic building or basin evolution. However, the idea that the influence of these processes may go below the crustal levels, is less common. In this preliminary study, we use coupled thermo-mechanical numerical models to investigate the possible influence of surface processes on the styles of continental collision, in particular, continental subduction. For that, we further exploit the recent successful model of continental subduction of the early stages of India–Asia collision by Toussaint et al. [Toussaint G., Burov, E., and J.-P. Avouac, Tectonic evolution of a continental collision zone: a thermo-mechanical numerical model, Tectonics, 23, TC6003, doi:10.1029/2003TC001604, 2004b.]. On the example of India–Asia-like settings, we show that not only the surface topography but also the total amount of subduction may largely vary as function of denudation rate (controlled by the coefficient of erosion, k). Erosion provides a dynamic discharge of the hanging wall of the major thrust zone, whereas the sedimentation increases loading on the footwall and this helps down-thrusting of the lower plate. Both processes reduce the resistance of the major thrust and subduction channel to subduction. However, very strong or very slow erosion/sedimentation enhance the possibility of plate coupling and promote whole-scale thickening or buckling. The maximal amount of subduction is thus achieved for some intermediate values of erosion rates when the tectonic uplift rate is fine-balanced by the denudation rate. In our case the optimal balance is reached for the values of k on the order of 3000 m²/yr. We then extended our model beyond the conditions of India–Asia collision, in terms of the tested range of k and convergence rates. The experiments suggest that for provided settings, both extra slow (k < 50–100 m²/yr) and extra rapid erosion (k > 6000–8000 m²/yr) limit, by up to 50%, the total amount of subduction, if not totally prevent it. The model demonstrates the large capability of surface processes to adopt to different deformation styles: the orogenic building and subduction successfully develop (subduction number, S > 0.5) in the range of k between 500 m²/yr and 6000 m²/yr at convergence rates ranging from 1 cm/yr to 6 cm/yr. Within this range, some peculiar features of orogenic style such as the geometry of the accretion prism, amount of upper crustal subduction, horizontal progression of the mountain range/thrust fault and the amount of exhumation of metamorphic facies are sometimes quite different. We conclude that surface processes may control deep, mantle level tectonic evolution.