雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

Results from several persistent train spectra intercompared

Some results following from two contemporary photographical programs (Slovakia and Japan) for persistent meteor train spectra are compared. It shows that even though both programs are not too different according to their lenses and films used, the spectral interval detected is very different. In this respect prism as a dispersion element is more favourable than the grating with blaze wavelength near 610 nm. However, some results previously assumed as typicai for presented persistent trains-e.g. the forbidden Herzberg O₂ emission, the NO₂ continuum and OH red emissions-seem to be substanciated especially due to higher and linear dispersion of those grating spectra.     

Comments on ‘A comparative study of ANN and neuro-fuzzy for the prediction of dynamic constant of rockmass’

Singh et al (2005) examined the potential of the ANN and neuro-fuzzy systems application for the prediction of dynamic constant of rockmass. However, the model proposed by them has some drawbacks according to fuzzy logic principles. This discussion will focus on the main fuzzy logic principles which authors and potential readers should take into consideration.     

Triple diagram method for the prediction of wave height and period

Many formulations have been developed so far to predict the wave height and period from fetch length and wind blowing duration for a constant wind speed. This study aimed to predict wave parameters from fetch length and meteorological factors by using triple diagram methodology based on Kriging principles. Proposed model results were compared with Joint North Sea Wave Project (JONSWAP) model which is used so commonly in the ocean and coastal engineering studies. For the implementation of the methodology hourly wave and wind data were obtained from a buoy located in Lake Ontario. Numerical and graphical comparisons demonstrated that the proposed method outperforms the classical formulation.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Die Rheingrabenrandverwerfung im Wattkopftunnel bei Ettlingen (Nordschwarzwald)

The Wattkopftunnel, near Ettlingen (Nordschwarzwald), drives through the eastern margin of the Rheingraben. The tunnel passes cenozoic and mesozoic sediments. Early quarternary and tertiary beds are situated west of the main thrust of the Rheingraben. Fossil record indicates upper Oligocene age (Chatt) for parts of the tertiary sediments. At the eastern border of the Rheingraben, wedges of jurassic and middle triassic series are squeezed. East of the Rheingraben the tunnel drives in the lower triassic Bausandstein. The eastern margin of the Rheingraben was investigated in detail during tunneling. Faults of the Rheingraben margin are distributed in an 130 meter wide fault zone in the tunnel. Total stratigraphic separation by the normal faults reaches more than 2 000 meters. The cenozoic sequence suffered synsedimentary to early diagenetic deformation, while the mesozoic series are characterized by ruptural deformation. The fault- and joint system is directed in the rheinische Richtung (SSW-NNE). East of the Rheingraben a second direction occur, running parallel to the lower Albtal (W-E).

     

Damage risk assessment of breakwaters under tsunami attack

Turkey was struck by two major events on 17 August and 12 November 1999, named Izmit (M _w = 7.4) and Düzce (M _w = 7.2) earthquakes, respectively. Rubble mound breakwaters in Izmit Bay experienced little damage, as forecasted by the new risk assessment model in which tsunami occurrence risk was included in the damage estimations. In order to determine the occurrence probability of structural damage under design conditions, including the environmental loading parameters of tsunami and storm waves, tidal range and storm surge, the Conditional Expections Monte Carlo simulation was applied in the risk assessment model developed in this study for the Esenköy Fishery Harbour, Turkey. A tsunami was not the key design parameter when compared to storm waves for the main breakwater of the harbour, however, in places with great seismic activity, the tsunami risk should be important depending on the occurrence probability and magnitude of the tsunami.     

Petrology and geochemistry of orthoamphibolites from the Variscan metamorphic sequences of the South Tisia in Croatia – an overview with geodynamic implications

In the southern Pannonian Basin, the Variscan Barrovian- and overprinted Abukuma-type progressive metamorphic sequences of the South Tisia in Slavonian Mts. (SM) and Mt. Moslava)ka Gora (MG) are interlayered with orthoamphibolites. These sequences represent part of a disrupted Variscan belt that extends southeastwards of the Bohemian Massif through the Carpathians to the Caucasus. Orthoamphibolites contain hornblende (Mg-hornblende, tschermakite, pargasite, and edenite), plagioclase An_48-98 (MG) and An_26-35 (SM), biotite, grossular (MG) and almandine (SM) enriched garnet, diopside (MG), with accessory ilmenite, titanite, and clinozoisite. Based on major and trace element analyses and CIPW norms, these orthoamphibolites, which originally were olivine tholeiites to slightly alkalic basalts, can be correlated with tholeiites of consuming plate margins. '¹⁸O of orthoamphibolites varies from 5.8 to 7.1‰, the measured ⁸⁷Sr/⁸⁶Sr ratio from 0.70435 to 0.70665, which indicates slight continental crust contamination, and the calculated ratio from 0.70262 to 0.70535, indicating an upper mantle origin of the original basaltic melts. For associated penecontemporaneous I-type granitoids, the calculated initial ⁸⁷Sr/⁸⁶Sr ratio also have upper mantle values ranging between 0.70293 and 0.70368. Geochemical data for orthoamphibolites and the associated penecontemporaneous I-type granites, and the occurrence of alpine-type ultramafic bodies within the Barrovian sequence, indicate that they have many features in common with orogenic associations related to recent subduction-related settings. Some characteristic element ratios suggest back-arc basin environments and the Ce/K vs. Ce diagram suggests a pargasite-lherzolite source. Its partial melting gave primitive basaltic melts of olivine tholeiite to slight alkalic affinities that produced at first differentiated mafic rocks by olivine fractionation (future orthoamphibolites) and, afterwards, a strongly differentiated suite of I-type granitoids by amphibole fractionation. Magma emplacement and subsequent AFC processes took place in subduction environments preceding the main Variscan deformational metamorphic event during which orthoamphibolites were generated. This interpretation is compatible with geodynamic modeling of this part of the Paleotethys.     

β-环糊精包合态三氟氯氰杀虫剂的制备

为了进一步提高三氟氯氰菊酯农药的防治效果。寻找适宜的农药新剂型，我们用液相法制备了三氟氯氰菊酯－β－环糊精包合物，并以水为基质进行了稳定性观察，同时又以差热分析法和气相色谱法确认了包合物的形成，以旋光度法证明两者间的包合比。结果表明，三氟氯氰菊酯与β-环糊精可形成1：1型包合物，该包合物稳定性高，具有一定的水溶性，而且在水中稳定，所以有望通过环糊 包合作用将三氟氯氰菊酯帛成水剂；当以气相法测试包合态三氟氯氰菊酯含量时，必须将其解络，使之成为游离状态，然后按常规方法进行含量测定。