Jason-1: Assessment of the System Performances

On 7 December 2001, Jason-1 was successfully launched by a Boeing Delta II rocket from the Vandenberg Air Force Base, California. The Jason-1 satellite will maintain the high accuracy altimeter service provided since 1992 by TOPEX/Poseidon (T/P), ensuring the continuity in observing and monitoring the Ocean Dynamics (intraseasonal to interannual changes, mean sea level, tides, etc.). Despite one-fourth the mass and power, the Jason-1 system has been designed to have basically the same performance as T/P, measuring sea surface topography at a centimetric level. This new CNES/NASA mission also provides near real-time data for sea state and ocean forecast. The first two months of the Jason-1 mission have been dedicated to the assessment of the overall system. The goals of this assessment phase were:

1. To assess the behavior of the spacecraft at the platform and payload levels (Jason-1 being the first program to call on the PROTEUS versatile multimission platform for Low and Medium Earth Orbit Missions developed in partnership between Alcatel Space and CNES);

2. To verify that platform performance requirements are met with respect to Jason-1 requirements;

3. To verify that payload instruments performance requirements evaluated at instrument level are met;

4. To assess the performance of the Jason-1 Ground System.

This article will display the main outputs of the assessment of the system. It will demonstrate that all the elements of the onboard and ground systems are within the specifications. Provision of data to the Jason-1 Science Working Team started at the end of March 2002. This is the goal of a six-month phase after closure of the initial assessment phase to derive the error budget of the system in terms of altimetry user products.     

Evidence for the depletion of ammonia in the Uranus atmosphere

The theoretical disk brightness temperature spectra for Uranus are computed and compared with the observed microwave spectrum. It is shown that the emission observed at short centimeter wavelengths originates deep below the region where ammonia would ordinarily begin to condense. We demonstrate that this result is inconsistent with a wide range of atmospheric models in which the partial pressure of NH₃ is given by the vapor-pressure equation in the upper atmosphere. It is estimated that the ammonia mixing ratio must be less than 10^?6 in the 150 to 200°K temperature range. This is two orders of magnitude less than the expected mixing ratio based on solar abundances. The evidence for this depletion and a possible explanation are discussed.     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Lake-Level Fluctuations and Small-Scale Vegetation Patterns During the Late Glacial in The Netherlands

Late glacial changes in the vegetation were studied in and around a former lake on the southeastern side of a coversand ridge near Milheeze (southern Netherlands). Analyses of microfossils and macroremains and AMS ¹⁴C dating were performed on four sediment cores along a transect from sand ridge to the lake centre. Small-scale vegetation patterns and lake-level fluctuations were reconstructed in detail based on the information provided by the transect. For the first time in The Netherlands, cores along a transect within one lake were used to reconstruct the amplitude of late glacial lake-level fluctuations. Near Milheeze, a small and shallow lake was formed during the Bølling. The large increase in the water level during the Bølling and early Allerød, and the transition to more eutrophic conditions at the start of the Allerød, were probably related to the disappearance of permafrost. During the Allerød, open birch and pine woodlands developed in the area. In the lake, organic deposits accumulated, and the lake size and depth fluctuated. At the start of the Younger Dryas, higher lake water levels were recorded and woodlands became more open as a result of both a drop in the temperature and an increase in the effective precipitation. During the late Younger Dryas the lake water level dropped as the climate became drier and temperatures slightly increased. Accumulation of organic deposits in the lake ceased at the end of the Younger Dryas, which was caused by a drop in the water level in combination with the hydroseral succession process within the lake itself. The climatic signal reflected in the late glacial flora and lake-level fluctuations agree well with other published data from The Netherlands.     

Cassini SAR, radiometry, scatterometry and altimetry observations of Titan’s dune fields

Large expanses of linear dunes cover Titan’s equatorial regions. As the Cassini mission continues, more dune fields are becoming unveiled and examined by the microwave radar in all its modes of operation (SAR, radiometry, scatterometry, altimetry) and with an increasing variety of observational geometries. In this paper, we report on Cassini’s radar instrument observations of the dune fields mapped through May 2009 and present our key findings in terms of Titan’s geology and climate. We estimate that dune fields cover ∼12.5% of Titan’s surface, which corresponds to an area of ∼10 million km², roughly the area of the United States. If dune sand-sized particles are mainly composed of solid organics as suggested by VIMS observations (Cassini Visual and Infrared Mapping Spectrometer) and atmospheric modeling and supported by radiometry data, dune fields are the largest known organic reservoir on Titan. Dune regions are, with the exception of the polar lakes and seas, the least reflective and most emissive features on this moon. Interestingly, we also find a latitudinal dependence in the dune field microwave properties: up to a latitude of ∼11°, dune fields tend to become less emissive and brighter as one moves northward. Above ∼11° this trend is reversed. The microwave signatures of the dune regions are thought to be primarily controlled by the interdune proportion (relative to that of the dune), roughness and degree of sand cover. In agreement with radiometry and scatterometry observations, SAR images suggest that the fraction of interdunes increases northward up to a latitude of ∼14°. In general, scattering from the subsurface (volume scattering and surface scattering from buried interfaces) makes interdunal regions brighter than the dunes. The observed latitudinal trend may therefore also be partially caused by a gradual thinning of the interdunal sand cover or surrounding sand sheets to the north, thus allowing wave penetration in the underlying substrate. Altimetry measurements over dunes have highlighted a region located in the Fensal dune field (∼5° latitude) where the icy bedrock of Titan is likely exposed within smooth interdune areas. The hemispherical assymetry of dune field properties may point to a general reduction in the availability of sediments and/or an increase in the ground humidity toward the north, which could be related to Titan’s asymmetric seasonal polar insolation. Alternatively, it may indicate that either the wind pattern or the topography is less favorable for dune formation in Titan’s northern tropics.     

Correlations between VIMS and RADAR data over the surface of Titan: Implications for Titan’s surface properties

We apply a multivariate statistical method to Titan data acquired by different instruments onboard the Cassini spacecraft. We have searched through Cassini/VIMS hyperspectral cubes, selecting those data with convenient viewing geometry and that overlap with Cassini/RADAR scatterometry footprints with a comparable spatial resolution. We look for correlations between the infrared and microwave ranges the two instruments cover. Where found, the normalized backscatter cross-section obtained from the scatterometer measurement, corrected for incidence angle, and the calibrated antenna temperature measured along with the scatterometry echoes, are combined with the infrared reflectances, with estimated errors, to produce an aggregate data set, that we process using a multivariate classification method to identify homogeneous taxonomic units in the multivariate space of the samples.In medium resolution data (from 20 to 100 km/pixel), sampling relatively large portions of the satellite’s surface, we find regional geophysical units matching both the major dark and bright features seen in the optical mosaic. Given the VIMS cubes and RADAR scatterometer passes considered in this work, the largest homogeneous type is associated with the dark equatorial basins, showing similar characteristics as each other on the basis of all the considered parameters.On the other hand, the major bright features seen in these data generally do not show the same characteristics as each other. Xanadu, the largest continental feature, is as bright as the other equatorial bright features, while showing the highest backscattering coefficient of the entire satellite. Tsegihi is very bright at 5 μm but it shows a low backscattering coefficient, so it could have a low roughness on a regional scale and/or a different composition. Another well-defined region, located southwest of Xanadu beyond the Tui Regio, seems to be detached from the surrounding terrains, being bright at 2.69, 2.78 and 5 μm but having a low radar brightness. In this way, other units can be found that show correlations or anti-correlations between the scatterometric response and the spectrophotometric behavior, not evident from the optical remote sensing data.     

Constraints on the composition of the Venus atmosphere from microwave measurements near 1.35 cm wavelength

The determination of the brightness temperature of Venus near 1.35 cm wavelength is reviewed. The observed brightness temperature is compared with models for the microwave emission based on the physical and chemical structure of the atmosphere as obtained from spacecraft. Upper limits are set on the concentrations of microwave-absorbing minor constituents. In particular, upper limits are determined for SO₂ (180 ppm) and H₂O (0.3%) for a mixing-ratio profile that is uniformly mixed up to the cloud bottom at 50 km and is rapidly depleted ($\text{scale height}\text{? 1}\text{km}\text{)}$ at higher altitudes. The total optical depth of the cloud region at or above 50 km is <0.17 at 1.35 cm wavelength. The SO₂ upper limit is only in marginal agreement with the spacecraft results, and it may be that the latter have been overestimated, or that the distribution of SO₂ is more complex than given by the uniform mixing model.     

Titan's surface at 2.2-cm wavelength imaged by the Cassini RADAR radiometer: Calibration and first results

The first comprehensive calibration and mapping of the thermal microwave emission from Titan's surface is reported based on radiometric data obtained at 2.2-cm wavelength by the passive radiometer included in the Cassini Radar instrument. The data reported were accumulated from 69 separate observational segments in Titan passes from Ta (October 2004) through T30 (May 2007) and include emission from 94% of Titan's surface. They are diverse in the key observing parameters of emission angle, polarization, and spatial resolution, and their reduction into calibrated global mosaic maps involved several steps. Analysis of the polarimetry obtained at low to moderate resolution (50+ km) enabled integration of the radiometry into a single mosaic of the equivalent brightness temperature at normal incidence with a relative precision of about 1 K. The Huygens probe measurement of Titan's surface temperature and radiometry obtained on Titan's dune fields allowed us to infer an absolute calibration estimated to be accurate to a level approaching 1 K. The results provide evidence for a surface that is complex and varied on large scales. The radiometry primarily constrains physical properties of the surface, where we see strong evidence for subsurface (volume) scattering as a dominant mechanism that determines the emissivity, with the possibility of a fluffy or graded-density surface layer in many regions. The results are consistent with, but not necessarily definitive of a surface composition resulting from the slow deposition and processing of organic compounds from the atmosphere.