Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

Symplectic Mappings of Co-orbital Motion in the Restricted Problem of Three Bodies

The dynamics of co-orbital motion in the restricted three-body problem are investigated by symplectic mappings. Analytical and semi-numerical mappings have been developed and studied in detail. The mappings have been tested by numerical integration of the equations of motion. These mappings have been proved to be useful for a quick determination of the phase space structure reflecting the main characteristics of the dynamics of the co-orbital problem.     

Search For Correlations Between Batse Gamma-Ray Bursts and Supernovae

We report on our statistical research of space–time correlated supernovae and CGRO-BATSE gamma-ray bursts (GRBs). There exists a significantly higher abundance of core-collapse supernovae among the correlated supernovae, but the subset of all correlated objects does not seem to be physically different from the whole set.     

Sedimentary evolution of a Late Pleistocene temperate red algal reef (Coralligène) on Rhodes,Greece: correlation with global sea‐level fluctuations

Autochthonous red algal structures known as coralligène de plateau occur in the modern warm‐temperate Mediterranean Sea at water depths from 20 to 120 m, but fossil counterparts are not so well‐known. This study describes, from an uplifted coastal section at Plimiri on the island of Rhodes, a 450 m long by 10 m thick Late Pleistocene red algal reef (Coralligène Facies), interpreted as being a coralligène de plateau, and its associated deposits. The Coralligène Facies, constructed mainly by Lithophyllum and Titanoderma, sits unconformably upon the Plio‐Pleistocene Rhodes Formation and is overlain by a Maerl Facies (2 m), a Mixed Siliciclastic‐Carbonate Facies (0·2 m) and an Aeolian Sand Facies (2·5 m). The three calcareous facies, of Heterozoan character, are correlated with established members in the Lindos Acropolis Formation in the north of the island, while the aeolian facies is assigned to the new Plimiri Aeolianite Formation. The palaeoenvironmental and genetic‐stratigraphic interpretations of these mixed siliciclastic‐carbonate temperate water deposits involved consideration of certain characteristics associated with siliciclastic shelf and tropical carbonate shelf models, such as vertical grain‐size trends and the stratigraphic position of zooxanthellate coral growths. Integration of these results with electron spin resonance dates of bivalve shells indicates that the Coralligène Facies was deposited during Marine Isotope Stage 6 to 5e transgressive event (ca 135 to 120 ka), in water depths of 20 to 50 m, and the overlying Maerl Facies was deposited during regression from Marine Isotope Stage 5e to 5d (ca 120 to 110 ka), at water depths of 25 to 40 m. The capping Aeolian Sand Facies, involving dual terrestrial subunits, is interpreted as having formed during each of the glacial intervals Marine Isotope Stages 4 (71 to 59 ka) and 2 (24 to 12 ka), with soil formation during the subsequent interglacial periods of Marine Isotope Stages 3 and 1, respectively. Accumulation rates of about 0·7 mm year^?1 are estimated for the Coralligène Facies and minimum accumulation rates of 0·2 mm year^?1 are estimated for the Maerl Facies. The existence of older red algal reefs in the Plimiri region during at least Marine Isotope Stages 7 (245 to 186 ka) and 9 (339 to 303 ka) is inferred from the occurrence of reworked coralligène‐type lithoclasts in the basal part of the section and from the electron spin resonance ages of transported bivalve shells.     

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.     

Type III radio burst productivity of solar flares

We study the occurrence probability of type III radio bursts during flares as a function of the flare position on the Sun. We find that this probability peaks around 30° east of the central meridian, which points to a reciprocal tilt of the average radiation pattern of type IIIs. We argue that anisotropic scattering of the radiation by overdense coronal fibers parallel to the magnetic field is the dominant factor determining the orientation of radiation patterns. It follows that the average magnetic field appears to be tilted 30° west from the vertical. We also find that within a given active region, the average type III production rate of flares peaks 1° west of the center of gravity of all the flares of this active region.We infer that the coronal magnetic field above active regions presents a strong east-west asymmetry, resulting from the well known asymmetry at the photospheric level. As the west side of an active region covers a smaller area with stronger magnetic field than the east side, western flares are generally closer to open field lines than eastern flares. As a consequence, accelerated particles on the trailing (east) side of active regions usually stay trapped in magnetic loops, while on the leading (west) side they are more likely to escape along open lines into interplanetary space. As a result of the initial westward tilt of these open lines, we estimate that the corresponding Archimedean spiral is on average (apparently) rooted 15° west of the flare.     

Design of Inclined Covers with Capillary Barrier Effect

A design procedure is proposed to minimize water infiltration into landfills by optimizing the water diversion length of inclined covers with capillary barrier effect (CCBE). This design procedure is based on a conceptual, mathematical and numerical approach and aims at selecting materials and optimizing layer thickness. Selection among candidate materials is made based on their hydraulic conductivity functions and on a threshold infiltration rate imposed on the designer. The capillary break layer (CBL; bottom layer) is characterized by a weak capillarity, while the moisture retention layer (MRL; upper layer) is characterized by a compromise between strong capillarity and high hydraulic conductivity. The thickness of the CBL corresponds to the height where suction reaches its maximum value for a given infiltration rate. This height can be calculated using the Kisch [Géotechnique 9 (1959)] model. The optimal thickness of the MRL is determined by applying an adaptation of the Ross [Water Resources Research 26 (1990)] model. The results obtained using the proposed design procedure were compared to those obtained from numerical simulations performed using a finite element unsaturated seepage software. The procedure was applied for two cover systems; one where deinking by-products (DBP) were used as MRL and sand as CBL and another where sand was used as MRL and gravel as CBL. Using this procedure, it has been shown that an infiltration control system composed of thin layers of sand over gravel is highly efficient in terms of diversion length and that its efficiency can be enhanced by placing a hydraulic barrier – such as a layer of DBP – above the MRL.     

The multi-component Hekla Ö Tephra,Iceland: a complex widespread mid-Holocene tephra layer

Large Plinian eruptions from Hekla volcano, Iceland, produce compositionally zoned tephra used as key markers in tephrochronology. However, spatial variations in chemical composition of a tephra layer may complicate its identification. An example is the 5950–6180 cal a bp Hekla Ö tephra layer, which shows compositional spread from rhyolite, dacite and andesite to basalt. In soil sections north of Hekla, the SiO₂ content of the tephra glass reaches 76 wt% in the lowest unit of the Hekla Ö deposit and decreases to 62–63 wt% in the uppermost unit. Intermingled within the whole deposit are basalt tephra grains having 46–47 wt% SiO₂. The composition of the basalt glass includes primitive basalt and a more evolved basalt (MgO >6 and <6 wt%, respectively). Together with literature data, the Hekla Ö tephra and the so-called T-Tephra/Hekla-T are most likely from contemporaneous eruptions of different vents on the Hekla volcanic system, forming a single important marker tephra (Hekla ÖT) deposited over 80% of Iceland. Identification is complicated by its spatial compositional heterogeneity, such as systematic decrease in SiO₂ content from the east to the west of Hekla volcano. Consequently, an individual tephra layer from a large explosive eruption can have different composition at different locations. © 2020 John Wiley & Sons, Ltd.     

Rain on snow induced urban floods in cold maritime climate: Risk,indicators and trends

Urban floods pose a societal and economical risk. This study evaluated the risk and hydro-meteorological conditions that cause pluvial flooding in coastal cities in a cold climate. Twenty years of insurance claims data and up to 97 years of meteorological data were analysed for Reykjavík, Iceland (64.15°N; <100 m above sea level). One third of the city's wastewater collection system is combined, and pipe grades vary from 0.5% to 10%. Results highlight semi-intensive rain (<7 mm/h; ≤3 year return period) in conjunction with snow and frozen ground as the main cause for urban flood risk in a climate which undergoes frequent snow and frost cycles (avg. 13 and 19 per season, respectively). Floods in winter were more common, more severe and affected a greater number of neighbourhoods than during summer. High runoff volumes together with debris remobilized with high winds challenged the capacity of wastewater systems regardless of their age or type (combined vs. separate). The two key determinants for the number of insurance claims were antecedent frost depth and total precipitation volume per event. Two pluvial regimes were particularly problematic: long duration (13–25 h), late peaking rain on snow (RoS), where snowmelt enhanced the runoff intensity, elongated and connected independent rainfall into a singular, more voluminous (20–76 mm) event; shorter duration (7–9 h), more intensive precipitation that evolved from snow to rain. Closely timed RoS and cooling were believed to trigger frost formation. A positive trend was detected in the average seasonal snow depth and volume of rain and snowmelt during RoS events. More emphasis, therefore, needs to be placed on designing and operating urban drainage infrastructure with regard to RoS co-acting with frozen ground. Furthermore, more detailed, routine monitoring of snow and soil conditions is important to predict RoS flood events.