Kinematics of the eastern part of the North Anatolian Fault Zone

The North Anatolian Fault Zone (NAFZ), which marks the boundary between Anatolia and the Eurasian plate, is one of the world's most seismically active structures. Although the eastern part of NAFZ has high seismic hazard, there is a lack of geodetic information about the present tectonics of this region. Even though many scientists would like to study this area, geographical and logistical problems make performing scientific research difficult. In order to investigate contemporary neotectonic deformation on the eastern NAFZ and in its neighborhood, a relatively dense Global Positioning System (GPS) monitoring network was established in 2003. Geodetic observations were performed in three GPS campaigns in an area of 350 km × 200 km with 12-month intervals. In addition, 14 new GPS stations were measured far from the deforming area. Since this region includes the intersection of the NAFZ and the East Anatolian Fault Zone (EAFZ), deformation is complex and estimating seismic hazard is difficult. One important segment is the Yedisu segment and it has not broken since the 1784 earthquake. After the 1992 Erzincan and 2003 Pulumur earthquakes, the Coulomb stress loading on the Yedisu segment of the NAFZ has increased significantly, emphasizing the need to monitor this region. We computed the horizontal velocity field with respect to Eurasia and strain rates field as well. GPS-derived velocities relative to Eurasia are in the range of 16–24 mm/year, which are consistent with the regional tectonics. The principal strain rates were derived from the velocity field. Results show that strain is accumulating between the NAFZ and EAFZ along small secondary fault branches such as the Ovacik Fault (OF).     

Landfill site selection and landfill liner design for Ankara, Turkey

Considering the high population growth rate of Ankara, it is inevitable that landfill(s) will be required in the area in the near future to sustain the sanitary waste disposal needs of the city. The main scope of this study is to select alternative landfill sites for Ankara based on the growing trends of Ankara toward the northwest, particularly toward the Sincan municipality, and to eventually select the best alternative through utilizing multi-criteria decision making. Landfill site selection was carried out utilizing Geographic Information System (GIS) and Multi-Criteria Decision Analysis. A number of criteria, namely, settlement, slope, proximity to roads, geology, availability and proximity of landfill containment material (i.e., clay for composite lining system), suitability for agriculture, erosion, vegetation cover and lineament system were gathered in a GIS environment. Each criterion was assigned a weight value by applying the Pairwise Comparison Method and the Analytical Hierarchy Method. In order to choose the best alternative, the Technique for Order Preference by Similarity to the Ideal Solution, which is regarded as an ideal point method, was applied and a landfill site was selected. The geotechnical properties of the so-called “Ankara clay” that shows widespread distribution in Ankara were reviewed and assessed for its suitability as a compacted clay liner.     

Development of a geotechnical and geophysical database for seismic zonation of the Ankara Basin,Turkey

The Kocaeli earthquake (M _w = 7.4) of 17 August 1999 occurred in the Eastern Marmara Region of Turkey along the North Anadolu Fault and resulted in a very serious loss of life and property. One of the most important geotechnical issues of this event was the permanent ground deformations because of both liquefaction and faulting. These deformations occurred particularly along the southern shores of ?zmit Bay and Sapanca Lake between the cities of Yalova and Adapazar? in the west and east, respectively. In this study, three sites founded on delta fans, namely De?irmendere Nose, Yeniköy tea garden at Seymen on the coast of ?zmit Bay, and Vak?f Hotel site on the coast of Sapanca Lake were selected as typical cases. The main causes of the ground deformations at these sites were then investigated. Geotechnical characterization of the ground, derivation of displacement vectors from the pre- and post-earthquake aerial photographs, liquefaction assessments based on field performance data, and analyses carried out using the sliding body method have been fundamental in this study. The displacement vectors determined from photogrammetric evaluations conducted at De?irmendere and Seymen showed a combined movement of faulting and liquefaction. But except the movements in the close vicinity of shorelines, the dominant factor in this movement was faulting. The results obtained from the analyses suggested that the ground failure at De?irmendere was a submarine landslide mainly because of earthquake shaking rather than liquefaction. On the other hand, the ground failures at the Yeniköy tea garden on the coast of Seymen and the hotel area in Sapanca town resulted from liquefaction-induced lateral spreading. It was also obtained that the ground deformations estimated from the sliding body method were quite close to those measured by aerial photogrammetry technique.     

Index to Volume 6

Authors Index

Index to Volume 6     

A linear mathematical model for the seismic inplane behaviour of brick masonry walls part 2: Determination of model parameters through optimization using experimental data

The parameters appearing in the mixture and effective modulus models proposed in Part 1 are determined through optimization by matching theoretical and experimental responses. The optimization analysis is performed in frequency space. The response quantities chosen to be matched are the complex frequency response functions (experimental and theoretical) relating the Fourier transforms of top and base accelerations of the wall. Computations in optimization analysis are carried out by introducing an object (error) function and minimizing it using the Gauss-Newton method. The results show that the mixture model is capable of predicting accurately the dynamic response of masonry walls up to a frequency which is well above the second modal frequency, whereas the effective modulus model describes the wall behaviour only up to the first modal frequency. Furthermore, it is shown that the mixture model is still valid when micro cracks, which may exist between the mortar and brick constituents, are present.     

Generalized force vectors for multi‐mode pushover analysis

A generalized pushover analysis (GPA) procedure is developed for estimating the inelastic seismic response of structures under earthquake ground excitations. The procedure comprises applying different generalized force vectors separately to the structure in an incremental form with increasing amplitude until a prescribed seismic demand is attained for each generalized force vector. A generalized force vector is expressed as a combination of modal forces, and simulates the instantaneous force distribution acting on the system when a given response parameter reaches its maximum value during dynamic response to a seismic excitation. While any response parameter can be selected arbitrarily, generalized force vectors in the presented study are derived for maximum interstory drift parameters. The maximum value of any other response parameter is then obtained from the envelope of GPAs results. Each nonlinear static analysis under a generalized force vector activates the entire multi‐degree of freedom effects simultaneously. Accordingly, inelastic actions develop in members with the contribution of all ‘instantaneous modes’ in the nonlinear response range. Target seismic demands for interstory drifts at the selected stories are calculated from the associated drift expressions. The implementation of the proposed GPA is simpler compared with nonlinear response history analysis, whereas it is less demanding in computational effort when compared with several multi‐mode adaptive nonlinear static procedures. Moreover, it does not suffer from the statistical combination of inelastic modal responses obtained separately. The results obtained from building frames have demonstrated that GPA is successful in estimating maximum member deformations and member forces with reference to the response history analysis. When the response is linear elastic, GPA and response spectrum analysis produce identical results. Copyright © 2010 John Wiley & Sons, Ltd.